
1 / 3 · Click to enlarge
AI Summary
A 30 cm jumper cable joining an RP-SMA female connector with a 13 mm threaded body to an IPEX1 connector via flexible RG1.13 coax. It lets you route an external antenna from a compact wireless module through a panel or enclosure.
Key Highlights
- RP-SMA female connector on one end, IPEX1 on the other
- 30 cm RG1.13 coaxial cable for flexible internal routing
- 13 mm threaded RP-SMA body for panel or enclosure mounting
- Slim, lightweight design at roughly 4 g per cable
- Works as a short jumper between module and antenna port
- Suitable for wireless modules, IoT hardware and custom builds
Ideal For
- RF hobbyists building custom wireless projects
- IoT developers needing a short module-to-antenna jumper
- Electronics repair technicians replacing internal antenna cables
- Makers working with compact radio modules and enclosures
Buying Tip
Confirm your module has an IPEX1 socket and your antenna uses an RP-SMA male connector before ordering, since RP-SMA and standard SMA are not interchangeable.
Elecvora expert review
Our verdict
A simple, well-sized jumper for moving an antenna connection off a compact wireless module. The thin RG1.13 cable and 13 mm threaded body make it easy to fit into small enclosures.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Flexible RG1.13 cable routes easily in tight spaces
- 13 mm threaded body supports panel mounting
- Short 30 cm length keeps internal runs tidy
- Lightweight at about 4 g
Cons
- Only one cable is included per pack
- Connector genders must be checked carefully before purchase
- No performance ratings are specified by the manufacturer
Best for
Makers and technicians linking IPEX1 modules to an external RP-SMA antenna
Not ideal for
Users who need standard SMA rather than reverse-polarity SMA
Specifications
| Item Type | Connector Cable |
|---|---|
| Model No. / Name | 30CM RP-SMA Female to IPEX1 Connector Cable Thread 13mm RG1.13 |
| Connector Type | RP-SMA Female to IPEX1 Connector |
| Cable Type | RG1.13 |
| Cable Length | 30 |
| Connector Length (mm) | 13 |
| Weight (g) | 4 each |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 10.5 × 8 × 0.5 cm |
What's in the box
- 1 x 30CM RP-SMA Female to IPEX1 Connector Cable Thread 13mm RG1.13
Frequently Asked Questions
What is the difference between RP-SMA and standard SMA?
How long is the cable?
What devices does the IPEX1 end fit?
Is anything else included?
How should I care for the cable?
Overview
This adapter cable connects an RP-SMA female connector to an IPEX1 connector using 30 cm of RG1.13 coaxial cable. It is a practical jumper for anyone who needs to bring an antenna connection out of a small enclosure or link a compact wireless module to an external antenna port.
The RP-SMA end features a 13 mm threaded body, which allows it to be secured through a panel or housing wall. The IPEX1 end is the small snap-on style used on many miniature radio modules and development boards. Because RG1.13 is a thin, flexible coax, the cable bends easily around tight internal layouts.
Key Features
- Dual connector design: RP-SMA female on one end, IPEX1 on the other.
- 30 cm cable length: enough reach for most small enclosures without excess slack.
- RG1.13 coax: slim and flexible for crowded internal spaces.
- 13 mm threaded body: supports panel or chassis mounting of the RP-SMA end.
- Lightweight: approximately 4 g per cable, so it adds almost nothing to a portable build.
Specifications Explained
Connector types
RP-SMA is a reverse-polarity variant of the SMA connector, where the gender roles of the inner contact and body are swapped compared with standard SMA. This cable uses the female RP-SMA version, so check that your antenna or mating connector is the correct counterpart before ordering.
Cable type and length
RG1.13 is a thin coaxial cable with a central conductor, insulation, shielding and an outer jacket. Its small diameter makes it easy to route inside compact devices. The 30 cm length gives useful reach while keeping signal paths short.
Thread length
The 13 mm threaded section on the RP-SMA end is the part that passes through a panel or mounting hole. Confirm your enclosure thickness and hole size suit this thread length before installation.
Compatibility and Requirements
This cable is intended for devices that use an IPEX1 board connector and an RP-SMA antenna connection. Match both connector types carefully: an IPEX1 socket is required on the module side, and an RP-SMA female cable pairs with an RP-SMA male antenna or adapter. No other ratings or certifications are specified for this product.
Typical Uses
- Connecting wireless communication modules to an external antenna
- IoT devices and compact radio boards
- Custom electronics and prototyping projects
- Repair or replacement of an internal antenna jumper
What's in the Box
1 x 30CM RP-SMA Female to IPEX1 Connector Cable Thread 13mm RG1.13

Quick specs
- Item Type
- Connector Cable
- Model No. / Name
- 30CM RP-SMA Female to IPEX1 Connector Cable Thread 13mm RG1.13
- Connector Type
- RP-SMA Female to IPEX1 Connector
- Cable Type
- RG1.13
- Cable Length
- 30
- Connector Length (mm)
- 13













