Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This is a 1.27mm pitch 1x40 pin female single row SMD header strip with phosphor bronze contacts. Its compact surface-mount design makes it useful for dense PCB layouts where a reliable female receptacle row is needed.

Key Highlights

  • 1.27mm pitch suits compact, high-density PCB layouts
  • Single row of 40 female receptacles for multiple connections
  • Surface-mount (SMD/SMT) design for direct PCB soldering
  • Phosphor bronze contacts with 20mΩ contact resistance
  • PBT UL 94V-0 insulation for flame-retardant support
  • Approximately 51mm long and 2mm wide per strip

Ideal For

  • Electronics hobbyists building compact prototypes
  • PCB designers needing fine-pitch female receptacles
  • Repair technicians replacing 1.27mm headers
  • Makers working on space-constrained projects

Buying Tip

Confirm that your PCB footprint uses a 1.27mm pitch and that you have the tools for surface-mount soldering before ordering.

Elecvora expert review

Our verdict

This 1.27mm female header strip offers a practical way to add a dense row of receptacles to compact PCBs. Its surface-mount design and specified electrical characteristics make it a sensible choice for signal-level connections in space-limited builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Fine 1.27mm pitch saves board space
  • 40 positions in a single row
  • Phosphor bronze contacts with low contact resistance
  • Flame-retardant PBT insulation

Cons

  • Requires surface-mount soldering experience
  • Not intended for high-power applications
  • Mating male headers not included

Best for

Compact PCB projects needing a fine-pitch female receptacle row

Not ideal for

High-current power connections or users without SMD soldering tools

Specifications

ManufacturerGeneric
Pitch Spacing (mm)1.27
Connector TypeHeader Strip
GenderFemale
Mounting TypeSMD/SMT
Contact MaterialPhosphor Bronze
Contact Resistance (ohm)20mΩ
Insulation MaterialPBT UL 94V-0
Insulation Resistance (MOhm)≥1000
Length (mm)51
Width (mm)2
Weight (g)1 (approx) (each)
No. of Rows1
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 1.27mm 1x40 Pin Female Single Row SMD Header Strip

Frequently Asked Questions

What is the pitch of this header strip?
The pitch spacing is 1.27mm, meaning the distance between adjacent contact centres is 1.27mm.
Is this header strip through-hole or surface-mount?
It is surface-mount (SMD/SMT), designed to be soldered directly onto PCB pads rather than inserted through holes.
How many pins does it have?
It has a single row of 40 female positions, often referred to as 1x40 pins.
What are the electrical characteristics?
The contact resistance is 20mΩ and the insulation resistance is ≥1000MΩ. The insulation material is PBT with a UL 94V-0 rating.
What is included in the package?
The package includes one 1.27mm 1x40 pin female single row SMD header strip. No other items are included.
How should I care for this header strip?
Store it in a dry environment and avoid bending the contacts. During soldering, use appropriate temperature and avoid excessive heat to prevent damage to the plastic body.

Overview

The Generic 1.27mm 1x40 Pin Female Single Row Header Strip is a surface-mount receptacle strip designed for compact printed circuit boards. It offers a single row of 40 female positions at a 1.27mm pitch, allowing you to create a mating point for pin headers or component leads in space-constrained designs. The strip is approximately 51mm long and 2mm wide, with each unit weighing around 1g.

Built with phosphor bronze contacts and PBT UL 94V-0 insulation, this header strip is intended for signal-level and low-power board connections where a reliable female interface is required. It is a practical component for prototyping, repair, and small-scale production work.

Key Features

  • 1.27mm pitch: Enables dense packing of connections on compact PCBs.
  • 40 female positions: Provides a full row of receptacles in one strip.
  • Surface-mount design: SMD/SMT mounting allows direct soldering to PCB pads.
  • Phosphor bronze contacts: A common contact material for spring properties and conductivity.
  • PBT UL 94V-0 insulation: Flame-retardant plastic body for added safety.
  • Electrical performance: 20mΩ contact resistance and ≥1000MΩ insulation resistance.

Specifications Explained

Pitch spacing (1.27mm): The distance between adjacent contact centres is 1.27mm, which is half the common 2.54mm pitch. This makes the strip suitable for boards where space is at a premium and a finer connection grid is needed.

Contact resistance (20mΩ): A low contact resistance helps minimise voltage drop across the connection, which is beneficial for signal integrity and low-power circuits.

Insulation resistance (≥1000MΩ): This indicates a high resistance between separate contacts, helping to prevent unintended leakage between adjacent positions.

Insulation material (PBT UL 94V-0): PBT is a durable thermoplastic, and the UL 94V-0 rating means the material is designed to self-extinguish in case of fire.

Dimensions: At roughly 51mm by 2mm, the strip fits neatly along the edge or across a compact board without occupying excessive area.

Compatibility and Requirements

This header strip is designed for surface-mount soldering onto PCBs with matching 1.27mm pitch pads. It provides female receptacles, so it mates with male pin headers or component leads of a suitable size. No additional hardware is included. Soldering equipment and appropriate solder are required for installation.

Typical Uses

  • Creating female connection points on compact microcontroller and sensor boards
  • Board-to-board or board-to-module interconnects in tight enclosures
  • Prototyping and DIY electronics projects requiring a fine-pitch receptacle row
  • Repair or modification of existing PCBs where a 1.27mm female header is needed

What's in the Box

One 1.27mm 1x40 pin female single row SMD header strip is included. No other items are supplied.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
1.27
Connector Type
Header Strip
Gender
Female
Mounting Type
SMD/SMT
Contact Material
Phosphor Bronze
See all specifications