Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This ir and rf transmitters and receivers is a good fit for makers, students and electronics hobbyists. Main specs: item type RF Remote Control; rated voltage (vdc) 12; max. operating current (a) 10mA at 12V.. Check that your power source supplies 12 before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: RF Remote Control
  • Rated Voltage (VDC): 12
  • Max. Operating Current (A): 10mA at 12V.

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeRF Remote Control
Rated Voltage (VDC)12
Max. Operating Current (A)10mA at 12V.
Radiated power10mW at 12V
Transmission Distance3 to 5 (open field, the receiver sensitivity of -100dbm)
Transmitting frequency315MHZ.
Length (mm)64
Width (mm)39
Weight (g)30
Shipping Weight0.033 kg
Shipping Dimensions6 × 6 × 2 cm

Overview

The 4 Channel Wireless Four Button RF Remote without Control Transceiver Module (Mode: Non Locking) is listed in our ir and rf transmitters and receivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: RF Remote Control
  • Rated Voltage (VDC): 12 (match this to your power supply; too high a voltage can damage the part)
  • Max. Operating Current (A): 10mA at 12V. (your supply must deliver at least this much current)
  • Radiated power: 10mW at 12V
  • Transmission Distance: 3 to 5 (open field, the receiver sensitivity of -100dbm)
  • Transmitting frequency: 315MHZ. (make sure the rest of your system works at this frequency)
  • Length (mm): 64 (measure your mounting space before ordering)
  • Width (mm): 39 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The 4 Channel Wireless Four Button RF Remote without Control Transceiver Module is a compact and easy-to-use solution for wireless control applications. Designed for basic remote switching needs, this module features Non-Locking (Momentary) mode, where each button press results in a short high-level output signal from the receiver, returning to low once the button is released. RF Remote  is ideal for hobby electronics, DIY automation projects, and prototyping, the remote control works with standard 315 MHz ASK-type RF receivers and decoders (not included in this package). This transmitter is commonly used in systems like wireless door locks, remote lighting, garage doors, and microcontroller-based applications. Note:
  1. The remote control does not come with the battery due to Air shipping limitations you have to buy it separately.
  2. Ensure the receiver is compatible with 315 MHz ASK signals and fixed code encoding.


Operation Modes (This Unit: Non-Locking by Default):
  1. Non-Locking (Jog Mode):

    • Output is high only while a button is pressed.

    • Once released, output returns to low.

    • Ideal for momentary control such as door locks, relays, or MCU triggers.

  2. Self-Locking Mode (Not pre-configured):

    • Pressing a button toggles the output ON; pressing again turns it OFF.

    • Useful for devices like lights or motors that need to remain active.

  3. Interlocking Mode (Not pre-configured):

    • Only one output can be active at a time.

    • Activating one channel deactivates the others.

    • Suitable for fan speed control, multi-state switches, etc

Note: Only Non-Locking mode is enabled by default. Reconfiguration is required for Self-Locking or Interlocking modes.

Features:

  1. Mode: Non-Locking (Momentary/Jog)
  2. Control Channels: 4
  3. Modulation Type: ASK (Amplitude Shift Keying)
  4. Encoder Type: Fixed Code
  5. Transmission Frequency: 315 MHz SAW-based
  6. Operating Voltage (Receiver): DC 5V
  7. Size: 7mm x 22mm x 41mm (Receiver Module)
  8. Transmitter Range: Depends on antenna setup; recommended antenna: 17 cm (quarter-wavelength, 50-ohm single wire)

Pin Configurations:
VT – Valid Transmission Indicator (High when signal is received) D3 – Data Output (Button 4) D2 – Data Output (Button 3) D1 – Data Output (Button 2) D0 – Data Output (Button 1) +5V – Positive Power Supply GND – Ground ANT – Antenna Terminal

Package Includes :

1 x 4 Channel Wireless Four Button RF Remote without  Control Transceiver Module

Quick specs

Item Type
RF Remote Control
Rated Voltage (VDC)
12
Max. Operating Current (A)
10mA at 12V.
Radiated power
10mW at 12V
Transmission Distance
3 to 5 (open field, the receiver sensitivity of -100dbm)
Transmitting frequency
315MHZ.
See all specifications