
1 / 4 · Click to enlarge
AI Summary
This 4S-6S UBEC converts your LiPo battery voltage to a stable 12V at 3A, perfect for powering onboard electronics. Its compact, lightweight design makes it easy to install in tight drone and RC builds.
Key Highlights
- Converts 4S-6S LiPo input to regulated 12V output
- Provides up to 3A continuous current for accessories
- Compact 6 × 5 × 1 cm footprint fits tight spaces
- Weighs only 0.02 kg, adding minimal weight
- Ideal for drones, FPV, and RC models needing 12V power
- Simple two-wire input and output for easy installation
Ideal For
- FPV pilots building or upgrading 5-inch quads
- RC hobbyists needing a standalone 12V power source
- Drone builders using 4S to 6S LiPo batteries
- Modelers powering cameras and transmitters
- Anyone replacing a failed BEC in their RC setup
Buying Tip
Check that your 12V devices draw less than 3A total, and confirm your battery is 4S to 6S before connecting.
Elecvora expert review
Our verdict
This UBEC offers a straightforward solution for supplying 12V power in RC models, with a compact size and adequate current for many accessories. It is a practical choice for hobbyists who need a reliable, no-frills voltage regulator.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 4S-6S input range
- Lightweight and compact
- Simple installation
- Stable 12V output
Cons
- Requires soldering for connections
- Limited to 3A output
- No built-in connectors
Best for
RC hobbyists needing a compact 12V power supply for accessories
Not ideal for
High-current 12V devices or systems requiring more than 3A
Specifications
| Voltage Rating (V) | 12 |
|---|---|
| Rated Current (A) | 3 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 5 × 1 cm |
What's in the box
- 1 x 4S-6S 12V 3A UBEC
Frequently Asked Questions
What is the input voltage range for this UBEC?
Can I use this UBEC with a 3S battery?
What is the maximum current output?
Does the package include connectors or wires?
Is the output voltage adjustable?
How should I mount the UBEC?
Overview
The 4S-6S 12V 3A UBEC is a universal battery eliminator circuit that steps down the voltage from a 4S to 6S LiPo battery to a regulated 12V output. It is an essential component for RC enthusiasts who need to power 12V electronics—such as cameras, video transmitters, or other accessories—directly from their main flight pack when their ESC lacks a built-in BEC or when a dedicated power supply is preferred. This UBEC is lightweight and compact, making it suitable for a variety of radio-controlled models.
Key Features
- Wide input range: Works with 4S to 6S LiPo batteries, covering a broad spectrum of RC power systems.
- Stable 12V output: Provides a consistent 12V supply for your onboard electronics.
- 3A current capacity: Can deliver up to 3 amps, enough for many common 12V accessories.
- Compact and lightweight: Measures 6 × 5 × 1 cm and weighs only 0.02 kg, minimizing impact on your model's performance.
- Easy to install: Simple input and output wiring makes integration straightforward.
Specifications Explained
Voltage Rating (12V): This is the regulated output voltage. It ensures that your 12V devices receive a stable supply, regardless of the battery's state of charge (within the 4S-6S range).
Rated Current (3A): The UBEC can supply up to 3 amps continuously. This is sufficient for many FPV cameras, transmitters, and other low-to-moderate power 12V equipment. Always check the current draw of your devices to ensure they stay within this limit.
Input Voltage: The UBEC accepts input from 4S to 6S LiPo batteries (approximately 14.8V to 22.2V nominal). It is not designed for lower cell counts or higher voltages.
Compatibility and Requirements
This UBEC is compatible with 4S, 5S, and 6S LiPo batteries. It requires soldering or suitable connectors to attach the input wires to your battery or power distribution board, and the output wires to your 12V devices. Ensure that the total current draw of your connected equipment does not exceed 3A. No additional programming or configuration is needed.
Typical Uses
Common applications include powering FPV cameras and video transmitters on drones, supplying 12V accessories in RC cars and boats, and providing a reliable power source for other onboard electronics in radio-controlled models. It is particularly useful when an ESC does not have an integrated BEC or when you want to isolate your accessory power from the flight controller.
What's in the Box
Package includes: 1 x 4S-6S 12V 3A UBEC.
Quick specs
- Voltage Rating (V)
- 12
- Rated Current (A)
- 3
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 6 × 5 × 1 cm













