Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The RFM98 LoRa Radio Node v1.0 pairs an ATmega328P microcontroller with a 915 MHz SX1278 radio for long-range data projects. It includes a 14500 battery holder and antenna, ready for portable sensor or telemetry use.

Key Highlights

  • 915 MHz SX1278 LoRa radio for long-range data transmission
  • ATmega328P at 8 MHz with 3.3V logic and Arduino Pro Mini bootloader
  • 32K flash and 2K RAM for user sketches
  • On-board 3.7V 14500 LiPo battery holder for portable power
  • Breaks out I2C, analog A0/A1, and digital D3/D4 ports
  • Includes 915 MHz antenna and blue LED on pin 13

Ideal For

  • Makers building long-range sensor networks
  • IoT developers prototyping LoRa telemetry
  • Students learning embedded radio communication
  • Outdoor enthusiasts creating remote monitoring nodes
  • Electronics hobbyists needing portable data links

Buying Tip

Remember to order a 3.7V 14500 LiPo battery separately if you plan to use the on-board holder, and always connect the antenna before powering the radio.

Elecvora expert review

Our verdict

The RFM98 LoRa Radio Node v1.0 is a practical, integrated solution for long-range data projects, combining a familiar microcontroller with a capable LoRa radio. It is well-suited for hobbyists and prototypers who want to avoid wiring separate modules.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated ATmega328P and SX1278 radio
  • On-board battery holder for portability
  • Arduino Pro Mini compatible bootloader
  • Breakout connectors for sensors
  • Compact size with mounting holes

Cons

  • No USB interface; requires external programmer
  • Battery not included
  • Limited to small data packets, not audio or video

Best for

Long-range sensor and telemetry projects

Not ideal for

Streaming audio or video

Specifications

Model No. / NameRFM Series
Operating Frequency (MHz)915
Operating Frequency (Hz)915 MHz
Power Supply Voltage (V)3.7V 14500 Lipo battery 
Regulator3.3V
Shipping Weight0.05 kg
Shipping Dimensions8 × 6 × 3 cm

What's in the box

  • 1 x LoRa + ATmega328P Board with 14500 Battery Holder
  • 1 x LoRa 915 MHz Antenna

Frequently Asked Questions

Can I program this board with the Arduino IDE?
Yes, it uses the Arduino Pro Mini 8MHz 3.3V bootloader, so you can select that board type in the Arduino IDE. You will need an external FTDI adapter or programmer to upload sketches.
What battery does it use?
The on-board holder accepts a 3.7V 14500 LiPo battery, which is not included. Ensure correct polarity when inserting the battery.
Does it come with an antenna?
Yes, a 915 MHz antenna is included in the package. Always connect the antenna before transmitting.
What is the operating frequency?
The radio operates at 915 MHz, which is part of the license-free ISM band in some regions. Check your local regulations before use.
Can I use this for video transmission?
No, this radio is designed for small data packets and is not suitable for audio or video streaming.
What connectors are available for sensors?
The board provides two I2C ports, two analog inputs (A0, A1), and two digital ports (D3, D4) via 4-pin and 3-pin KK-type connectors.

Overview

The RFM98 LoRa Radio Node v1.0 is a ready-to-use development board that merges an ATmega328P microcontroller with a 915 MHz SX1278 LoRa transceiver. The ATmega328P operates at 8 MHz and 3.3V logic, and it comes preloaded with the Arduino Pro Mini 8MHz 3.3V bootloader, so you can treat it like an Arduino Pro Mini when writing and uploading sketches. With 32K of flash and 2K of RAM, there is enough room for typical sensor and communication tasks. The board also features an on-board holder for a 3.7V 14500 LiPo battery, which makes it convenient for field deployments where mains power is not available.

Key Features

  • 915 MHz LoRa radio: Based on the SX1278 module, it provides long-range, low-power data transmission suitable for small packets.
  • ATmega328P microcontroller: Runs at 8 MHz with 3.3V logic and uses the Arduino Pro Mini 8MHz 3.3V bootloader for familiar programming.
  • Memory: 32K of flash and 2K of RAM for your code and data.
  • Battery holder: Integrated 3.7V 14500 LiPo battery holder for portable operation.
  • Connector breakouts: Two I2C ports, two analog inputs (A0, A1), and two digital ports (D3, D4) are exposed via 4-pin and 3-pin KK-type connectors.
  • Status LED: A blue LED on pin 13 for general-purpose blinking or debugging.
  • Compact size: 40 mm x 60 mm with two mounting holes and a reset button.

Specifications Explained

The 915 MHz operating frequency is part of the license-free ISM band in many regions, but always check your local regulations before transmitting. The SX1278 radio is designed for small data packets, not for audio or video streaming. The 3.3V regulator provides up to 500 mA peak current, which is sufficient for the board and typical low-power sensors. The ATmega328P’s 8 MHz clock and 3.3V logic ensure compatibility with 3.3V peripherals. The 32K flash and 2K RAM are adequate for most Arduino sketches, though large libraries may consume a significant portion. The 14500 battery holder accepts a 3.7V LiPo cell (battery not included), and the board’s compact 40 x 60 mm footprint makes it easy to fit into small enclosures.

Compatibility and Requirements

Because the board uses the Arduino Pro Mini 8MHz 3.3V bootloader, it can be programmed with the Arduino IDE by selecting the corresponding board type. You will need a suitable FTDI adapter or programmer to upload sketches, as no USB interface is on board. The KK-type connectors are compatible with matching KK plugs, which are common in hobby electronics. A 3.7V 14500 LiPo battery is required for portable use. The included 915 MHz antenna must be connected before transmitting to avoid damage to the radio module.

Typical Uses

This node is well suited for long-range sensor networks, remote telemetry, environmental monitoring, and any project that needs to send small data packets over distances greater than Wi-Fi or Bluetooth can reliably cover. It is also useful for prototyping LoRa-based IoT devices, battery-powered field nodes, and custom remote controls.

What's in the Box

  • 1 x LoRa + ATmega328P Board with 14500 Battery Holder
  • 1 x LoRa 915 MHz Antenna

Quick specs

Model No. / Name
RFM Series
Operating Frequency (MHz)
915
Operating Frequency (Hz)
915 MHz
Power Supply Voltage (V)
3.7V 14500 Lipo battery 
Regulator
3.3V
Shipping Weight
0.05 kg
See all specifications