Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
24Pin to SATA Dual Power Start Up Adapter Card — image 1
Hover to zoom

1 / 3 · Click to enlarge

24Pin to SATA Dual Power Start Up Adapter Card

5.01 rating
528+ bought in past month
AI Summary
USB Interface Module for everyday users

The 24Pin to SATA Dual Power Start Up Adapter Card is a value-for-money usb interface module designed for everyday users. It features Interface: Big 4PIN interface and Supported systems: Fully compatible.

₹709
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹709
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Interface: Big 4PIN interface
Supported systems: Fully compatible
Material: Environmentally friendly PCB material
Shipping Weight: 0.023 kg
Shipping Dimensions: 12 × 8 × 1 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1150669Category: USB Interface Module

About This Product

The 24Pin to SATA Dual Power Start Up Adapter Card is a value-for-money usb interface module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Interface: Big 4PIN interface — compatible with modern devices
  • Supported systems: Fully compatible — compatible with modern devices
  • Material: Environmentally friendly PCB material — built to last with a quality finish
  • Shipping Weight: 0.023 kg
  • Shipping Dimensions: 12 × 8 × 1 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This ATX 24PIN Dual PSU Power Synchronous Start Extender Cable Card adapter is perfect for connecting two power supplies in a Mining Rig. Just plug one of your SATA  cables from your main PSU into the SATA slot on the PCB. Then plug the 24pin cable from the secondary PSU into the 24pin slot on the PCB and there you have it!

Features: 

  1. It provides a stable power supply, realizes that the auxiliary power supply and the main power supply are turned on and off at the same time, protecting the power supply and the life of the graphics card.
  2. It has strong performance and solves the problem of insufficient power for high-power graphics cards.
  3. It adopts an environmentally friendly thick PCB board, and the solder joints are clean and clear overall.

Package Includes:

1 x 24Pin to SATA Dual Power Start Up Adapter Card

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.