Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
9 Layers Acrylic Box Shell Case with Cooling Fan for Raspberry pi 3(Black) — image 1
Hover to zoom

1 / 6 · Click to enlarge

9 Layers Acrylic Box Shell Case with Cooling Fan for Raspberry pi 3(Black)

5.01 rating
AI Summary
Raspberry Pi & Orange Pi for everyday users

The 9 Layers Acrylic Box Shell Case with Cooling Fan for Raspberry pi 3(Black) is a mid-range raspberry pi & orange pi designed for everyday users. It features Model: C0363 and Material: Plastic , Acrylic.

₹1,681
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,681
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model: C0363
Material: Plastic , Acrylic
Size: 10x6.8x3.7cm
Weight: 70g
Rated Voltage: DC 5V (Fan)
Current: 0.2A (Fan)

Ideal For

Everyday convenience
Share:
SKU: S-DIY0203BCategory: Raspberry Pi & Orange Pi

About This Product

The 9 Layers Acrylic Box Shell Case with Cooling Fan for Raspberry pi 3(Black) is a mid-range raspberry pi & orange pi designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model: C0363
  • Material: Plastic , Acrylic — built to last with a quality finish
  • Size: 10x6.8x3.7cm
  • Weight: 70g
  • Rated Voltage: DC 5V (Fan) — works with standard household power
  • Current: 0.2A (Fan)
  • Package Contents: 1 x Cooling Fan 1 x Screws Parts 1 x Acrylic case
  • One Package Weight: 0.10kgs / 0.22lb

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. This case is specifically designed for Raspberry pi 3. 2. The shell is made up of 9 layers acrylic boards and has different ports and button position. 3. It have many ventilation ports in side and covering, good heat dispersion. 4. Special design to install a cooling fan. 5. The cooling fan helps to exhaust the hot air from inside the device case. Improve air flow in your system. Cool down the entire case. Extend your system life span and make the device work better.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.