Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 12mm stainless steel push button with a yellow LED ring and self-lock action that stays on or off until pressed again. Rated 12V 2A and IP66, it is ideal for dashboards, panels and DIY enclosures.

Key Highlights

  • Self-lock action keeps ON/OFF state until pressed again
  • Yellow LED ring for clear status indication
  • 12mm mounting hole with hex nut and rubber seal
  • IP66 protection against dust and water jets
  • Silver alloy contacts and solder terminals
  • Stainless steel body with 50000-cycle mechanical life

Ideal For

  • DIY electronics hobbyists building custom control panels
  • Automotive and marine dashboard projects
  • Equipment manufacturers needing a compact illuminated switch
  • Makers designing enclosures for 12V systems
  • RC and drone ground station builders

Buying Tip

Check that your panel thickness and mounting hole are compatible with the 12mm threaded body, and confirm your circuit is 12V DC before wiring the LED ring.

Elecvora expert review

Our verdict

A well-built, compact self-lock switch with a bright LED ring and solid stainless steel construction. It is a practical choice for 12V panels where a latching action and environmental protection are needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Self-lock action simplifies on/off control
  • IP66 rating for dust and water resistance
  • Bright yellow LED ring for clear status
  • Stainless steel body and hex nut for secure mounting
  • 50,000-cycle lifespan

Cons

  • Requires soldering for connection
  • LED is fixed for 12V operation
  • Not a momentary switch, so unsuitable for horn or start buttons

Best for

12V control panels, dashboards and DIY enclosures needing a latching illuminated switch

Not ideal for

Applications requiring momentary action or higher current than 2A

Specifications

ManufacturerGeneric
Voltage Rating (V)12
Operating Voltage (VDC)12
Max. Operating Current (A)2A MAX
ColorYellow
FunctionPush to ON, Push to OFF
Switch TypeMomentary/Latching
Mounting Hole Diameter (mm)12 mm
Contact TypeSolder Type
Contact MaterialSilver Alloy
Contact Resistance (ohm)≤50 MΩ
Insulation Resistance (MOhm)≥1000
Operating Temperature (°C)-20 to 55
Operation ForceAbout 3-5N
Operation Stroke2-5mm
Body MaterialStainless Steel and Plastic
Mech. Electrical Lifecycle≈ 50000
Protection StandardIP66
Dimensions (L x W x H) mm26 x 14 (Length x Head Dia)
Weight (g)6
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 12mm 12V Ring Light Self-Lock Metal Switch – Yellow Light

Frequently Asked Questions

Is this switch momentary or latching?
It is a self-lock (non-momentary) switch. Press once to turn on, press again to turn off; it holds its position until pressed again.
What voltage does the LED ring require?
The LED ring is rated for 12V DC, matching the switch's operating voltage.
What is the maximum current rating?
The switch is rated for a maximum operating current of 2A at 12V DC.
Does it come with wires or connectors?
No, the switch has solder terminals and requires soldering your own wires. Package includes only the switch.
Is it waterproof?
It has an IP66 protection rating, meaning it is dust-tight and protected against water jets when properly installed.
What size hole do I need to mount it?
It requires a 12mm diameter mounting hole. The head diameter is 14mm and overall length is 26mm.

Overview

The Generic 12mm 12V Yellow LED Ring Self-Lock Metal Push Button Switch is a panel-mount control designed for projects that need a durable, illuminated on/off switch. Its self-lock (non-momentary) mechanism means the button holds its physical position after each press: push once to turn on, push again to turn off. The yellow LED ring provides a visible status indicator, while the stainless steel body and sealed construction give it a premium feel and resistance to environmental factors.

Key Features

  • Self-lock operation: maintains ON or OFF state without continuous pressure.
  • Yellow LED ring: integrated illumination for status feedback.
  • 12mm panel mount: threaded head with hex nut and rubber ring for secure installation.
  • IP66 protection: dust-tight and protected against water jets.
  • Silver alloy contacts: low contact resistance for reliable switching.
  • Solder terminals: simple and secure wiring connection.

Specifications Explained

Voltage and current: The switch is rated for 12V DC operation with a maximum current of 2A. This makes it suitable for low-voltage control circuits, LED lighting, small motors, relays, and electronic projects. The LED ring is designed for 12V supply, so it can typically be wired to the same circuit as the switched load.

Contact resistance and insulation: Contact resistance is specified at ≤50 MΩ (note: as given in the product data), and insulation resistance is ≥1000 MΩ, indicating good electrical separation and reliable signal integrity for low-power applications.

Mechanical life: The switch is rated for approximately 50,000 mechanical and electrical cycles, which supports long-term use in frequently operated panels.

Operating conditions: The operating temperature range of -20°C to 55°C covers typical indoor and sheltered outdoor environments. The IP66 rating means the front face is protected against dust ingress and water jets, making it suitable for wash-down areas or exposed panels when installed correctly.

Physical size: With a 12mm mounting hole, a 14mm head diameter, and a 26mm overall length, the switch fits compact control panels and enclosures. The operating force of about 3-5N and stroke of 2-5mm give a positive, tactile feel.

Compatibility and Requirements

This switch requires a 12mm diameter mounting hole and is intended for 12V DC circuits. Wiring is done by soldering to the rear terminals. The LED ring requires a 12V supply; if your circuit voltage differs, ensure the LED is powered appropriately. The switch is not supplied with a pre-wired harness or connector, so soldering tools and basic wiring supplies are needed.

Typical Uses

  • DIY electronics and Arduino projects
  • Automotive and marine dashboards
  • Control panels and equipment enclosures
  • LED lighting control
  • Home automation and hobby projects

What's in the Box

1 x 12mm 12V Ring Light Self-Lock Metal Switch – Yellow Light.

Quick specs

Manufacturer
Generic
Voltage Rating (V)
12
Operating Voltage (VDC)
12
Max. Operating Current (A)
2A MAX
Color
Yellow
Function
Push to ON, Push to OFF
See all specifications