Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2.54mm 2x20 female double row header strip with 40 through-hole sockets for compact PCB connections. Phosphor bronze contacts and PBT UL 94V-0 insulation make it a dependable choice for prototypes and repairs.

Key Highlights

  • 2.54mm pitch with two rows of 20 female sockets
  • Through-hole mounting for secure PCB installation
  • Phosphor bronze contacts with 20mΩ contact resistance
  • PBT UL 94V-0 insulation material
  • Insulation resistance of at least 1000MΩ
  • Compact 51mm by 5mm strip weighs about 3g

Ideal For

  • Electronics hobbyists building prototypes on perfboard
  • Repair technicians replacing damaged female headers
  • Makers creating removable board-to-board connections
  • Engineering students learning through-hole soldering
  • Small-batch assembly of control and signal boards

Buying Tip

Check that your PCB footprint has two rows of 20 holes at 2.54mm spacing before ordering, as this strip will not fit a different pitch or pin count.

Elecvora expert review

Our verdict

A straightforward, well-specified female header strip that covers the essentials for through-hole PCB work. The phosphor bronze contacts and flame-retardant PBT body make it a sensible choice for prototypes and repairs where a removable 40-way connection is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 2.54mm pitch fits common prototyping boards
  • Double row layout saves board space
  • Phosphor bronze contacts for reliable conductivity
  • PBT UL 94V-0 insulation material

Cons

  • Requires soldering for installation
  • Mating male headers or pins are not included

Best for

Prototyping and repair work needing a 40-position female header

Not ideal for

Applications requiring a different pitch or pin count

Specifications

ManufacturerGeneric
Pitch Spacing (mm)2.54
Connector TypeHeader Strip
GenderFemale
Mounting TypeThrough Hole
Pin Spacing (mm)2.54
Contact MaterialPhosphor Bronze
Contact Resistance (ohm)20mΩ
Insulation MaterialPBT UL 94V-0
Insulation Resistance (MOhm)≥1000
Length (mm)51
Width (mm)5
Weight (g)3 (each)
No. of Rows2
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 2.54mm 2x20 Pin Female Double Row Header Strip

Frequently Asked Questions

What is the pin count of this header strip?
It has two rows of 20 sockets, giving 40 positions in total.
Does it require soldering?
Yes, it is designed for through-hole mounting and must be soldered to a PCB for a secure connection.
What does it mate with?
It accepts 2.54mm pitch male headers or pins. No mating parts are included with the strip.
What are the contact and insulation materials?
The contacts are phosphor bronze and the insulation is PBT with a UL 94V-0 rating.
What is included in the package?
One 2.54mm 2x20 pin female double row header strip is included.
How should I care for the strip?
Store it in a dry place and avoid bending the pins or inserting oversized pins, which can damage the contacts.

Overview

This female double row header strip provides 40 socket positions on a standard 2.54mm pitch, arranged as two rows of 20. It is designed for through-hole mounting, so the pins pass through your PCB and can be soldered on the underside for a stable mechanical and electrical joint. The strip is 51mm long and 5mm wide, making it a space-efficient option for boards where room is limited. Each strip weighs approximately 3g, so it adds very little weight to an assembly.

Key Features

  • Double row layout: two rows of 20 female sockets give 40 connection points in a single strip.
  • Standard pitch: 2.54mm spacing matches common prototyping boards and headers.
  • Through-hole mounting: suitable for soldering into plated through-holes on a PCB.
  • Phosphor bronze contacts: a conductive alloy used for reliable signal transfer.
  • PBT UL 94V-0 insulation: a flame-retardant plastic body for the socket housing.

Specifications Explained

Pitch spacing (2.54mm): the distance between the centres of adjacent sockets. This is the most common spacing for breadboards, perfboards, and many development boards, so the strip fits standard 0.1-inch grids.

Contact resistance (20mΩ): a low resistance value that helps keep voltage drop small across the connection, which is useful for low-power signals and modest currents.

Insulation resistance (≥1000MΩ): indicates very low leakage between separate contacts, supporting clean signal paths in sensitive circuits.

Contact material (phosphor bronze): a springy copper alloy that holds its shape and provides dependable contact pressure over repeated insertions.

Insulation material (PBT UL 94V-0): a durable thermoplastic with a recognised flame-retardant rating, suitable for enclosed electronic assemblies.

Compatibility and Requirements

This header strip is intended for through-hole PCB mounting and requires soldering to secure it to a board. It mates with 2.54mm pitch male headers or pins, but no specific mating parts are included. The 2.54mm pitch and 2x20 layout mean it will align with standard 0.1-inch prototyping grids. No tools or accessories are supplied, so you will need your own soldering equipment and a suitable PCB footprint with two rows of 20 holes at 2.54mm spacing.

Typical Uses

Use this strip for board-to-board connections, wire-to-board links, and removable jumper arrangements in prototypes and repaired equipment. It is also handy for adding a socketed interface to a development board or for replacing a damaged female header on an existing PCB. Because it is a passive connector, it does not require power and can be used in signal, data, and low-power circuits within the limits of its materials.

What's in the Box

One 2.54mm 2x20 pin female double row header strip is included.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
2.54
Connector Type
Header Strip
Gender
Female
Mounting Type
Through Hole
Pin Spacing (mm)
2.54
See all specifications