
1 / 3 · Click to enlarge
AI Summary
A compact 24VDC mini electromagnet with a Φ4×6 mm detachable shaft and 0.5 N force. It is ideal for light-duty actuation in small appliances and mechanisms where space is limited.
Key Highlights
- 24VDC operation at 0.48 A for standard control supplies
- Approximately 0.5 N holding force for light-duty actuation
- Φ4×6 mm detachable shaft simplifies mounting and replacement
- Compact body fits tight spaces in small appliances
- Stable performance and high efficiency for extended life
- Suitable for massage products, induction stoves, and pet doors
Ideal For
- Appliance designers integrating compact actuators
- Repair technicians servicing massage chairs and small appliances
- DIY hobbyists building 24 V automation projects
- Product engineers prototyping light-duty mechanisms
- Makers needing a small detachable-shaft solenoid
Buying Tip
Confirm your mechanism needs no more than 0.5 N of force and that your 24 VDC supply can deliver 0.48 A before ordering this mini electromagnet.
Elecvora expert review
Our verdict
A well-sized 24 VDC mini electromagnet for light actuation tasks where space is tight and force requirements are modest. The detachable shaft is a practical touch for maintenance and alignment.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact Φ4×6 mm shaft fits small mechanisms
- 24 VDC and 0.48 A suit common control supplies
- Detachable shaft simplifies installation
- Stable performance for long life
- Low force ideal for delicate parts
Cons
- Only 0.5 N force, not for heavy loads
- Requires external 24 VDC supply and driver
- No datasheet or wiring included in package
Best for
Light-duty actuation in small appliances and prototypes
Not ideal for
High-force lifting or heavy mechanical switching
Specifications
| Item Type | DC Mini Electromagnet |
|---|---|
| Electromagnet Force (Kg) | 0.05 |
| Voltage Rating (V) | 24VDC |
| Current Rating (A) | 0.48 |
| Input Voltage (V) | 24 |
| Rated current (mA) | 480 |
| Shaft Type | Detachable |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 9 × 7 × 3 cm |
What's in the box
- 1 x 24V 0.5 N Φ4×6 mm Mini Electromagnet AJK-T0901
Frequently Asked Questions
What voltage does this electromagnet require?
How much force does it produce?
What is the shaft size?
What is included in the package?
Can I use it continuously?
How do I wire it?
Overview
The Generic AJK-T0901 is a DC mini electromagnet designed for compact mechanisms that require a small, controlled force. Operating at 24 VDC and drawing 0.48 A, it produces approximately 0.5 N of holding force through a Φ4×6 mm shaft. The detachable shaft design allows the magnet to be installed or serviced without replacing the entire assembly, which is useful in tight enclosures and low-clearance installations.
This electromagnet is part of a family of mini electromagnets and is intended for light-duty actuation where space and power are limited. It is not a high-force lifting magnet; rather, it is suited to triggering latches, dampers, or small mechanical links in consumer and household products.
Key Features
- 24VDC coil: Matches common 24 V control and adapter supplies.
- 0.48 A current draw: Low power consumption for continuous or intermittent duty in small devices.
- 0.5 N force: Gentle actuation for delicate mechanisms and lightweight parts.
- Φ4×6 mm detachable shaft: Simplifies alignment, replacement, and integration.
- Compact size: Fits into confined spaces inside appliances and prototypes.
- Stable performance: Designed for consistent operation and long service life.
Specifications Explained
The 24 VDC voltage rating means the electromagnet should be powered from a 24 V DC source capable of supplying at least 0.48 A. The rated current of 480 mA indicates the coil's consumption at 24 V; ensure your driver or supply can handle this load. The 0.5 N force rating describes the approximate holding or pulling force at the shaft, which is suitable for light mechanical tasks. The Φ4×6 mm shaft refers to the diameter and length of the detachable plunger, which must align with your mechanism's engagement point. With a shipping weight of 0.12 kg and dimensions of 9 × 7 × 3 cm, the unit is small and easy to handle during assembly.
Compatibility and Requirements
This electromagnet requires a 24 VDC power source and a switching device capable of handling 0.48 A, such as a relay, MOSFET, or appropriate driver circuit. It does not include a power supply or wiring harness. The detachable shaft must be matched to the mechanical interface of your application. Verify that the 0.5 N force is sufficient for your load before installation.
Typical Uses
- Massage products and chairs for gentle vibration or latch actuation
- Induction stoves for small damper or door mechanisms
- Disinfection cabinets for door or vent control
- Pet doors for lightweight locking or release
- DIY and prototyping projects requiring a compact 24 V solenoid
What's in the Box
Package includes 1 x 24V 0.5 N Φ4×6 mm Mini Electromagnet AJK-T0901.
Quick specs
- Item Type
- DC Mini Electromagnet
- Electromagnet Force (Kg)
- 0.05
- Voltage Rating (V)
- 24VDC
- Current Rating (A)
- 0.48
- Input Voltage (V)
- 24
- Rated current (mA)
- 480













