
1 / 4 · Click to enlarge
AI Summary
A 220V ultrasonic cleaning generator circuit board delivering 100W output at 28KHz for powering transducers in cleaning systems. Its compact 123 x 74 mm board format makes it easy to fit into a control panel or equipment housing.
Key Highlights
- 100W output power for ultrasonic cleaning transducers
- 220V input voltage for direct mains-powered builds
- 28KHz fixed operating frequency
- Compact board measuring 123 mm by 74 mm
- Suits integration into cleaning system enclosures
- Lightweight module at roughly 0.262 kg shipping weight
Ideal For
- Technicians repairing ultrasonic cleaning equipment
- Makers building small ultrasonic cleaning tanks
- Workshops maintaining 28KHz cleaning systems
- Electronics builders integrating generator boards into enclosures
- Service teams replacing a failed cleaning generator board
Buying Tip
Confirm your transducers and supply are rated for 28KHz and 220V before ordering, since this board is a fixed-frequency, fixed-input module.
Elecvora expert review
Our verdict
A practical component for anyone maintaining or building a 28KHz ultrasonic cleaning system, provided the 220V input and 100W output suit the existing hardware. It is a board-level part, so the quality of the final result depends heavily on correct installation and matching transducers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 220V, 28KHz and 100W ratings simplify matching
- Compact 123 x 74 mm board fits tighter enclosures
- Straightforward generator module for repair and build projects
- Lightweight part that is easy to store and ship
Cons
- Not a complete cleaning unit; enclosure and transducers are not included
- Fixed 220V input and 28KHz frequency limit it to matching systems
- Installation requires electronics experience and safe mains handling
Best for
Repair technicians and builders working with 28KHz, 220V ultrasonic cleaning equipment
Not ideal for
Users wanting a ready-to-use ultrasonic cleaner out of the box
Specifications
| Output Power (W) | 100 |
|---|---|
| Input Voltage (V) | 220 |
| Operating Frequency (Hz) | 28KHz |
| Length (mm) | 123 |
| Width (mm) | 74 |
| Shipping Weight | 0.262 kg |
| Shipping Dimensions | 15 × 10 × 4 cm |
What's in the box
- 1 x 220V 28KHz 100W Ultrasonic Cleaning Circuit Board Generator Parts
Frequently Asked Questions
Is this a complete ultrasonic cleaner?
What input voltage does it need?
What frequency does it operate at?
How much power does it output?
What are the board dimensions?
What is included with the product?
Overview
This ultrasonic cleaning circuit board is a generator module designed to drive transducers inside ultrasonic cleaning systems. It accepts a 220V input and produces 100W of output at an operating frequency of 28KHz. Rather than a finished cleaner, it is a component for people building, servicing or upgrading cleaning equipment who need a driver board that matches their existing transducer setup.
The board measures 123 mm in length and 74 mm in width, giving it a relatively compact footprint for fitting into a housing, panel or equipment chassis. It is supplied as a single circuit board part, so installation planning and enclosure design remain with the builder.
Key Features
- 100W output power: sized for ultrasonic cleaning loads in small to medium systems.
- 220V input: designed for mains-powered equipment builds using that supply voltage.
- 28KHz operating frequency: matches transducers rated for the same frequency.
- Compact dimensions: 123 mm by 74 mm board format for tighter installations.
- Component-level part: intended for integration rather than standalone use.
Specifications Explained
Output power
The 100W rating describes the output the generator provides to the ultrasonic load. Matching this to the transducer or transducer set in your tank is the main selection point, since the board is intended to drive a cleaning load of that scale.
Input voltage
The input is 220V. This is a key requirement: the board is built for a 220V supply, so the surrounding equipment and wiring must provide that input. It is not a universal-input module.
Operating frequency
At 28KHz, the generator operates at a fixed frequency. Transducers and tank assemblies used with it should be specified for the same 28KHz operating frequency so the system works as a matched set.
Board size
At 123 mm by 74 mm, the board leaves room for wiring and mounting inside a control enclosure. Plan clearances and airflow around the board as part of your build.
Compatibility and Requirements
This module requires a 220V input supply and is intended for ultrasonic cleaning systems built around a 28KHz operating frequency and a 100W output level. It is a circuit board generator part, not a complete cleaner, so a suitable enclosure, wiring, transducer assembly and cleaning tank are supplied by the builder. Confirm that your transducers and power supply match these ratings before installation.
Typical Uses
- Building or repairing small ultrasonic cleaning tanks
- Servicing existing 28KHz cleaning equipment
- Bench and workshop cleaning setups
- Integrating a generator board into a control panel or chassis
What's in the Box
1 x 220V 28KHz 100W Ultrasonic Cleaning Circuit Board Generator Parts.
Quick specs
- Output Power (W)
- 100
- Input Voltage (V)
- 220
- Operating Frequency (Hz)
- 28KHz
- Length (mm)
- 123
- Width (mm)
- 74
- Shipping Weight
- 0.262 kg













