Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A two-pack of 15A 250V AC SPST ON-OFF rocker switches with a dust-proof casing and screw-free panel mounting. Marked I/O positions and solderable rear pins make power control simple.

Key Highlights

  • 15A at 250V AC rating for general-purpose power switching
  • SPST ON-OFF action with clearly marked I and O positions
  • Dust-proof casing protects the internal switching mechanism
  • Clips into a panel cutout without screws or nuts
  • Two rear pins for soldered wire connections
  • Rated for 50,000 to 100,000 switching cycles

Ideal For

  • Makers building robot and DC motor power circuits
  • Vehicle and motorcycle owners adding accessory switches
  • Technicians wiring equipment and dispenser panels
  • Hobbyists controlling power in workshop enclosures
  • Boat owners needing simple panel-mounted ON-OFF control

Buying Tip

Measure your panel cutout and confirm your circuit stays within 15A at 250V AC before ordering, since this is a clip-in SPST switch with no mounting hardware.

Elecvora expert review

Our verdict

A no-frills, high-rating rocker switch that does one job well: reliable ON-OFF control with clip-in fitting and a dust-proof cover. The two-piece pack suits spares or multi-switch panels.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 15A 250V AC rating covers many general-purpose loads
  • Dust-proof casing adds protection in dusty settings
  • Screw-free clip mounting speeds up installation
  • Clear I and O markings reduce wiring mistakes

Cons

  • Requires soldering to the rear pins
  • SPST design switches only one conductor
  • No mounting hardware or wiring included

Best for

General-purpose ON-OFF power control in panels, vehicles and hobby builds

Not ideal for

Applications needing multi-pole switching or screw-terminal wiring

Specifications

ManufacturerGeneric
Model No. / NameRocker Switch
Current Rating (A)15
Default Operating ModeON-OFF
Product TypeSPST Switch
Mounting TypePanel Mount
Operating Temperature (°C)-20 to 85 °C
Life Cycle50000-100000 Cycles
Weight (g)6(each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 2 x 15A 250V AC SPST ON-OFF dust-proof rocker switches

Frequently Asked Questions

What does SPST mean on this switch?
SPST stands for single-pole single-throw, meaning the switch opens or closes one circuit path in a simple ON-OFF action.
How much current can the switch handle?
It is rated at 15A at 250V AC. Keep your circuit's current and voltage within this rating.
Do I need screws to mount it?
No. Tabs on the top and bottom clip the switch into a panel cutout, so no screws or nuts are required.
How do I connect wires to the switch?
Solder your wires to the two large pins on the back of the switch, then insulate the connections.
How many switches are included?
The package contains two 15A 250V AC SPST ON-OFF dust-proof rocker switches.
What is the operating temperature range?
The switch is rated to operate between -20 and 85 °C.

Overview

This set contains two Generic 15A 250V AC SPST ON-OFF rocker switches, each supplied with a dust-proof protective casing. The switch is a single-pole single-throw design, meaning it opens or closes one circuit path and stays in the position you select until you press the rocker again. The I and O markings on the rocker make the current state easy to read at a glance, which is helpful on busy panels or in low-light installations.

Each switch weighs about 6 g and mounts through a panel cutout using tabs on the top and bottom. No screws or nuts are required, so fitting is quick and the front face stays clean. Two large pins on the back accept soldered wires, making the switch suitable for hobby electronics, vehicle wiring and equipment control where a reliable mechanical ON-OFF action is preferred.

Key Features

  • SPST ON-OFF switching: a simple two-position action that stays where it is set.
  • 15A 250V AC rating: a high load rating for general-purpose power control.
  • Dust-proof casing: helps shield the switching mechanism from dust and debris.
  • Screw-free mounting: top and bottom tabs secure the switch in a panel cutout.
  • Marked positions: I and O symbols identify on and off clearly.
  • Long service life: rated for 50,000 to 100,000 cycles.

Specifications Explained

The 15A current rating at 250V AC indicates the switch is intended for circuits drawing up to that current at that voltage. Always confirm your circuit's current and voltage fall within this rating before wiring. SPST means the switch controls a single conductor; it does not switch a neutral and live line together, so plan your wiring accordingly.

The operating temperature range of -20 to 85 °C covers typical indoor, workshop and vehicle environments. The 50,000 to 100,000 cycle life figure describes expected mechanical switching endurance under normal use. Each switch weighs roughly 6 g, so it adds negligible weight to a panel or enclosure.

Compatibility and Requirements

The switch requires a panel cutout sized to accept the clip-in body and a soldering iron to attach wires to the two rear pins. It is a two-pin, two-position device, so only ON-OFF control is possible. No mounting hardware is supplied or needed. Check that your circuit's voltage and current do not exceed the 15A 250V AC rating.

Typical Uses

Common applications include power control for electronic circuits, robots, DC motors, industrial machines, water dispensers, cars, motorcycles and boats. The dust-proof casing and clip-in mounting make it a practical choice for equipment panels and enclosures that see regular handling.

What's in the Box

  • 2 x 15A 250V AC SPST ON-OFF dust-proof rocker switches

Quick specs

Manufacturer
Generic
Model No. / Name
Rocker Switch
Current Rating (A)
15
Default Operating Mode
ON-OFF
Product Type
SPST Switch
Mounting Type
Panel Mount
See all specifications