Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 25cm RG1.13 coaxial cable with an SMA female connector on one end and a stripping head on the other. It simplifies custom antenna and RF connections by giving you a ready-made SMA interface with a solder-ready tail.

Key Highlights

  • 25cm RG1.13 cable for short, flexible RF runs
  • SMA female connector with 36 TPI threaded barrel
  • Stripping head allows direct soldering or custom termination
  • 50 Ohm impedance for RF and antenna applications
  • 11mm connector length fits tight spaces
  • Rated for up to 500 coupling cycles

Ideal For

  • RF hobbyists building custom antenna leads
  • Electronics technicians repairing SMA connections
  • IoT developers prototyping with GSM modules
  • Makers working on compact wireless projects
  • Anyone needing a short SMA female to solder-tail cable

Buying Tip

Check that your device uses an SMA male connector and that you are comfortable soldering the stripping head before purchase.

Elecvora expert review

Our verdict

A straightforward, no-frills RF cable that saves time when you need an SMA female interface with a solder-ready tail. It is well suited to light-duty prototyping and repairs, though the stripping head demands some soldering skill.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Ready-made SMA female to stripping head saves assembly time
  • Flexible RG1.13 cable routes easily in tight spaces
  • 50 Ohm impedance matches common RF systems
  • Rated for 500 coupling cycles

Cons

  • Requires soldering to terminate the stripping head
  • No datasheet or frequency-specific performance data included

Best for

Quick RF prototyping and antenna repairs

Not ideal for

High-power or long-run RF installations

Specifications

Item TypeConnector Cable
Connector TypeSMA Female to Stripping Head
Cable TypeRG1.13
Cable Length25
Connector Length (mm)11
Shipping Weight0.005 kg
Shipping Dimensions11 × 8 × 0.5 cm

What's in the box

  • 1 x 25CM SMA Female to Stripping Head Connector Cable 11mm RG1.13

Frequently Asked Questions

What is a stripping head connector?
A stripping head is an unterminated cable end where the outer jacket and shield are stripped back to expose the center conductor and shield for soldering or custom termination.
Will this cable work with my GSM module?
It will work if your GSM module has an SMA male connector and operates at 50 Ohm impedance. Check your module's connector type before buying.
What is the impedance of this cable?
The cable and SMA connector are rated at 50 Ohm, matching common RF and antenna systems.
How long is the cable?
The cable is 25cm long, and the connector body measures 11mm.
What is included in the package?
The package includes one 25CM SMA Female to Stripping Head Connector Cable 11mm RG1.13.
How should I care for this cable?
Keep connectors clean and dry, avoid sharp bends, and hand-tighten the SMA coupling to prevent damage. Do not exceed the 500-cycle rating.

Overview

The 25CM SMA Female to Stripping Head Connector Cable is a compact RF coaxial assembly designed to bridge standard SMA interfaces and custom solder points. One end features a female SMA connector with a threaded barrel, while the other end is a stripping head that exposes the RG1.13 cable for direct soldering or termination. This makes it a practical building block for antenna leads, RF module connections, and prototype wiring where a full custom cable would be overkill.

With a 25cm length and a thin 11mm RG1.13 cable, the assembly is easy to route through small openings and around tight components. The 50 Ohm impedance matches common RF systems, and the SMA interface is rated for up to 500 coupling cycles when properly torqued.

Key Features

  • SMA female connector: standard threaded interface with a central receptacle for mating with SMA male plugs.
  • Stripping head termination: exposes the coax for soldering to boards, pads, or custom connectors.
  • RG1.13 cable: flexible 11mm-diameter coax that maintains signal integrity over short distances.
  • 25cm length: a moderate run that suits internal wiring and compact enclosures.
  • 500-cycle coupling rating: supports repeated connect and disconnect cycles when the recommended torque is applied.

Specifications Explained

Connector type: SMA female to stripping head. The SMA side mates with any standard SMA male connector, while the stripping head gives you bare cable for custom work.

Cable type and length: RG1.13 coax, 25cm long. RG1.13 is a thin, flexible 50 Ohm cable well suited to short internal runs where space is limited.

Connector length: 11mm. This short body helps the connector fit in dense layouts without adding strain.

Impedance: 50 Ohm, the common standard for RF, GSM, and antenna systems. The PTFE dielectric used in SMA connectors supports stable performance from DC up to 18GHz.

Compatibility and Requirements

This cable is compatible with any device or antenna that uses a standard SMA male connector. The stripping head requires soldering or a suitable termination method to complete the connection. No additional adapters are needed for SMA male interfaces. Ensure your mating connector is SMA male and that your project operates within the 50 Ohm impedance and frequency range of the cable.

Typical Uses

  • Connecting antennas to GSM and RF modules
  • Prototyping wireless devices with SMA test points
  • Repairing or replacing short antenna jumpers
  • Custom cable assemblies for compact enclosures
  • RF signal routing in DIY electronics projects

What's in the Box

1 x 25CM SMA Female to Stripping Head Connector Cable 11mm RG1.13

Connector Length and Cable Length

Quick specs

Item Type
Connector Cable
Connector Type
SMA Female to Stripping Head
Cable Type
RG1.13
Cable Length
25
Connector Length (mm)
11
Shipping Weight
0.005 kg
See all specifications