Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This display screen is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The 1.8 Inch 128X160 ILI9163/ST7735 TFT LCD Module With PCB baseboard SPI Serial Port is listed in our display screen range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Features:

- Module with regulator IC supports 3.2V/5V power supply
- With SD card holder, you can do experiments like digital photo frame
- The module reserves the Nokia3310/5110 interface, supports the 1602 interface, and plugs in & out!
- IO for streamlined wiring
- LCD resolution: 128X160, driver IC: ILI9163/ST7735
Wiring:
IO for streamlined wiring: (only 3 IOs after optimization)
1. RST-- directly connected to the microcontroller reset signal terminal, this IO can save
2. D/C--connected to low level, the chip selects long-term effective, this IO can save
3. D/C--connected to IO control register selection
4. DIN--connected to IO control data transmission
5. CLK--connected to IO control SPI bus
6. BL--Connected to the high level 3.3V backlight is always bright, then this IO can save

IO for standard wiring: (6 IO)
1. RST--connected to IO control LCD reset
2. CE--connected to IO control chip selection
3. D/C--connected to IO control register selection
4. DIN--connected to IO control data transmission
5. CLK--connected to IO control SPI bus
6. BL--connect IO control backlight on or off or PWM control brightness
Package Included:
1 x  1.8 Inch LCD Module


Product Safety Information