Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 50 cm RG1.13 coaxial pigtail with a female SMA connector on one end and an 11 mm stripping head on the other. Its thin, flexible cable makes it easy to route inside compact RF and antenna enclosures.

Key Highlights

  • Female SMA connector with threaded coupling for a secure screw-on fit
  • Stripping head termination ready for a custom solder or crimp joint
  • 50 cm of flexible RG1.13 coax for tight routing
  • Compact 11 mm connector body suits small enclosures
  • Shielded coaxial construction for RF signal paths
  • Lightweight assembly at just 0.005 kg shipping weight

Ideal For

  • Makers building compact GSM and RF antenna projects
  • Repair technicians replacing a short internal coax link
  • Hobbyists prototyping wireless modules in tight enclosures
  • RF experimenters who need a pre-made SMA end with a free termination
  • Anyone wiring a short shielded run inside a small device

Buying Tip

Confirm that your mating hardware is SMA male and that you are comfortable finishing the stripping head end yourself, since that termination is not pre-fitted with a plug.

Elecvora expert review

Our verdict

A straightforward, low-cost pigtail that solves a common problem: getting a proper SMA connection into a tight space without wrestling with thick coax. It is best treated as a component for people who can finish the stripping head themselves.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Flexible RG1.13 routes easily in small enclosures
  • Female SMA end gives a secure threaded connection
  • Short 50 cm length avoids excess cable
  • Compact 11 mm connector body
  • Very light at 0.005 kg

Cons

  • Stripping head is unterminated and needs your own joint
  • Short length limits use as an external antenna run
  • No adapters or tools included

Best for

Compact internal RF and antenna wiring where a short flexible pigtail is enough

Not ideal for

Long external antenna runs or plug-and-play setups with no soldering or crimping

Specifications

Item TypeConnector Cable
Connector TypeSMA Female to Stripping Head
Cable TypeRG1.13
Cable Length50
Connector Length (mm)11
Shipping Weight0.005 kg
Shipping Dimensions11 × 7.5 × 0.5 cm

What's in the box

  • 1 x 50CM SMA Female to Stripping Head Connector Cable 11mm RG1.13

Frequently Asked Questions

What does the stripping head end mean?
It is an unterminated end with an 11 mm connector body, so you complete the joint yourself rather than plugging it into a matching socket.
Will this fit my SMA device?
The cable has a female SMA connector, so it mates with a male SMA plug. Check your device's connector gender before ordering.
How long is the cable?
The RG1.13 cable is 50 cm long, which suits short internal runs rather than long external feeds.
Does it carry power or only RF signals?
It is a coaxial RF connector cable intended for signal paths. No voltage or power rating is specified for this item.
What is included in the package?
You receive one 50 cm SMA female to stripping head connector cable with an 11 mm connector. Nothing else is included.
How should I care for the cable?
Avoid sharp bends and pulling on the connector bodies, keep the SMA threads clean, and secure the cable so movement does not stress the joints.

Overview

This connector cable is a short RF coaxial pigtail built around 50 cm of RG1.13 cable. One end carries a female SMA connector with a central receptacle and an externally threaded barrel, giving the familiar screw-on coupling used across sub-miniature RF work. The other end is a stripping head with an 11 mm connector length, leaving a prepared termination point for your own joint.

Because RG1.13 is a thin, flexible coax, the assembly is easy to bend and route through crowded enclosures, around standoffs and behind panels. That makes it a practical choice when you need a shielded link between an antenna port and a board or between two RF sections in a small build.

Key Features

  • Female SMA interface: threaded coupling with a central receptacle for a stable, repeatable screw-on connection.
  • Stripping head end: an 11 mm termination that lets you finish the joint to suit your own layout.
  • RG1.13 cable: a slim, flexible coaxial type that takes tight bends more easily than thicker cable.
  • 50 cm length: enough reach for internal wiring without a large coil of excess cable.
  • Shielded construction: coaxial design helps keep the RF path contained.
  • Light and compact: the whole assembly ships at just 0.005 kg.

Specifications Explained

Connector type tells you how the cable mates. The female SMA end accepts a male SMA plug, and the stripping head is the end you prepare yourself. Check both ends against your existing hardware before ordering.

Cable type and length matter for routing and loss. RG1.13 is a small-diameter coax, so it fits where larger cable will not, and 50 cm is a short internal run rather than a long external feed.

Connector length of 11 mm describes the connector body size, which is useful when you are working close to a panel or board and need to know how far the fitting will protrude.

Compatibility and Requirements

The SMA female end requires a mating SMA male connector. The stripping head is unterminated, so you will need to complete that joint yourself using the method and hardware appropriate to your project. No adapters, tools or additional fittings are included beyond the cable itself.

Typical Uses

This pigtail suits GSM and RF antenna work, small wireless modules, prototyping, repair jobs and internal enclosure wiring where a short shielded link is needed. It is also handy for makers building compact RF assemblies who want a pre-made SMA end and a free end for a custom connection.

What's in the Box

One 50 cm SMA female to stripping head connector cable with an 11 mm connector on RG1.13 cable.

Connector Length and Cable Length

Quick specs

Item Type
Connector Cable
Connector Type
SMA Female to Stripping Head
Cable Type
RG1.13
Cable Length
50
Connector Length (mm)
11
Shipping Weight
0.005 kg
See all specifications