
1 / 3 · Click to enlarge
AI Summary
This 25cm IPEX1 to SMA female cable uses RG178 coax to link a PCB u.FL connector to an SMA antenna. The panel-mountable SMA end and 50-ohm impedance make it ideal for compact wireless and GPS setups.
Key Highlights
- 25cm RG178 coaxial cable for flexible routing
- IPEX1 (u.FL) to SMA female connector
- 50-ohm impedance for high-frequency use
- 11mm cable diameter for tight spaces
- Panel-mountable SMA female end
- Lightweight at just 0.005 kg shipping weight
Ideal For
- Makers building GPS or cellular trackers with u.FL ports
- Wireless module developers needing a panel-mount SMA link
- FPV and RC hobbyists adapting compact RF connections
- IoT device prototypers working with Wi-Fi or Bluetooth
- Electronics repair technicians replacing short RF jumpers
Buying Tip
Confirm your board has an IPEX1 (u.FL) jack and your antenna uses an SMA female connector before ordering, as this cable does not convert between other connector types.
Elecvora expert review
Our verdict
A practical, no-frills adapter cable for anyone who needs to move an antenna connection from a tiny u.FL port to a standard SMA panel mount. The 25cm RG178 lead is short enough to limit loss and long enough for most compact builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 25cm length suits tight enclosures
- 50-ohm RG178 coax for common RF systems
- Panel-mountable SMA female end adds flexibility
- Very lightweight and easy to route
Cons
- IPEX1 connectors are fragile and require careful handling
- Only 25cm long, so reach is limited in larger builds
- No mounting hardware or antenna included
Best for
Compact wireless, GPS, or cellular projects needing a short u.FL to SMA female link
Not ideal for
Long cable runs or high-power RF systems requiring thicker coax
Specifications
| Item Type | Connector Cable |
|---|---|
| Connector Type | IPEX1 to SMA Female Connector Cable |
| Cable Type | RG178 |
| Cable Length | 25 |
| Cable Specifications | 11 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 11 × 7.5 × 0.5 cm |
What's in the box
- 1 x 25CM IPEX1 to SMA Female Connector Cable 11mm RG178
Frequently Asked Questions
What is this cable used for?
Is the SMA end male or female?
What is the impedance of this cable?
Can I mount the SMA connector on a panel?
What is included in the package?
How should I care for this cable?
Overview
The 25CM IPEX1 to SMA Female Connector Cable is a short RF interface lead designed to bridge a miniature u.FL (IPEX1) board connector and a standard SMA female antenna connection. It uses RG178 coaxial cable with an 11mm cable diameter, keeping the assembly compact and easy to route inside small enclosures or behind panels. With 50-ohm impedance, it is built for high-frequency signal paths where a reliable, low-loss link between PCB and antenna is needed.
Key Features
- IPEX1 to SMA female: Connects a tiny u.FL PCB connector to an SMA antenna or panel mount.
- RG178 coax: Flexible 25cm cable with 11mm diameter for tight installations.
- 50-ohm impedance: Matches common RF systems for high-frequency applications.
- Panel-mountable SMA: The SMA female end can be secured to a panel for a stable external connection.
- Lightweight: Shipping weight of only 0.005 kg adds negligible load to your build.
Specifications Explained
Connector type: IPEX1 (often called u.FL) on one end and SMA female on the other. This lets you adapt a board-level u.FL port to a standard SMA antenna cable or bulkhead.
Cable type and length: RG178 coaxial cable, 25cm long, with an 11mm cable diameter. RG178 is a thin, flexible coax often used in compact RF assemblies; the 25cm length gives useful reach without excessive signal loss.
Impedance: 50 ohms, the standard for most Wi-Fi, Bluetooth, GPS, and cellular antenna systems.
Physical: Shipping dimensions of 11 × 7.5 × 0.5 cm and weight of 0.005 kg indicate a small, lightweight part that is easy to store and install.
Compatibility and Requirements
This cable is intended for devices that have a u.FL (IPEX1) connector on the PCB and require an SMA female antenna connection. It is suitable for GPS and cellular antennas, as well as Wi-Fi and Bluetooth wireless communication systems. No additional tools are specified beyond standard handling; ensure the mating connectors are compatible with IPEX1 and SMA female interfaces.
Typical Uses
- Connecting a GPS antenna to a board with a u.FL port.
- Linking a cellular antenna to a compact wireless module.
- Extending a Wi-Fi or Bluetooth antenna connection to a panel-mounted SMA port.
- RF prototyping and DIY electronics projects requiring a short IPEX1-to-SMA lead.
What's in the Box
1 x 25CM IPEX1 to SMA Female Connector Cable 11mm RG178.
Quick specs
- Item Type
- Connector Cable
- Connector Type
- IPEX1 to SMA Female Connector Cable
- Cable Type
- RG178
- Cable Length
- 25
- Cable Specifications
- 11
- Shipping Weight
- 0.005 kg













