Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2x40 female header strip on a 2.54mm pitch with right-angle through-hole pins, giving 80 receptacle positions in two rows. The long strip can be broken down to the exact pin count your PCB or prototype needs.

Key Highlights

  • Double-row 2x40 layout gives 80 female contact positions
  • Standard 2.54mm pitch matches common prototyping grid spacing
  • Right-angle bend suits edge-mounted and low-profile board layouts
  • Phosphor bronze contacts with 20mΩ contact resistance
  • PBT UL 94V-0 insulator body for soldered PCB use
  • Strip can be broken to the required pin count

Ideal For

  • Hobbyists building custom PCBs and prototype boards
  • Repair technicians replacing failed header rows
  • Design engineers needing a break-to-length receptacle strip
  • Makers working on 2.54mm through-hole layouts
  • Students assembling soldered electronics projects

Buying Tip

Order more than one strip if you plan to cut it down, since each cut section cannot be rejoined and offcuts are wasted.

Elecvora expert review

Our verdict

A straightforward, inexpensive strip that does exactly what a 2.54mm female right-angle header should. Its main value is the 2x40 length, which lets you cut the exact size you need instead of buying pre-sized parts.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 2.54mm pitch fits common prototyping grids
  • 80 positions on one strip, cuttable to size
  • Right-angle form suits edge and low-profile layouts
  • Phosphor bronze contacts and flame-retardant PBT body

Cons

  • Requires soldering; not a plug-and-play connector
  • Cutting the strip wastes offcuts and needs care between contacts
  • Right-angle orientation is fixed and cannot be changed

Best for

Cut-to-length female header rows on custom PCBs and prototypes

Not ideal for

Screw-terminal or crimp-style wiring without soldering

Specifications

ManufacturerGeneric
Pitch Spacing (mm)2.54
Connector TypeHeader Strip
GenderFemale
Mounting TypeThrough Hole
Pin Spacing (mm)2.54
Contact MaterialPhosphor Bronze
Contact Resistance (ohm)20mΩ
Insulation MaterialPBT UL 94V-0
Insulation Resistance (MOhm)≥1000
Length (mm)103
Width (mm)5
Weight (g)1 (approx) (each)
No. of Rows2
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

Can I break this strip into smaller pieces?
Yes. The strip is supplied as 2 rows of 40 and can be cut down to the number of positions your board needs. Cut between contacts and trim any protruding tails at the cut end.
What does right angle mean here?
The pins exit at 90 degrees to the insulator body instead of straight out. This lets the connector sit low against a board edge or under an overhanging part.
Will it fit standard prototyping boards?
It uses a 2.54mm pitch on both rows, which matches the common through-hole prototyping grid. Check that your board has holes on that spacing and room for the angled body.
What is included with the purchase?
The package contents are not specified in the supplied product data, so confirm the quantity with the listing before ordering.
Does it need soldering?
Yes. It is a through-hole part, so the pins are soldered into the board. It is not a push-fit or crimp connector.
How should I store spare strips?
Keep them in a dry place away from moisture and mechanical stress, and avoid bending the right-angle pins, which can loosen them in the insulator.

Overview

This Generic 2x40 Berg strip is a female header row with 80 receptacles split across two rows of 40. Each pin sits on a 2.54mm pitch, the spacing that dominates through-hole prototyping, so the strip lines up with standard board grids and mating pin headers. The pins exit at 90 degrees to the insulator body, making this a right-angle part rather than a straight vertical header.

It is a through-hole component: the pins pass through plated holes and are soldered on the underside of the board. The insulator is moulded from PBT rated UL 94V-0, and the contacts are phosphor bronze. Because the strip is supplied at full length, it can be cut down to whatever number of positions a particular board or cable run requires.

Key Features

  • 2x40 female layout: 80 receptacle positions in two rows, ready to be split as needed.
  • 2.54mm pitch: matches the common through-hole prototyping grid.
  • Right-angle mounting: the bent pin orientation keeps the connector low against the board edge.
  • Phosphor bronze contacts: a spring-grade alloy used for repeated mating cycles.
  • PBT UL 94V-0 insulator: a flame-retardant thermoplastic body suited to soldered assemblies.
  • Compact footprint: 103mm long and 5mm wide, with each strip weighing roughly 1g.

Specifications Explained

Pitch and pin spacing are both 2.54mm, which is the critical number here. It determines whether the strip will mate with a given male header and whether the pins land on the holes of a standard prototyping board.

Contact resistance of 20mΩ describes the resistance introduced at the contact interface. Lower values mean less loss across the connection, which matters when a signal or supply rail passes through the header.

Insulation resistance of at least 1000MΩ indicates how well the PBT body isolates adjacent contacts from one another. Combined with the UL 94V-0 rating, it tells you the part is intended for ordinary low-voltage board work.

Gender and type matter when ordering: this is a female header strip, so it accepts male pins rather than inserting into a socket. The right-angle bend is fixed at manufacture and cannot be straightened.

Compatibility and Requirements

The strip requires a PCB or perfboard with 2.54mm-spaced holes and enough clearance for a right-angle body. It is a solder-in part, so a soldering iron and suitable solder are needed; it is not a crimp or push-fit connector. Mating hardware must be male 2.54mm headers. No cable, housing or mounting screws are supplied.

Typical Uses

  • Custom PCB builds where a receptacle row is needed at the board edge.
  • Prototyping and breadboard-style layouts on 2.54mm spacing.
  • General custom header assemblies cut to a specific pin count.
  • Repair or rework where an existing female header row is being replaced.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
2.54
Connector Type
Header Strip
Gender
Female
Mounting Type
Through Hole
Pin Spacing (mm)
2.54
See all specifications