
1 / 3 · Click to enlarge
AI Summary
This is a 433.92MHz superheterodyne RF receiver module with an included antenna, offering high sensitivity and low power consumption. It outputs digital data for microcontrollers, making it ideal for remote control and automation projects.
Key Highlights
- Superheterodyne design for stable 433.92MHz reception
- High sensitivity of -106dBm for extended range
- Low working current of 4mA at 3-5V
- Supports ASK/OOK modulation
- Compact 30mm length with included antenna
- Requires external MCU or decoder for data processing
Ideal For
- Electronics hobbyists building custom remote controls
- Makers integrating wireless receivers into Arduino projects
- Engineers prototyping home automation systems
- Technicians repairing or upgrading garage door receivers
- Students learning about RF communication
Buying Tip
Check that your transmitter uses 433.92MHz and ASK/OOK modulation, and plan for a microcontroller to decode the output.
Elecvora expert review
Our verdict
A solid, no-frills 433MHz receiver that offers good sensitivity and low power draw for the price. It is a practical choice for DIY and prototyping where you need dependable ASK/OOK reception.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Superheterodyne design provides stable reception
- High sensitivity extends usable range
- Low current draw suitable for battery projects
- Compact size with included antenna
- Works with common 433MHz transmitters
Cons
- Requires external microcontroller or decoder to interpret data
- No onboard decoding or pairing button
- Antenna may need tuning for optimal range
Best for
Makers and engineers needing a reliable 433MHz receiver for custom wireless projects
Not ideal for
Users looking for a plug-and-play receiver with built-in decoding
Specifications
| Item Type | RF Module |
|---|---|
| Rated Voltage (VDC) | 3 to 5 |
| Operating Frequency (MHz) | 433.92 |
| Working Current (mA) | 4mA |
| Modulation Type | ASK/OOK |
| Sensitivity (dBm) | -106 |
| Operating Temperature (°C) | -10 ~ 60 |
| Length (mm) | 30 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 3 × 2 × 2 cm |
What's in the box
- 1 x 433MHz RF Receiver Module KL-CW11 with antenna
Frequently Asked Questions
What is the operating voltage of this module?
Does this receiver decode the signal by itself?
What frequency does it receive?
Is an antenna included?
What modulation types are supported?
Can I use this with an Arduino?
Overview
The KL-CW11 is a 433.92MHz RF receiver module that uses a superheterodyne architecture to provide reliable short-range wireless reception. It is designed for engineers, hobbyists, and makers who need a dependable receiver for ASK/OOK signals. The module operates from a 3 to 5 VDC supply and draws only 4mA, making it suitable for low-power applications. With a sensitivity of -106dBm, it can pick up weak signals, and the included antenna simplifies integration. The compact 30mm board fits easily into tight enclosures, and the output is a digital data stream that can be decoded by an external microcontroller or decoder IC.
Key Features
- Superheterodyne RF design: Provides stable performance and better selectivity compared to simple super-regenerative receivers.
- Fixed 433.92MHz operating frequency: Matches common 433MHz transmitters and remote controls.
- High sensitivity: -106dBm sensitivity helps maintain reliable reception at longer distances.
- ASK/OOK modulation support: Compatible with widely used on-off keying signals.
- Low power consumption: 4mA working current at 3-5V, ideal for battery-operated devices.
- Compact size: 30mm length with a small footprint for easy installation.
- Antenna included: Ready to use without additional antenna sourcing.
Specifications Explained
Operating voltage (3-5 VDC): The module can be powered from common 3.3V or 5V logic supplies, making it easy to interface with most microcontrollers. Frequency (433.92MHz): This is a standard ISM band frequency, so it works with many off-the-shelf 433MHz transmitters. Working current (4mA): Very low current draw means it won't drain batteries quickly in portable projects. Sensitivity (-106dBm): A lower dBm value indicates better sensitivity; -106dBm allows the receiver to detect weak signals, which can translate to longer range or more reliable reception in obstructed environments. Modulation (ASK/OOK): The receiver expects simple on-off keyed signals, which are common in remote controls and sensor transmitters. Operating temperature (-10 to 60°C): Suitable for indoor and sheltered outdoor use in most climates.
Compatibility and Requirements
The KL-CW11 is designed to work with 433MHz RF transmitter modules that use ASK/OOK modulation. It does not decode data on its own; you need an external microcontroller (such as Arduino, Raspberry Pi, or ESP32) or a dedicated decoder IC to interpret the digital output. The module requires a power supply within 3 to 5 VDC and a suitable antenna connection (the included antenna can be soldered or connected as needed). No specific library or code is provided, but many open-source libraries exist for decoding common 433MHz protocols.
Typical Uses
- Wireless remote control systems for lights, appliances, and toys
- Garage door and gate controllers
- Home automation and smart home sensors
- Car security and alarm systems
- Short-distance data communication between devices
- DIY and educational electronics projects
What's in the Box
- 1 x 433MHz RF Receiver Module KL-CW11 with antenna
Quick specs
- Item Type
- RF Module
- Rated Voltage (VDC)
- 3 to 5
- Operating Frequency (MHz)
- 433.92
- Working Current (mA)
- 4mA
- Modulation Type
- ASK/OOK
- Sensitivity (dBm)
- -106













