At a glance
This battery protection module is a good fit for makers, students and electronics hobbyists. Main specs: project Min.; consuming current 12; overcharged protection voltage 4.2. Check that your power source supplies 4.2 before connecting it.
Key Highlights
- Project: Min.
- Consuming current: 12
- Overcharged protection voltage: 4.2
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Project | Min. |
|---|---|
| Consuming current | 12 |
| Overcharged protection voltage | 4.2 |
| Balanced starting voltage | 4.17 |
| Equilibrium current | 95 |
| Balanced heating power | 1.56 |
| Overcharge recovery voltage | 4.1 |
| Over-discharge protection voltage | 2.4 |
| Overvoltage protection after over-discharge protection | 2.8 |
| Overvoltage protection after over-discharge protection | 3.2 |
| Over-discharge recovery voltage | 2.9 |
| Conduction internal resistance | 2.5 |
| Overcurrent protection current C | 70 |
| Overcurrent delay time | 100 |
| Continuous operating current | 0 |
| Continuous output power | 0 |
| Ambient temperature | -40 |
Overview
The 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 14.8V 16.8V Lipo Cell Module is listed in our battery protection module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Project: Min.
- Consuming current: 12 (your supply must deliver at least this much current)
- Overcharged protection voltage: 4.2 (match this to your power supply; too high a voltage can damage the part)
- Balanced starting voltage: 4.17 (match this to your power supply; too high a voltage can damage the part)
- Equilibrium current: 95 (your supply must deliver at least this much current)
- Balanced heating power: 1.56
- Overcharge recovery voltage: 4.1 (match this to your power supply; too high a voltage can damage the part)
- Over-discharge protection voltage: 2.4 (match this to your power supply; too high a voltage can damage the part)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
1 x Battery Protection Board








Quick specs
- Project
- Min.
- Consuming current
- 12
- Overcharged protection voltage
- 4.2
- Balanced starting voltage
- 4.17
- Equilibrium current
- 95
- Balanced heating power
- 1.56








