Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 8x10mm through-hole power inductor rated 4.7mH at 0.8A with 10% tolerance. Its magnetically shielded construction and low 0.24Ω DCR make it a practical choice for DC/DC converter and filter designs.

Key Highlights

  • 4.7mH inductance with ±10% tolerance for predictable filtering
  • 0.8A current rating suits low-to-medium power rails
  • Through-hole DIP mounting for secure, serviceable joints
  • Low 0.24Ω DC resistance helps reduce I²R losses
  • Magnetically shielded to limit flux leakage
  • Operates from -40°C to 85°C in demanding environments

Ideal For

  • Electronics hobbyists building through-hole power supplies
  • Repair technicians replacing failed chokes on motherboards
  • Design engineers prototyping DC/DC converters
  • Students learning about inductive filtering
  • Makers needing a magnetically shielded inductor for compact builds

Buying Tip

Check that your circuit’s continuous current stays at or below 0.8A and that the 11 x 9mm footprint fits your board before ordering.

Elecvora expert review

Our verdict

A solid, no-frills through-hole inductor that delivers a useful 4.7mH value at a modest 0.8A rating. Its shielded construction and low DCR make it a sensible choice for compact power filtering where space is tight.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 4.7mH inductance in a small 8x10mm body
  • Magnetically shielded to reduce flux leakage
  • Low 0.24Ω DC resistance for reduced losses
  • Wide -40 to 85°C operating range
  • Through-hole mounting for strong, repairable joints

Cons

  • 0.8A rating limits use to lower-power circuits
  • Through-hole only, not suitable for SMD-only boards
  • No datasheet or tolerance curve included

Best for

Through-hole power filtering and DC/DC converter projects

Not ideal for

High-current or surface-mount-only designs

Specifications

Inductance4.7mH
Tolerance (%)10
Mounting TypeThrough Hole
Current Rating (A)0.8
Frequency (Hz)1000
Operating Temperature (°C)-40 to 85
Length (mm)11
Width (mm)9
Weight (g)1 (approx) (each)
DC Resistance(mΩ)0.24
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 8x10mm 4.7mH DIP Power Inductor

Frequently Asked Questions

What is the inductance and current rating of this inductor?
It has a 4.7mH inductance with ±10% tolerance and a current rating of 0.8A.
Is this a through-hole or surface-mount component?
It is a through-hole (DIP) component, so it requires a board with matching holes and soldering.
What is the DC resistance of this inductor?
The DC resistance is 0.24Ω, which helps keep resistive losses low at the rated current.
What operating temperature range does it support?
It is rated for operation from -40°C to 85°C.
What are the dimensions and weight?
The body measures approximately 11mm long and 9mm wide (8x10mm nominal), and each unit weighs about 1g.
What is included in the package?
The package includes one 8x10mm 4.7mH DIP power inductor.

Overview

The Generic 8x10mm 4.7mH DIP Power Inductor is a wire-wound choke coil built for through-hole mounting. It combines a 4.7mH inductance value with a 0.8A current rating, making it a practical component for filtering and energy storage in power circuits. The 10% tolerance and 0.24Ω DC resistance give designers a predictable part for repeatable builds, while the compact 11 x 9mm body fits crowded boards. Magnetically shielded construction helps contain flux leakage, which is useful when components sit close together.

Key Features

  • 4.7mH inductance: Suited to low-frequency filtering and choke applications.
  • 0.8A current rating: Handles typical low-to-medium power rails.
  • Through-hole DIP mounting: Strong mechanical joints for prototypes and repairs.
  • 10% tolerance: Consistent performance across batches.
  • Low DC resistance: 0.24Ω helps minimise resistive losses.
  • Magnetically shielded: Limits interaction with nearby components.
  • Wide temperature range: Stable from -40°C to 85°C.

Specifications Explained

Inductance (4.7mH): This is a relatively high value for a compact power inductor, making it useful for filtering lower-frequency ripple and for differential-mode choke duties. Tolerance (±10%): The actual inductance will fall within a narrow band, so circuit behaviour stays close to your calculations. Current rating (0.8A): Keep continuous current at or below this level to avoid saturation and overheating. DC resistance (0.24Ω): Lower resistance means less voltage drop and heat at the rated current. Frequency (1000Hz): The stated test frequency gives a reference point for comparing inductance measurements. Operating temperature (-40 to 85°C): Covers most indoor and sheltered outdoor electronics. Dimensions (11 x 9mm): The 8x10mm nominal body fits standard through-hole layouts.

Compatibility and Requirements

This inductor is a through-hole component, so it requires a PCB or perfboard with matching holes and soldering equipment for installation. It is not a surface-mount part. Ensure your circuit’s continuous current does not exceed 0.8A and that the operating temperature stays within -40 to 85°C. No other accessories are required for basic use.

Typical Uses

  • DC/DC converters in distributed power systems
  • Voltage regulator module (VRM) circuits
  • Motherboards for laptop and desktop computers
  • General-purpose filtering and choke applications
  • Differential-mode noise suppression

What's in the Box

1 x 8x10mm 4.7mH DIP Power Inductor.

Quick specs

Inductance
4.7mH
Tolerance (%)
10
Mounting Type
Through Hole
Current Rating (A)
0.8
Frequency (Hz)
1000
Operating Temperature (°C)
-40 to 85
See all specifications