Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 6x6x5mm momentary tactile switch features through-hole mounting, IP65 protection, and a 12V/50mA rating for reliable PCB and breadboard use. It provides a crisp tactile response with a 1.56N operating force and 50,000-cycle lifespan.

Key Highlights

  • Compact 6x6x5mm through-hole momentary switch
  • IP65 rated for dust and water resistance
  • 12V DC, 50mA maximum operating current
  • Brass contacts with 50mΩ contact resistance
  • 1.56N operating force for clear tactile feedback
  • Approximately 50,000 mechanical cycles

Ideal For

  • Electronics hobbyists building breadboard prototypes
  • PCB designers needing compact momentary switches
  • Makers creating custom control panels
  • Engineering students learning circuit design
  • Product developers testing user interfaces

Buying Tip

Verify the 12V/50mA rating matches your circuit, and consider the 1.56N operating force for your intended tactile feel.

Elecvora expert review

Our verdict

This tactile switch offers a solid balance of compact size, environmental protection, and tactile feel for low-power electronics. Its IP65 rating and brass contacts make it a dependable choice for prototypes and finished products alike.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • IP65 protection against dust and water jets
  • Clear tactile feedback with 1.56N force
  • Low contact resistance for reliable signals
  • Through-hole design for secure mounting

Cons

  • Not suitable for high-current applications
  • Requires soldering for permanent installation
  • Package contents not specified

Best for

Low-voltage electronic projects needing a durable, sealed momentary switch

Not ideal for

Switching mains voltage or high-power loads

Specifications

ManufacturerGeneric
Operating Voltage (VDC)12
Max. Operating Current (A)50mA
On/Off FunctionPush to ON
Switch TypeMomentary
Contact TypeThrough-hole
Contact MaterialBrass
Contact Resistance (ohm)50mΩ
Insulation Resistance (MOhm)100
Operating Temperature (°C)-20 to 70°C
Operation Force1.56 +/- 0.5 N
Operation Stroke0.25+0.2/-0.1mm
Body MaterialPlastic
Mech. Electrical Lifecycle≈ 50000
Protection StandardIP65
Length (mm)12
Width (mm)12
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What is the maximum voltage and current this switch can handle?
The switch is rated for 12V DC and 50mA maximum operating current. Do not exceed these limits to avoid damage.
Can this switch be used on a breadboard?
Yes, the through-hole pins are compatible with standard solderless breadboards for temporary prototyping.
Is the switch waterproof?
It has an IP65 rating, meaning it is protected against dust and water jets, but it should not be submerged in water.
How many switches are included in the package?
The package contents are not specified by the manufacturer. Please check the product listing or packaging for quantity.
What is the operating temperature range?
The switch operates between -20°C and 70°C, suitable for most indoor and protected outdoor environments.
What is the mechanical life of this switch?
The switch is rated for approximately 50,000 mechanical cycles under normal use.

Overview

The 6x6x5mm Tactile Push Button Switch is a momentary, through-hole component built for reliable input in electronic circuits. It is commonly used on printed circuit boards (PCBs) and can also be inserted into solderless breadboards for temporary prototyping. The switch is normally open and closes the circuit only while pressed, making it ideal for reset buttons, menu navigation, and control inputs.

Key Features

  • Momentary action: Push-to-ON operation with a clear tactile click.
  • Through-hole contact: Secure PCB mounting with easy soldering.
  • IP65 protection: Resists dust and water jets for use in demanding environments.
  • Brass contacts: Low contact resistance of 50mΩ for efficient signal transfer.
  • Compact size: 6x6x5mm body fits tight spaces.

Specifications Explained

The 12V DC rating and 50mA maximum current make this switch suitable for low-power signal switching, not for direct control of high-current loads. The momentary contact type means the switch stays closed only while the actuator is pressed, which is standard for tactile feedback buttons. With an operating force of 1.56N ±0.5N and a stroke of 0.25mm, the switch provides a firm, responsive feel that helps prevent accidental activation. The brass contacts and 50mΩ contact resistance ensure minimal voltage drop, while the 100MΩ insulation resistance supports safe isolation. The IP65 rating indicates protection against dust ingress and water jets, though it is not intended for submersion. The mechanical lifecycle of approximately 50,000 operations offers long-term reliability in typical use.

Compatibility and Requirements

This switch is designed for through-hole PCB mounting and is also compatible with standard solderless breadboards. It requires a 12V DC supply or lower for operation and draws a maximum of 50mA. No additional driver circuitry is needed for basic switching, but ensure your circuit does not exceed the rated voltage and current. The operating temperature range of -20°C to 70°C suits most indoor and protected outdoor applications.

Typical Uses

Common applications include reset buttons on development boards, user input in consumer electronics, control panels for instrumentation, and prototype circuits on breadboards. The IP65 rating also makes it suitable for use in environments where dust or occasional water exposure is a concern, such as outdoor enclosures or industrial equipment.

What's in the Box

Package contents are not specified by the manufacturer. Please check the product packaging or contact the seller for details.

Quick specs

Manufacturer
Generic
Operating Voltage (VDC)
12
Max. Operating Current (A)
50mA
On/Off Function
Push to ON
Switch Type
Momentary
Contact Type
Through-hole
See all specifications