
1 / 3 · Click to enlarge
AI Summary
A 30cm RG178 cable that adapts a tiny IPEX1/u.FL board connector to a panel-mountable SMA female port. It gives you a flexible, low-profile link between PCB RF points and external antennas.
Key Highlights
- 30cm length for flexible routing inside enclosures
- IPEX1 to SMA female connector for board-to-antenna links
- 11mm RG178 cable keeps the assembly thin and bendable
- SMA female end can be panel-mounted
- Lightweight at just 0.005 kg shipping weight
- Suits GPS, cellular and other RF antenna connections
Ideal For
- Makers connecting GPS antennas to PCB u.FL pads
- FPV and RC builders needing a short antenna lead
- RF prototyping and small device builds
- Technicians panel-mounting an SMA female port
- Cellular antenna connections on embedded boards
Buying Tip
Confirm that your board has an IPEX1/u.FL connector and your antenna uses an SMA female port, since this cable adapts between those two specific interfaces.
Elecvora expert review
Our verdict
A simple, well-sized adapter cable for moving an RF connection from a tiny board pad to an SMA female antenna port. The 30cm RG178 lead is flexible and light, making it a sensible choice for compact builds where space and weight matter.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 30cm length gives useful routing slack
- Thin, flexible RG178 cable
- Panel-mountable SMA female end
- Very lightweight at 0.005 kg
- Clear IPEX1 to SMA female adaptation
Cons
- Only one cable is included
- Requires matching IPEX1 and SMA female interfaces
- No additional specs or ratings are provided
Best for
Compact RF projects needing a short board-to-antenna link
Not ideal for
Devices with SMA male or non-IPEX1 board connectors
Specifications
| Item Type | Connector Cable |
|---|---|
| Connector Type | IPEX1 to SMA Female Connector |
| Cable Type | RG178 |
| Cable Length | 30 |
| Connector Length (mm) | 11 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 11 × 8 × 0.5 cm |
What's in the box
- 1 x 30CM IPEX1 to SMA Female Connector Cable 11mm RG178
Frequently Asked Questions
What connectors does this cable have?
Can I use this to connect a GPS antenna to my board?
Is the SMA female end panel-mountable?
What is included in the package?
How should I care for this cable?
Does this cable work with any frequency?
Overview
The 30CM IPEX1 to SMA Female Connector Cable with 11mm RG178 is a compact RF interface lead designed to bridge a small IPEX1 (u.FL-style) connector on a printed circuit board and an SMA female antenna port. The 30cm cable length provides useful slack for routing through an enclosure or across a small assembly, while the RG178 cable keeps the profile thin and flexible. The SMA female end can be mounted to a panel, so you can bring an antenna connection cleanly through a case wall.
This cable is intended for builders and technicians who need a straightforward, short-run connection between a board-level RF point and an external antenna or RF device. It is lightweight and small enough to suit portable and weight-sensitive projects.
Key Features
- IPEX1 to SMA female: adapts a tiny board connector to a standard SMA female antenna port.
- 30cm RG178 cable: gives routing flexibility while keeping the lead thin and bendable.
- 11mm connector length: a compact SMA female body that can be panel-mounted.
- Lightweight build: approximately 0.005 kg shipping weight, adding minimal bulk.
- Practical for RF links: suited to GPS and cellular antenna connections on PCBs.
Specifications Explained
Connector type: IPEX1 on one end and SMA female on the other. IPEX1 is the very small board-side connector often used for u.FL-style pads, while SMA female is a common threaded antenna interface. This combination lets you move an RF connection from inside a device to an external antenna port.
Cable type and length: RG178 is a thin, flexible coaxial cable. The 30cm length is long enough to route around small components but short enough to keep the run tidy inside compact builds. The 11mm connector length refers to the SMA female body, which is short enough for panel-mounting in tight spaces.
Weight and dimensions: At 0.005 kg shipping weight and 11 × 8 × 0.5 cm shipping dimensions, the cable is easy to store and adds almost nothing to the weight of a finished project.
Compatibility and Requirements
This cable is compatible with devices that have an IPEX1 (u.FL-style) board connector and antennas or RF equipment with an SMA female port. The SMA female end can be mounted to a panel. No other compatibility details are specified. Check that your board uses an IPEX1 connector and that your antenna or device uses an SMA female connection before ordering.
Typical Uses
- Connecting a GPS antenna to a PCB with an IPEX1 pad.
- Linking a cellular antenna to a board-level u.FL connector.
- Bringing an SMA female antenna port through an enclosure panel.
- RF prototyping and small RF device builds.
- Drone, RC and FPV projects that need a short antenna lead.
What's in the Box
1 x 30CM IPEX1 to SMA Female Connector Cable 11mm RG178.

Quick specs
- Item Type
- Connector Cable
- Connector Type
- IPEX1 to SMA Female Connector
- Cable Type
- RG178
- Cable Length
- 30
- Connector Length (mm)
- 11
- Shipping Weight
- 0.005 kg













