
1 / 3 · Click to enlarge
At a glance
This ac to dc power supply module is a good fit for makers, students and electronics hobbyists. Main specs: input voltage 8V – 40V DC; output voltage 3.3V DC; continuous discharge current (a) 700mA(output). Check that your power source supplies 8V – 40V DC before connecting it.
Key Highlights
- Input Voltage: 8V – 40V DC
- Output Voltage: 3.3V DC
- Continuous Discharge Current (A): 700mA(output)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Input Voltage | 8V – 40V DC |
|---|---|
| Output Voltage | 3.3V DC |
| Continuous Discharge Current (A) | 700mA(output) |
| Length (mm) | 25 |
| Width (mm) | 15 |
| Weight (g) | 04 |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
Overview
The 3.3V DD38LOSA DC-DC Conversion, Voltage Stabilization, Power Supply Module without Pin is listed in our ac to dc power supply module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Input Voltage: 8V – 40V DC (match this to your power supply; too high a voltage can damage the part)
- Output Voltage: 3.3V DC (match this to your power supply; too high a voltage can damage the part)
- Continuous Discharge Current (A): 700mA(output) (your supply must deliver at least this much current)
- Length (mm): 25 (measure your mounting space before ordering)
- Width (mm): 15 (measure your mounting space before ordering)
- Weight (g): 04 (important for drones, RC models and anything you carry)
- Operating Voltage (V): 2.7~5.5 (match this to your power supply; too high a voltage can damage the part)
- Dimensions (L x W x H) mm: 170 x 130 x 130 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The 3.3V DD38LOSA DC-DC Conversion Module is engineered for efficient voltage regulation across a wide input range of 8V to 40V. By combining a DC-DC converter with an LDO regulator, it ensures a clean and stable 3.3V output suitable for sensitive electronics. The module supports up to 700mA continuous output current and 1000mA peak surge current, making it reliable for microcontrollers, sensors, and automation circuits.
Built-in short circuit and thermal protection enhance safety and durability. With a compact size of 25 x 16 x 5.8mm, it fits easily into embedded and industrial systems. Its low quiescent current design improves energy efficiency, making it a dependable power solution for robotics, DIY electronics, and regulated DC supply applications.
Features:
- Stable 3.3V regulated output
- Wide 8V to 40V input range
- 700mA continuous output current
- 1000mA peak surge current
- Built-in short circuit protection
- Thermal protection support
- Low 5mA typical quiescent current
Package Includes:
1 x 3.3V DD38LOSA DC-DC Conversion, Voltage Stabilization, Power Supply Module without PinQuick specs
- Input Voltage
- 8V – 40V DC
- Output Voltage
- 3.3V DC
- Continuous Discharge Current (A)
- 700mA(output)
- Length (mm)
- 25
- Width (mm)
- 15
- Weight (g)
- 04













