
1 / 5 · Click to enlarge
AI Summary
A 5mm white photoresistor whose resistance falls from over 200MOhm in darkness to under 2.4kOhm in light. It gives a simple, reliable light-sensing signal for divider circuits, automatic lamps, and light-activated switches.
Key Highlights
- 5mm diameter photoresistor for compact light-sensing builds
- Dark resistance above 200MOhm for clear low-light distinction
- Light resistance below 2.4kOhm for strong light response
- High sensitivity across a wide resistance range
- Two-terminal passive component for simple divider circuits
- White body colour for easy identification on a board
Ideal For
- Students learning about sensors and voltage dividers
- Makers building automatic night lights
- Electronics hobbyists prototyping light switches
- Arduino and microcontroller beginners adding light sensing
- Repair and replacement work on simple light-sensing circuits
Buying Tip
Check that your circuit uses a fixed resistor matched to the 2.4kOhm light resistance so the divider output swings enough for your comparator or microcontroller input.
Elecvora expert review
Our verdict
A dependable, low-cost photoresistor with a wide resistance swing that suits learning projects and simple automatic lighting. It is not a precision light meter, but it does its job well in basic sensing circuits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide dark-to-light resistance change
- Standard 5mm size fits breadboards
- Simple two-terminal wiring
- High sensitivity to ambient light changes
- Affordable for classroom and hobby use
Cons
- Requires an external fixed resistor for a usable signal
- Not a calibrated or precision light sensor
- Response depends on placement and ambient conditions
Best for
Beginners and hobbyists building light-activated switches and sensor demos
Not ideal for
Applications needing calibrated, precision light measurement
Specifications
| Manufacturer | Generic |
|---|---|
| Dark Resistance | >200MOhm |
| Light Resistance | <2.4kOhm |
| Diameter (mm) | 5 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 5800B Light Dependent Resistor (LDR) White Color
Frequently Asked Questions
How do I connect the 5800B LDR to a circuit?
Does the LDR have polarity?
What supply voltage can I use?
What is included with the product?
How should I care for the LDR?
Why does the resistance change when I cover it?
Overview
The Generic 5800B is a light-dependent resistor, also called a photoresistor or photo-conductive cell. It is a passive component with two leads, and its resistance changes with the amount of light falling on its sensing surface. The 5800B is supplied in a white body with a 5mm diameter, making it compact enough for breadboards, perfboard builds, and small enclosures.
Because the resistance range is wide, the device is easy to work with. In complete darkness it measures above 200MOhm, and under bright light it falls below 2.4kOhm. That large change gives a clear, measurable signal without complicated circuitry.
Key Features
- Light-controlled resistance: resistance decreases as incident light intensity increases.
- Wide sensing range: above 200MOhm in the dark and below 2.4kOhm in light.
- 5mm diameter: a common size that fits standard prototyping layouts.
- High sensitivity: responds noticeably to changes in ambient light.
- Simple wiring: two terminals, no polarity concerns in typical use.
Specifications Explained
Dark resistance: above 200MOhm
This figure describes the resistance when no meaningful light reaches the sensor. A high dark resistance means the component draws very little current in the dark, which helps keep divider circuits predictable and reduces false triggering from low-level leakage.
Light resistance: below 2.4kOhm
Under illumination the resistance drops below 2.4kOhm. The gap between the dark and light values is what makes the LDR useful: a fixed resistor paired with the LDR forms a voltage divider whose output changes clearly between dark and light conditions.
Diameter: 5mm
The 5mm body is a standard photoresistor size. It fits common breadboard spacing and small project enclosures, and the sensing face can be aimed at a window, lamp, or LED without much space.
Compatibility and Requirements
The 5800B is a passive resistive component, so it does not require a supply voltage of its own. To use it, pair it with a fixed resistor in a voltage divider and feed the resulting voltage to a comparator, transistor, or microcontroller analog input. The exact resistor value depends on your circuit and the light levels you want to detect.
Typical Uses
- Automatic night lights and lamp switching
- Light-level sensing for microcontroller projects
- Simple light-activated alarms and buzzers
- Educational demonstrations of photoconductivity
- Breadboard experiments with voltage dividers
What's in the Box
One 5800B Light Dependent Resistor (LDR) in white colour.
Quick specs
- Manufacturer
- Generic
- Dark Resistance
- >200MOhm
- Light Resistance
- <2.4kOhm
- Diameter (mm)
- 5
- Shipping Weight
- 0.001 kg
- Shipping Dimensions
- 1 × 1 × 1 cm













