
1 / 6 · Click to enlarge
AI Summary
A 12V DC linear actuator with a 600mm stroke that pushes or pulls up to 6000N at about 5mm/s. Its aluminium alloy body, built-in limit switch and IP52 rating make it a practical choice for automated lifting and positioning projects.
Key Highlights
- 6000N push and pull force with 6000N self-locking hold
- 600mm stroke travelling at 5mm/s under load, 7mm/s free
- 12V DC permanent magnet motor drawing about 750mA unloaded
- Aluminium alloy body with IP52 moisture and dust protection
- Built-in limit switch and quiet operation below 40dB
- 10mm mounting holes for simple pivoting bracket setups
Ideal For
- Makers building TV lift tables and motorised furniture
- Technicians automating agricultural or workshop machinery
- Solar tracking and positioning frame builders
- Medical and care furniture projects such as adjustable beds
- Automation hobbyists needing a strong slow-speed push rod
Buying Tip
Check that your mounting brackets accept 10mm pins and that your 12V supply can deliver the motor's current before ordering.
Elecvora expert review
Our verdict
A solid slow-speed actuator for projects that need high force rather than fast movement. The aluminium body, limit switch and self-locking drive make it a dependable choice for furniture, frames and light machinery automation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 6000N force with self-locking hold
- Built-in limit switch protects the mechanism
- Aluminium alloy body with IP52 protection
- Quiet operation below 40dB
Cons
- Slow 5mm/s travel means long stroke times
- Requires a separate 12V DC supply and reversing control
- Not rated for full outdoor or washdown exposure
Best for
High-force lifting, tilting and positioning projects such as TV lifts, adjustable furniture and machinery frames
Not ideal for
Applications needing fast movement or a fully weatherproof outdoor rating
Specifications
| Operating Voltage (VDC) | 12 |
|---|---|
| Stroke Length (mm) | 600 |
| Force (N) | 6000 |
| Speed (mm/s) | 5 |
| Body Material | Aluminium Alloy |
| Cable Length | 50 |
| Operating Temperature (°C) | -20 to 85 |
| Mounting Hole Diameter (mm) | 10 |
| Protection level | IP52 |
| No Load Current (mA) | 750 |
| Motor diameter (mm) | 65 |
| Self Locking Force (N) | 6000 |
| Speed at Full Load (mm/Sec) | 5 |
| Speed at No Load (mm/Sec) | 7 |
| Noise (dB) | <40 |
| Length (cm) | 80 |
| Width (cm) | 8.5 |
| Height (cm) | 15 |
| Shipping Weight | 2.8 kg |
| Shipping Dimensions | 90 × 10 × 5 cm |
What's in the box
- 1 x Linear Actuator 600mm Stroke 6000N 5mm/s 12V
Frequently Asked Questions
What power supply does this actuator need?
How do I change the direction of movement?
Does it stop automatically at the end of the stroke?
What is included with the actuator?
Can it hold a load when switched off?
How should I maintain it?
Overview
This electric push rod turns the rotary output of a 12V DC motor into linear movement along a 600mm stroke. Inside the aluminium alloy housing, a reduction gear and screw drive convert motor speed into a controlled push or pull of up to 6000N, moving at roughly 5mm/s when loaded and about 7mm/s with no load. A built-in limit switch stops the rod at the end of travel, and the screw drive holds position when power is removed thanks to a 6000N self-locking force.
Key Features
- Strong and steady: 6000N rated force with a consistent 5mm/s loaded speed.
- Self-locking drive: holds the load in place when the actuator is unpowered.
- Aluminium alloy body: rigid housing with IP52 protection against dust and light moisture.
- Quiet running: noise stays below 40dB during operation.
- Built-in limit switch: end-of-stroke cut-off protects the mechanism.
- Wide temperature range: rated for -20 to 85C environments.
Specifications Explained
Stroke length is the distance the rod travels, here 600mm, so plan mounting space for the retracted body plus the full extension. Force of 6000N describes the maximum push or pull the unit is rated for; staying below this limit protects the gearing. Speed is deliberately modest at 5mm/s loaded, trading pace for torque, so a full stroke takes around two minutes. The 12V DC motor draws about 750mA with no load, and the 65mm motor diameter and 50cm cable suit compact installations. Mounting holes measure 10mm, matching common pivot pins and brackets.
Compatibility and Requirements
The actuator requires a 12V DC supply capable of handling the motor's current draw; it is not designed for AC power. Wiring is via the supplied 50cm cable, and direction changes by reversing polarity. Confirm your brackets accept 10mm mounting pins and that your structure can carry the rated force.
Typical Uses
Common applications include TV lift tables, electric sofas and recliners, adjustable beds and medical chairs, solar tracking frames, agricultural machinery, roof and window automation, and camera or frame positioning.
What's in the Box
- 1 x 12V linear actuator, 600mm stroke, 6000N, 5mm/s
Quick specs
- Operating Voltage (VDC)
- 12
- Stroke Length (mm)
- 600
- Force (N)
- 6000
- Speed (mm/s)
- 5
- Body Material
- Aluminium Alloy
- Cable Length
- 50













