Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single 4-pin IDE input splits into nine SATA power outputs, so you can run multiple drives from one Molex lead. The 18AWG wiring and flat parallel layout keep the run tidy and capable of carrying higher current.

Key Highlights

  • One large 4-pin IDE input feeds nine SATA outputs
  • 18AWG wire supports higher current than thin leads
  • 20cm main lead plus nine 15cm branches
  • Flat parallel cable design routes neatly through gaps
  • Black sleeving-free body blends into dark builds
  • Lightweight at around 0.08kg shipping weight

Ideal For

  • PC builders installing several SATA drives
  • Home NAS and storage server assemblers
  • Technicians bench-testing multiple drives
  • Users with spare Molex leads and few SATA plugs

Buying Tip

Count your power supply's free 4-pin IDE connectors and check the total current available on that rail before powering nine drives from one lead.

Elecvora expert review

Our verdict

A straightforward splitter that turns one Molex lead into nine SATA connections with sensible wire gauge and tidy routing. It is a practical fix for storage-heavy builds, provided your power supply has the headroom.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 18AWG conductors suit multi-drive loads
  • Flat parallel branches route cleanly
  • Generous nine-output count
  • Useful lengths for drive cages

Cons

  • Requires a free large 4-pin IDE connector
  • Total load limited by the power supply rail
  • Image may differ in output pin count shown

Best for

Storage-heavy PC builds and NAS setups with spare Molex leads

Not ideal for

Systems with no free 4-pin IDE power connector

Specifications

Wire Size (AWG)18
Cable TypeIDE 1 Input to 9 SATA  Output
ColorBlack
Cable Length20CM+(9 x 15CM)
Shipping Weight0.08 kg
Shipping Dimensions6 × 7 × 5 cm

What's in the box

  • 1 x 4-pin IDE 1-input to 9 SATA output power splitter cable

Frequently Asked Questions

How many drives can this cable power?
It provides nine SATA outputs from one 4-pin IDE input. The practical number depends on the current available from your power supply's 4-pin rail and the power draw of each drive.
What connector do I need on my power supply?
You need at least one free large 4-pin IDE (Molex) power connector. The cable does not convert from SATA or another connector type.
Does it work with SSDs as well as hard drives?
Yes, it connects to any SATA-powered device, including SSDs, hard drives and optical drives.
What do the 18AWG and length figures mean?
18AWG is the conductor gauge, thicker than thin budget leads. The main lead is 20cm and each of the nine branches is 15cm.
What is included in the package?
One 4-pin IDE 1-input to 9 SATA output power splitter cable. No other accessories are included.
How should I care for the cable?
Avoid sharp bends at the connectors, do not exceed the current capacity of your power supply rail, and keep unused branches tidy inside the case.

Overview

The Generic 4-Pin IDE to 9 SATA Power Splitter Cable solves a common problem in storage-heavy builds: not enough SATA power plugs on the power supply. It accepts one large 4-pin IDE (Molex) connection and distributes power to nine SATA devices through individual 15cm branches. The main lead measures 20cm, giving you reach from the power supply into the drive cage before the branches fan out.

Key Features

  • One input, nine outputs: a single 4-pin IDE connector feeds nine SATA power plugs.
  • 18AWG conductors: thicker wire than typical budget splitters, sized to carry higher current.
  • Flat parallel design: the branches sit flat and parallel, so they thread through cable gaps and stay orderly.
  • Practical lengths: 20cm main lead plus 9 x 15cm branches for flexible positioning.
  • Black finish: keeps the cable visually quiet inside a dark chassis.

Specifications Explained

18AWG wire refers to the conductor gauge. A lower AWG number means thicker wire, and 18AWG is a sensible choice for a splitter feeding several drives, since each branch carries only part of the total load. The 1-to-9 layout means one IDE input and nine SATA outputs, which is useful when a power supply has spare Molex leads but few SATA connectors. Lengths of 20cm for the trunk and 15cm per branch give enough slack to reach drives mounted side by side or stacked in a cage.

Compatibility and Requirements

The cable requires a free large 4-pin IDE (Molex) power connector from your power supply. It connects to SATA-powered devices such as hard drives, SSDs and optical drives. No adapters are included, and the number of drives you can power depends on the available current from your power supply's 4-pin rail.

Typical Uses

Ideal for filling a case with multiple hard drives, powering a small home storage server, running several SSDs during a build, or bench-testing drives outside a chassis where a single Molex lead is the only free connection.

What's in the Box

One 4-pin IDE 1-input to 9 SATA output power splitter cable.

Quick specs

Wire Size (AWG)
18
Cable Type
IDE 1 Input to 9 SATA  Output
Color
Black
Cable Length
20CM+(9 x 15CM)
Shipping Weight
0.08 kg
Shipping Dimensions
6 × 7 × 5 cm
See all specifications