Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A gold-plated 3.5mm three-pole plug for building or repairing stereo headset and earphone cables yourself. It lets you replace a damaged jack and keep your favourite wired headphones in use.

Key Highlights

  • 3.5mm three-pole audio connector for stereo left, right and ground
  • Gold-plated contact surfaces for a clean, corrosion-resistant connection
  • Compact 37 mm length and 8 mm diameter plug body
  • Ideal for DIY cable builds and earphone jack repairs
  • Lightweight single-piece adapter weighing about 0.001 kg shipping weight
  • Works with standard 3.5mm stereo headset wiring projects

Ideal For

  • DIYers repairing broken earphone jacks
  • Hobbyists building custom stereo headphone cables
  • Repair technicians servicing wired headsets
  • Makers working on small audio electronics projects
  • Anyone replacing a worn 3.5mm stereo plug

Buying Tip

Check that your cable has exactly three conductors for left, right and ground before ordering, since this plug has no fourth contact for a microphone.

Elecvora expert review

Our verdict

A tidy, low-cost component for anyone who repairs wired earphones rather than replacing them. The gold-plated three-pole design covers the most common stereo headphone wiring job without fuss.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Gold-plated contacts for a cleaner connection
  • Compact 37 mm length and 8 mm diameter
  • Simple three-pole layout for stereo repairs
  • Very light and easy to store in a parts drawer

Cons

  • Requires soldering skill and tools
  • No fourth pole, so unsuitable for microphone headsets
  • Colour varies and cannot be chosen at checkout

Best for

DIY earphone and headset cable repairs

Not ideal for

Headsets that need a microphone contact

Specifications

ManufacturerGeneric
Additional Specs.Audio Connector: 3.5mm
No of poles3
Length (mm)37
Diameter (mm)8
Model No. / NameInterface Adapter
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 3.5mm Audio Plug 3 Pole Gold-plated Earphone Adapter for DIY Stereo Headset

Frequently Asked Questions

What is this plug used for?
It is a replacement 3.5mm three-pole connector for building or repairing stereo headset and earphone cables. You solder your own cable conductors to it.
Does it support a microphone?
No. It has three poles for left, right and ground only. Headsets that carry a microphone need a fourth contact.
Will it fit my headphones?
It fits devices and cables designed for a standard 3.5mm stereo jack. Check that your cable has three conductors before ordering.
What is included in the package?
One 3.5mm Audio Plug 3 Pole Gold-plated Earphone Adapter. Cable, tools and headphones are not included.
What colour will I receive?
The plug is available in several colours and the colour is assigned at shipping, so you may receive any of them.
How should I care for the connector?
Keep the contacts clean and dry, avoid sharp bends at the cable entry and use heat-shrink for strain relief after soldering.

Overview

The Generic 3.5mm Audio Plug is a three-pole, gold-plated connector made for people who build and repair their own stereo headset cables. Instead of discarding earphones because the plug has failed, you can fit a fresh connector, solder your existing cable conductors to it and return the headset to service. The part measures roughly 37 mm in length with an 8 mm diameter body, giving it the slim profile associated with everyday wired listening gear.

This is a component, not a finished cable. It suits hobbyists, repair technicians and anyone comfortable with a soldering iron who wants a straightforward replacement jack.

Key Features

  • Three-pole configuration: carries left channel, right channel and a shared ground for standard stereo audio.
  • Gold-plated finish: helps keep the contact surface clean and resistant to tarnish over repeated plugging.
  • Compact dimensions: 37 mm length and 8 mm diameter for a familiar, low-profile fit.
  • DIY-friendly: intended for custom cable builds and repair work rather than plug-and-play use.
  • Very light: shipping weight of about 0.001 kg, so it adds no meaningful bulk to a project.

Specifications Explained

3.5mm audio connector

The 3.5mm size is the common small jack found on portable audio players, phones with a headphone socket and many wired headsets. Matching this size means the finished cable will fit devices designed for that standard socket.

Three poles

Three poles correspond to the tip, ring and sleeve contacts. In practice that means one conductor each for the left and right earpieces plus a shared ground return. This is the right choice for plain stereo listening; it is not intended for headsets that also carry a microphone signal on a fourth contact.

Gold plating

The gold-plated surface is there to support reliable electrical contact and resist the dulling that affects bare metal contacts over time.

Size and weight

At 37 mm long and 8 mm across, the plug stays compact enough for pocket devices and slim headphone cups. Its negligible weight keeps cable assemblies balanced.

Compatibility and Requirements

This adapter is designed for 3.5mm three-pole stereo connections. It is a bare connector, so successful use depends on your own cable, soldering tools and a little patience. Colour varies between shipments, so the plug you receive may differ from the one pictured.

Typical Uses

  • Replacing a broken or intermittent 3.5mm plug on wired earphones
  • Building a custom-length stereo headphone cable
  • Repairing a headset lead where only the jack end has failed
  • Small electronics and audio DIY projects needing a stereo jack

What's in the Box

One 3.5mm Audio Plug 3 Pole Gold-plated Earphone Adapter. Cable, tools and headphones are not included.

Quick specs

Manufacturer
Generic
Additional Specs.
Audio Connector: 3.5mm
No of poles
3
Length (mm)
37
Diameter (mm)
8
Model No. / Name
Interface Adapter
See all specifications