Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This lora module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name RFM Series; operating frequency (mhz) 433; power supply voltage (v) 3.7V 14500 Lipo battery . Check that your power source supplies 3.7V 14500 Lipo battery before connecting it.

Key Highlights

  • Model No. / Name: RFM Series
  • Operating Frequency (MHz): 433
  • Power Supply Voltage (V): 3.7V 14500 Lipo battery 

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameRFM Series
Operating Frequency (MHz)433
Power Supply Voltage (V)3.7V 14500 Lipo battery 
Operating Frequency (Hz)433 Mhz
Regulator3.3V
Analog InputA0 A1
PWM PinsD3
Shipping Weight0.05 kg
Shipping Dimensions8 × 6 × 3 cm

Overview

The 2.4G RFM98 LoRa Radio Node v1.0 Based on S x1278-(433 Mhz) is listed in our lora module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: RFM Series
  • Operating Frequency (MHz): 433 (make sure the rest of your system works at this frequency)
  • Power Supply Voltage (V): 3.7V 14500 Lipo battery  (note the battery type so you can order spares or the right charger)
  • Operating Frequency (Hz): 433 Mhz (make sure the rest of your system works at this frequency)
  • Regulator: 3.3V
  • Analog Input: A0 A1
  • PWM Pins: D3
  • Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This LoRa Radio Node v1.0 is based on the ATmega328P and RFM95  433 Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, and uses the Arduino pro mini 8Mhz 3.3V bootloader, which can be used like an Arduino pro mini. This chip has 32K of flash and 2K of RAM.
On board with a 3.7Vdc 14500 battery holder, it can be used anywhere you like. In this LoRa Radio Node, we break out 2 i2c ports, 2 analog ports (A0 A1), and 2 digital ports (D3 D4) with 4-pin and 3-pin shell kk type connectors.
These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee).

Features:

  1. Power supply: 3.7V 14500 Lipo battery
  2. Operating Frequency: 433 Mhz
  3. ATmega328P 8MHz with 3.3V logic/power
  4. 3.3V regulator with 500mA peak current output
  5. Hardware Serial, hardware I2C, hardware SPI support
  6. 1 x PWM pins: D3
  7. 2 x analog inputs: A0 A1
  8. Pin #13 BLUE LED for general-purpose blinking
  9. 2 mounting holes
  10. Size: 40mm x 60mm
  11. Reset button

Package Includes: 1 x LoRa + ATmega328P Board with 14500 Battery Holder 1 x LoRa 433 MHz Antenna

Quick specs

Model No. / Name
RFM Series
Operating Frequency (MHz)
433
Power Supply Voltage (V)
3.7V 14500 Lipo battery 
Operating Frequency (Hz)
433 Mhz
Regulator
3.3V
Analog Input
A0 A1
See all specifications