
1 / 3 · Click to enlarge
AI Summary
A compact 6-pin rotary dial switch with 2.54mm pin pitch and through-hole mounting for PCB settings and mode selection. Its flat 17 x 9.8 x 6.5mm body fits crowded boards while the dial makes option changes quick.
Key Highlights
- Six pins on a standard 2.54mm pitch for PCB layouts
- Flat low-profile body at roughly 17 x 9.8 x 6.5mm
- Through-hole mounting for secure board placement
- 0.15A operating current for low-power circuits
- Works across -40 to 85 °C environments
- Approximately 2000 mechanical and electrical operations
Ideal For
- Makers building compact PCB prototypes
- Electronics repair technicians replacing board switches
- Product designers needing a low-profile selector
- Hobbyists adding mode or address settings to a circuit
- Students learning through-hole component assembly
Buying Tip
Confirm your board holes are laid out at 2.54mm spacing and that your circuit current stays within 0.15A before ordering.
Elecvora expert review
Our verdict
A practical low-profile selector for boards that need occasional setting changes without a bulky control. Its standard pitch and compact body make it easy to plan into through-hole layouts.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard 2.54mm pitch simplifies PCB layout
- Flat 6.5mm height suits tight enclosures
- Wide -40 to 85 °C operating range
- Lightweight at under 1g
Cons
- 0.15A rating limits it to low-power circuits
- Approximately 2000 operations suits occasional rather than frequent switching
- Requires soldering for installation
Best for
Compact through-hole boards needing a mode or option selector
Not ideal for
High-current switching or controls adjusted many times daily
Specifications
| Manufacturer | Generic |
|---|---|
| Model No. / Name | 6 Pin Flat Dial Switch 2.54mm |
| Operating Current (A) | 0.15 |
| No. of Pins | 6 |
| Pin Spacing (mm) | 2.54 |
| Mounting Type | Through Hole |
| Operating Temperature (°C) | -40 to 85 |
| Mech. Electrical Lifecycle | ≈ 2000 |
| Length (mm) | 17 |
| Width (mm) | 9.8 |
| Height (mm) | 6.5 |
| Weight (g) | <1 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 6 Pin Flat Dial Switch 2.54mm
Frequently Asked Questions
What is the pin pitch of this switch?
How much current can it handle?
How is it mounted?
What temperature range does it support?
How many operations is it rated for?
What is included with the switch?
Overview
The Generic 6 Pin Flat Dial Switch 2.54mm is a rotary selector designed for through-hole mounting on printed circuit boards. Instead of a tall toggle or slide control, it uses a flat dial that lets you choose between circuit options while keeping the component low to the board. The body measures about 17mm in length, 9.8mm in width and 6.5mm in height, so it suits enclosures and layouts where vertical clearance is tight.
Six pins spaced at 2.54mm connect the switch to the rest of the circuit. That pitch is common in prototyping boards and many production PCBs, which simplifies planning the footprint. Each unit weighs under a gram, so it adds almost nothing to the finished assembly.
Key Features
- Dial selection: a flat rotary dial for choosing between settings or options.
- 2.54mm pin pitch: matches common through-hole board spacing.
- Compact footprint: 17 x 9.8 x 6.5mm body for space-limited designs.
- Six-pin connection: provides a stable link to the surrounding circuit.
- Wide temperature range: rated from -40 to 85 °C.
Specifications Explained
Operating current: the 0.15A rating tells you this switch is intended for low-power signal and control paths rather than high-current loads. Check that your circuit stays within that figure.
Pin spacing: the 2.54mm pitch is the distance between adjacent pins. Use it to lay out plated holes that match the switch and to confirm it will fit your board or prototype area.
Lifecycle: the approximate 2000 mechanical and electrical operations figure is a guide to expected service. It suits settings that are adjusted occasionally, such as configuration or mode selection, rather than controls cycled many times per day.
Temperature: operation from -40 to 85 °C covers many indoor and sheltered electronic environments. Keep the part within that range for reliable behaviour.
Compatibility and Requirements
The switch is a through-hole component, so it needs a board with matching holes at 2.54mm spacing and enough clearance for a 17 x 9.8 x 6.5mm body. Plan your circuit around the 0.15A operating current. No other accessories are supplied, so soldering equipment and a suitable PCB are required to install it.
Typical Uses
Use the dial to select modes, addresses or configuration options on control boards. It also works well in small gadgets, test fixtures, hobby electronics and repair work where a compact selector is needed and space is limited.
What's in the Box
- 1 x 6 Pin Flat Dial Switch 2.54mm
Quick specs
- Manufacturer
- Generic
- Model No. / Name
- 6 Pin Flat Dial Switch 2.54mm
- Operating Current (A)
- 0.15
- No. of Pins
- 6
- Pin Spacing (mm)
- 2.54
- Mounting Type
- Through Hole













