Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This driver module is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The 450W 20A H Bridge DC Motor Speed Controller Driver Module DC12-36V PWM Level Motor Control Switch Forward Reverse Brake is listed in our driver module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Specifications:
Product Name: 450W 20A H Bridge DC Motor Speed Controller Driver Module
Applicable Range: Large power DC motor drive, Widely used in large cars, robots, etc.
Drive Voltage: DC 11-36V input direct current voltage (NO alternating current input)
Output Current: Rated continuous output 24V at 15A, 360W with no need for radiator, max 36V 15A 450W
Output Power: Natural cooling rating at 450W when supplied 36V 15A
Working Temperature: Industrial-grade (-40°C to +85°C).
Weight: 293g

Features:

1. Versatile Control: The driver module allows for three-line control adjustments for speed, direction, and braking.
2. Wide Voltage Support: It supports a voltage ranging from 10-36V and has an undervoltage protection feature.
3. High Load Capacity: It can continuously load current of up to 20A (with a simple radiator attached) and can handle peak currents of up to 110A for short periods.
4. Small and Compact: The driver module has a small footprint of only 6.6cm x 3.8cm while only reaching a total height of 2.8cm with a 1cm thick radiator attached.
5. Easy Integration: It can be directly integrated with a PLC or 3.3V to 5V single-chip microcomputer IO ports and has a built-in interface level buffer feature.


Product use: En: enable power Pwml1: Positive rotation control Pwml2: reverse control GND: Power Bad Output end: VIN+: Driven Power Power Supply Input Active 10V-36V GND: Drive Board power supply input negative M+: connecting motor wires M-: Electric wire wire The following is the instructions for the use of two control methods: Level control method: En = 0 pwml1 = 0 pwml2 = 1 motor is rotating En = 0 pwml1 = 1 pwml2 = 0 motor reversal En = 0 pwml1 = 1 pwml2 = 1 motor brake En = 1 pwml1 = 1 pwml2 = 1 motor free PWM control method: En = 0 pwml1 = duty -occupying ratio PWM signal PWML2 = 1 motor is rotating (the speed adjustment can be adjusted) EN = 0 PWML1 = 1 PWML2 = The duty -occupying ratio can be adjusted PWM signal motor reversal (the speed adjustment can be adjusted) En = 0 pwml1 = 1 pwml2 = 1 motor brake En = 1 pwml1 = 1 pwml2 = 1 motor free 

Package Includes:
1x Module Board



Product Safety Information