Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 80W DC-DC buck-boost module that takes 10-35V in and delivers an adjustable 1-35V output with constant current up to 8.5A. It automatically steps voltage up or down to keep your project's supply stable.

Key Highlights

  • Automatic buck-boost conversion keeps output stable across the 10-35V input range
  • Adjustable output from 1V to 35V for flexible project power
  • Constant current operation up to 8.5A for charging and load control
  • Up to 80W output with 90.5% maximum conversion efficiency
  • Low ripple output suits sensitive electronics and lab work
  • Compact 65 x 46mm board weighing just 69g

Ideal For

  • Makers building adjustable DIY bench power supplies
  • Electronics students prototyping embedded systems
  • Technicians testing circuits that need current limiting
  • Hobbyists assembling battery charging setups
  • Lab users powering sensitive low-voltage electronics

Buying Tip

Check that your load's voltage and current fall inside the 1-35V and 8.5A limits, and remember that 80W is the ceiling, so higher output voltages leave less current available.

Elecvora expert review

Our verdict

A tidy, versatile buck-boost module that covers a wide voltage span and adds constant current control in a very small footprint. It suits builders who understand power limits and want one board instead of separate step-up and step-down units.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Automatic buck-boost operation across a wide 10-35V input range
  • Adjustable 1-35V output with constant current up to 8.5A
  • High 90.5% peak efficiency and low ripple output
  • Compact 65 x 46mm board at only 69g

Cons

  • Requires a separate DC input source within 10-35V
  • No AC mains input despite the category label
  • Output current must be derated as voltage rises toward the 80W limit

Best for

Makers and technicians needing adjustable, current-limited DC power in a small build

Not ideal for

Users wanting a plug-in mains AC power supply

Specifications

Item TypeConstant Current Power Supply Module)
Input VoltageDC 10 – 35 V
Output VoltageDC 1 – 35 V Adjustable
Max Output Current (mA)8500
Max Power Output (W)80 W
Conversion efficiency90.5% Max
Length (mm)65
Width (mm)46
Weight (g)69
Sensor TypeStrain Gauge Based Load Cell
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.073 kg
Shipping Dimensions18 × 12 × 5 cm

What's in the box

  • 1 x 80W DC 10-35V to 1-35V Automatic Voltage Up and Down Voltage Stabilized Constant Current Power Supply Module
  • 1 x Fitting Accessory Set

Frequently Asked Questions

What input voltage does this module need?
It requires a DC input between 10V and 35V. It is a DC-DC converter, so it does not connect directly to mains AC.
What output range can I set?
The output is adjustable from 1V to 35V, and the module automatically steps the voltage up or down to maintain it.
How much current can it deliver?
Constant current operation is supported up to 8.5A, within the 80W maximum output power. Higher output voltages reduce the current available.
What is included with the module?
You receive the 80W DC 10-35V to 1-35V power supply module and a fitting accessory set for mounting.
Is it suitable for sensitive electronics?
The module is specified with low ripple output and fast dynamic response, which helps with sensitive circuits when operated within its ratings.
How should I keep it cool?
The module is rated for 80W under natural cooling, so mount it with airflow around the board and avoid enclosing it tightly.

Overview

This 80W DC-DC power supply module is built for projects that need a steady, adjustable supply from a varying input. It accepts DC 10-35V and produces an output you can set anywhere from 1V to 35V. Because the module automatically steps the voltage up or down, you do not have to choose between a buck converter and a boost converter for a single build.

Constant current operation up to 8.5A makes it useful wherever current limiting matters, such as charging setups and load testing. The board measures 65mm by 46mm and weighs 69g, so it fits into tight enclosures and prototyping layouts.

Key Features

  • Automatic buck-boost conversion: maintains a stable output whether the input sits above or below your target voltage.
  • Wide adjustable output: 1V to 35V range covers many low-voltage electronics tasks.
  • Constant current up to 8.5A: supports current-regulated charging and load work.
  • 80W maximum output: enough headroom for moderately demanding projects under natural cooling.
  • 90.5% peak efficiency: reduces wasted heat during conversion.
  • Low ripple output: helps keep sensitive circuits performing predictably.

Specifications Explained

Input voltage (DC 10-35V) defines the supply you connect to the module; stay inside this window for reliable operation. Output voltage (1-35V adjustable) is set by you, and the module handles the step-up or step-down work automatically.

Maximum output current of 8500mA and 80W maximum power are related limits: as output voltage rises, the current you can draw within the 80W ceiling falls. Plan your load so neither limit is exceeded. Peak efficiency of 90.5% means most of the input power reaches your load, and low ripple keeps the output clean for sensitive devices.

Compatibility and Requirements

The module requires a DC input source within 10-35V; it is not a mains AC input device despite its category listing. Your load must stay within the 1-35V output range, the 8.5A current limit and the 80W power ceiling. Cooling is by natural convection, so allow airflow around the board. A fitting accessory set is supplied for mounting.

Typical Uses

  • DIY bench and project power supplies
  • Battery charging arrangements needing current control
  • Embedded systems and prototyping boards
  • Laboratory and test setups with sensitive electronics
  • General power management and voltage regulation tasks

What's in the Box

  • 1 x 80W DC 10-35V to 1-35V automatic voltage up/down constant current power supply module
  • 1 x fitting accessory set

Quick specs

Item Type
Constant Current Power Supply Module)
Input Voltage
DC 10 – 35 V
Output Voltage
DC 1 – 35 V Adjustable
Max Output Current (mA)
8500
Max Power Output (W)
80 W
Conversion efficiency
90.5% Max
See all specifications