
1 / 9 · Click to enlarge
At a glance
This tools, industrial & scientific is a good fit for DIY builders and repair work. Main specs: feature With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System): -For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage. -For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage.; safety instructions 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2.The battery cable should be as short as possible to minimize loss. 3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries). 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.; system connection 1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus..
Key Highlights
- Feature: With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System): -For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage. -For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage.
- Safety Instructions: 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2.The battery cable should be as short as possible to minimize loss. 3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries). 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
- System Connection: 1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus.
Ideal For
- Room or desk lighting
- Workbench lighting
- Outdoor use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Feature | With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System): -For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage. -For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage. |
|---|---|
| Safety Instructions | 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2.The battery cable should be as short as possible to minimize loss. 3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries). 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. |
| System Connection | 1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. |
| Package includes | 1X Solar panels Battery Charge Controller(10/20/30/40A) 1X User Manual |
What's in the box
1X Solar panels Battery Charge Controller(10/20/30/40A) 1X User Manual
Overview
The 10/20/30/40/50A 12V/24V Light &Time Control Auto Adapte Solar Charge Controller Dual USB Port LED Indicator PWM Solar Controller is listed in our tools, industrial & scientific range and suits DIY builders and repair work. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Feature: With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System): -For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage. -For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage. (note the battery type so you can order spares or the right charger)
- Safety Instructions: 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2.The battery cable should be as short as possible to minimize loss. 3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries). 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. (note the battery type so you can order spares or the right charger)
- System Connection: 1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. (note the battery type so you can order spares or the right charger)
- Package includes: 1X Solar panels Battery Charge Controller(10/20/30/40A) 1X User Manual (note the battery type so you can order spares or the right charger)
In the box
1X Solar panels Battery Charge Controller(10/20/30/40A) 1X User Manual
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.









Quick specs
- Feature
- With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System): -For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage. -For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage.
- Safety Instructions
- 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. 2.The battery cable should be as short as possible to minimize loss. 3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries). 4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
- System Connection
- 1.Connect the battery to the charge regulator - plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus.
- Package includes
- 1X Solar panels Battery Charge Controller(10/20/30/40A) 1X User Manual










