Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This tools, industrial & scientific is a good fit for DIY builders and repair work.

Ideal For

  • Repairs around the home
  • Electronics bench work
  • Workshop jobs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The 4.3" Software Defined Radio SDR Radio Receiver 100K-149MHz Digital Demodulation Short Wave FM MW SSB CW HAM DSP Receiver is listed in our tools, industrial & scientific range and suits DIY builders and repair work. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Description:

SDR 101 is a DSP digital demodulation radio based on SDR software-defined radio architecture. It has a 192kHz width spectrogram and waterfall display capabilities, and cooperates with 16bit sampling to realize a high dynamic receiver with CW, AM, SSB, FM demodulation functions. The whole machine adopts an all-aluminum alloy CNC shell, with a 4.3-inch 800x480 resolution high-brightness IPS LCD display, while maintaining a compact and compact body.

Immediately take it to the outdoors, enjoy the natural scenery and the fun of listening anytime, anywhere!


Tips :Only the frequency input function can be touched. Other functions do not support touch screen function and can only be selected by pressing the knob.




Basic parameters:

Display technology:: 4.3-inch IPS 800x480 resolution DC dimming bright LCD

Control method: resistive touch screen + rotary encoder

Frequency range: 100k – 149MHz

Working mode: CW, AM, SSB single sideband (LSB/USB), WFM, FM broadcast stereo (requires earphones)

Step frequency: 1Hz/10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

Spectral bandwidth: 192kHz, 128kHz, 64kHz, FFT real-time spectrum display

Antenna interface: BNC male, impedance 50Ω, maximum input power -20dBm

Reference crystal: TCXO 26MHz ±0.5ppm

Audio interface: support ordinary 3.5mm earphone or CTIA (American Standard) interface earphone

Speaker power: maximum 3W, 4Ω multimedia speaker speaker

Charging port: USB Type-C, 5.0V/2A

Current consumption: about 250mA @ 5V

Battery capacity: 5000mAh/3.7V, 18.5Wh

Use time: About 10-12 hours, depending on the volume and brightness settings of the machine

Channel saving: 99 channels can be preset, preset radio station name, station frequency and demodulation mode

Body size: 136 x 74 x 22mm (L x W x H) (without protrusions)

Body weight: about 310g (host only)


Receiver parameters

RF preamp gain: fixed 20dB

Circuit Type: Zero IF ZIF

Sideband suppression: ≥ 50dB


Test conditions: 50 ohm input impedance, preamp 20dB on, AGC on


Display control item list

Twelve items that can be selected by the encoder

1. Channel selection : 1-99

2. Frequency setting : 100k – 149MHz, minimum step 1Hz

3. Speaker volume(SPK) : 0~35dB, 1dB step

4. Earphone volume(EAR) : 0~35dB, 1dB step

5. Modulation : CW, LSB, USB, AM, WFM, STE(FM stereo), I/Q

6. AGC setting : OFF, SLOW, MID, FAST

7. Reference level(REF) : -99~99dB, 1dB step

8. Backlight brightness(LCD) : 1%~99%

9. IF GAIN : -12~67dB, 1dB step

10. Spectrum style settings : Green fill, Green line, Blue fill, White line

11. Spectrum bandwidth settings : RF spectrum (192kHz, 128kHz, 64kHz) and Audio spectrum (64kHz)

12. Waterfall area settings:Waterfall or Waveform (x1 / x8 / x64 amplitude)

Five items not selectable by the encoder

A. battery level display

B. date and time settings

C. radio information display: preset radio name capability

D. display of current spectrum bandwidth

E. (POWER) antenna port input power display


State of charge and discharge


Attention points

1. The machine adopts SDR architecture. If there is a strong broadcasting station near you, the phenomenon of mirror radio may appear.

2. The input impedance of the antenna interface is 50Ω. For the LW/MW radio, it is recommended to connect a dedicated active antenna for better listening effect.

3. Please pay attention to the volume setting of the earphone (EAR) before using the earphone to listen to avoid discomfort caused by excessive volume.



Supported frequency bands and coverage


Package Included:

1 x SDR 101 4.3 inch IPS screen host
1 x USB Type-C data cable
1 x BNC 7-section whip antenna
1 x Quick Start Guide Instruction Manual
1 x Resistive screen double-head touch pen



Product Safety Information