Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2.54mm pitch female header strip with two rows of 20 through-hole receptacles and 12mm long pins. It gives you 40 socket positions for mating modules, cables or boards to a PCB at a raised height.

Key Highlights

  • Two rows of 20 female receptacles on a standard 2.54mm pitch
  • 12mm pin length for taller through-hole mating heights
  • Phosphor bronze contacts with 20mΩ contact resistance
  • PBT insulator rated UL 94V-0 for the housing
  • 51mm long, 5mm wide and about 6g in weight
  • Straight double row body for vertical PCB mounting

Ideal For

  • Makers building perfboard and prototyping projects
  • Electronics repair technicians replacing socket rows
  • Hobbyists creating development board breakout adapters
  • Students learning through-hole soldering
  • Designers of custom control and interface boards

Buying Tip

Check that your PCB uses a 2.54mm hole grid and confirm the 12mm pin length gives the clearance you need before soldering.

Elecvora expert review

Our verdict

A straightforward double row female header that covers the common 2.54mm prototyping grid with longer 12mm pins for extra reach. It is a practical part to keep on hand for builds that need 40 socket positions in a compact strip.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 2.54mm pitch suits common prototyping boards
  • 40 positions in a compact double row layout
  • 12mm pins give useful through-hole reach
  • Phosphor bronze contacts and UL 94V-0 PBT housing

Cons

  • Requires soldering and a matching PCB footprint
  • No mating male header or cable included
  • Only one strip is supplied per pack

Best for

Prototyping, repair and custom PCB builds needing a 2 x 20 female socket row

Not ideal for

Projects that need a pre-assembled cable or a different pitch

Specifications

ManufacturerGeneric
Pitch Spacing (mm)2.54
Connector TypeHeader Strip
GenderFemale
Mounting TypeThrough Hole
Pin Length (mm)12
Pin Spacing (mm)2.54
Contact MaterialPhosphor Bronze
Contact Resistance (ohm)20mΩ
Insulation MaterialPBT UL 94V-0
Insulation Resistance (MOhm)≥1000
Length (mm)51
Width (mm)5
Weight (g)6
No. of Rows2
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 2.54MM 2x20 Pin Female Double Row Straight Long Header Strip

Frequently Asked Questions

What is this header strip used for?
It provides two rows of 20 female receptacles for through-hole mounting on a PCB, so modules, male headers or cable connectors can be plugged in vertically.
Does it fit standard breadboards and perfboard?
It uses a 2.54mm pitch and 2.54mm pin spacing, which matches the common 0.1-inch prototyping grid. Check your board's hole layout before soldering.
How long are the pins?
The pins are 12mm long, which gives more reach through the PCB than a short header and can provide a taller mating height.
What materials are used?
The contacts are phosphor bronze and the insulator is PBT rated UL 94V-0, with a contact resistance of 20mΩ and insulation resistance of at least 1000MΩ.
What is included in the package?
One 2.54mm 2x20 pin female double row straight long header strip is included. Mating headers and cables are not supplied.
How should I care for it?
Store it in a dry parts drawer, avoid bending the pins, and use reasonable soldering heat so the PBT housing is not deformed.

Overview

This is a straight, double row female header strip built around a 2.54mm pitch. It provides two rows of 20 receptacles, giving 40 socket positions in a single 51mm long, 5mm wide body. The pins are 12mm long and designed for through-hole mounting, so the part sits vertically on a PCB and accepts a mating male header, module or cable connector from above.

Because the pins extend further than a standard short header, this strip is useful when you need extra clearance or a raised mating height between a board and whatever plugs into it. The contacts are phosphor bronze and the insulator is PBT rated UL 94V-0.

Key Features

  • Double row female header with 2 x 20 positions
  • 2.54mm pitch and 2.54mm pin spacing for standard prototyping grids
  • 12mm pin length for through-hole mounting with extra reach
  • Phosphor bronze contacts with 20mΩ contact resistance
  • PBT UL 94V-0 insulator material
  • Insulation resistance of at least 1000MΩ
  • Compact 51mm x 5mm body weighing about 6g

Specifications Explained

Pitch and pin spacing (2.54mm): This is the common 0.1-inch grid used across breadboards, perfboard and many development boards, so the strip lines up with standard prototyping layouts.

Gender and rows: Female contacts accept male pins, and the double row format gives 40 positions in a compact footprint. This is helpful when a project needs a dense but still hand-solderable connection block.

Pin length (12mm): The longer pins pass through the PCB and leave more material on the solder side, which can help when working with thicker boards or when a taller mating height is required.

Contact and insulation materials: Phosphor bronze is used for the contacts, with a contact resistance of 20mΩ. The PBT housing is rated UL 94V-0, and the insulation resistance is at least 1000MΩ.

Compatibility and Requirements

The strip is intended for through-hole PCB mounting and mates with male headers and connectors on the same 2.54mm pitch. It requires a PCB with matching 2.54mm hole spacing and soldering to fix it in place. No cable, mating header or other accessory is supplied, so plan the mating part separately.

Typical Uses

  • Prototyping boards and perfboard projects
  • Development board breakout adapters
  • Repair and replacement of socket rows on existing PCBs
  • Ribbon cable and module connection points
  • Custom control boards and small electronic assemblies

What's in the Box

One 2.54mm 2x20 pin female double row straight long header strip.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
2.54
Connector Type
Header Strip
Gender
Female
Mounting Type
Through Hole
Pin Length (mm)
12
See all specifications