Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This automobiles & motorcycles is a good fit for makers, students and electronics hobbyists. Main specs: product name Oil Fuel PressureTransducer; material Stainless Steel & Rubber; color Silver & Black. Check that your power source supplies DC 5V before connecting it.

Key Highlights

  • Product Name: Oil Fuel PressureTransducer
  • Material: Stainless Steel & Rubber
  • Color: Silver & Black

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Product NameOil Fuel PressureTransducer
MaterialStainless Steel & Rubber
ColorSilver & Black
VoltageDC 5V
Size53mm x 14mm
Cable Length312mm
Thread1/8"-27 NPT / 1/8" NPT
Pressure5psi, 15psi, 30psi,60psi, 100psi,150psi,200psi
Quantity1pc
Input0-30 psi
Output0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 15psi outputs 2.5V, 30 psi outputs 4.5V.
Accuracywithin 2% of reading (full scale).
Thread1/8"-27 NPT.
Wiring ConnectorWater sealed quick disconnect. Mating connector is included.
WiringRed for +5V; Black for ground; Blue for signal output.
Input0-100 psi
Output0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
Accuracywithin 2% of reading (full scale).
Thread1/8"-27 NPT
Wiring ConnectorWater sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
WiringRed for +5V; Black for ground; Blue for signal output.
Input0-150 psi
Output0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V
Accuracy+/-0.5%FS
Thread1/8" NPT
WiringRed for +5V; Black for ground; Green for signal output
Overload Capacity2-4 times of rated pressure
Working Temperatur-40℃~+120℃
Compensation Temperature0℃~+80℃
Protection ClassIP67
Pressure MediumOil, gas and water which is compatible with 316L stainless steel
Load Resistance≤(supply power-6.5V/0.02A)Ω
Long-term StabilityLess than 0.1%FS/year
Temperature Effect on ZeroTypical:0.02%FS/℃; Maximum:0.05%FS/℃
Temperature Effect on SensitivityTypical: 0.02%FS/℃; Maximum: 0.05%FS/℃
Shock Resistance1000g
Anti-Shock≤+/-0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time≤1ms
Insulation Resistance>100mΩ 500VDC
Explosion-proof ClassExiaTTCT6
Electromagnetism CompatibilityEN50051-1
Input0-200 psi
Output0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, and 200 psi outputs 4.5V
Working Temperature-40~+125℃
Accuracy±1%FS
Thread1/8"-27 NPT
Overload Capacity2 times of rated pressure
Pressure MediumOil, gas and water which is compatible with 316L stainless steel
Load Resistance≤(supply power-6.5V/0.02A)Ω
Long-term Stability± 0.2%FS/year
Temperature Effect on ZeroTypical: ±0.02%FS/℃; Maximum: ±0.05%FS/℃
Temperature Effect on SensitivityTypical: ±0.02%FS/℃; Maximum: ±0.05%FS/℃
Shock Resistance100g
Anti-Shock≤±0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time≤1ms
Insulation Resistance>100mΩ 500VDC
Explosion-proof ClassExiaTTCT6
Electromagnetism CompatibilityEN50081-1; EN50082-2; IEC6 1000-4-3
Wiring ConnectorWater sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
WiringRed for IN+; Black for GND; Green for OUT.

Overview

The 1/8NPT 5V 5/15/30/60/100/150/200 PSI Pressure Transducer Sender Sensor For Oil Fuel Air Gas Stainless Steel is listed in our automobiles & motorcycles range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Product Name: Oil Fuel PressureTransducer
  • Material: Stainless Steel & Rubber (affects weight, heat handling and how the part wears)
  • Color: Silver & Black
  • Voltage: DC 5V (match this to your power supply; too high a voltage can damage the part)
  • Size: 53mm x 14mm (measure your mounting space before ordering)
  • Cable Length: 312mm (measure your mounting space before ordering)
  • Thread: 1/8"-27 NPT / 1/8" NPT
  • Pressure: 5psi, 15psi, 30psi,60psi, 100psi,150psi,200psi

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Description:
1/8NPT 5V Stainless Steel Pressure Transducer Sender Sensor Oil Fuel Air Gas
 
Specification:

Fitment:
For oil, fuel, diesel, gas, air pressure (Cannot use measuring water pressure)
Can be used in oil tank, gas tank, diesel tank etc.
 
Features:
It's an advance pressure transducer than traditional mechanical pressure transducer.
±2%FS small output error, including nonlinear, hysteresis error and repeatability, full temperature range.
It has complete surge voltage protection function.
Light weight and small size, convenient to install and operate.
 
Package Included:

 




















Product Safety Information

Quick specs

Product Name
Oil Fuel PressureTransducer
Material
Stainless Steel & Rubber
Color
Silver & Black
Voltage
DC 5V
Size
53mm x 14mm
Cable Length
312mm
See all specifications