
1 / 3 · Click to enlarge
AI Summary
A compact MCP9600-based thermocouple-to-digital converter board with cold junction compensation and I2C output. It reads eight thermocouple types and runs from 2.7 V to 5.5 V.
Key Highlights
- MCP9600 converter with integrated cold junction compensation
- Supports K, J, T, N, S, E, B and R thermocouple types
- 0.0625 °C resolution with ±1.5 °C maximum error
- I2C interface supports up to eight devices per bus
- Adjustable digital filtering and four programmable temperature alarms
- Wide 2.7 V to 5.5 V supply in a 40 × 25 mm board
Ideal For
- Makers building I2C-based temperature sensing projects
- Laboratory technicians measuring with supported thermocouple probes
- Embedded engineers adding thermocouple input to a controller
- Students learning thermocouple-to-digital conversion
- Industrial maintenance teams monitoring process temperatures
Buying Tip
Check that your thermocouple type and connector match the module before ordering, and plan for soldering the supplied header pins.
Elecvora expert review
Our verdict
A tidy, purpose-built converter board that removes the analogue design work from thermocouple measurement. It is a sensible choice for I2C-based projects that need a supported thermocouple type and a compact footprint.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated cold junction compensation saves design effort
- Eight thermocouple types in one board
- Fine 0.0625 °C resolution
- Filtering, alarms and low-power modes add flexibility
- Small 40 × 25 mm board with a wide supply range
Cons
- Header pins require soldering before use
- ±1.5 °C maximum error limits precision work
- Thermocouple and host controller are not included
Best for
Embedded and laboratory temperature sensing over I2C
Not ideal for
Users needing a plug-and-play USB thermometer
Specifications
| Item Type | Thermocouple Converter |
|---|---|
| Model No. / Name | CJMCU-96 MCP9600 |
| Operating Voltage | 2.7 V to 5.5 V |
| Operating Range | –40 °C to +125 °C |
| Length (mm) | 40 |
| Width (mm) | 25 |
| Weight (g) | 07 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
What's in the box
- 1 × CJMCU-96 MCP9600 thermocouple converter module
- 1 × header pins
- 1 × thermocouple connector
- 1 × accessory
Frequently Asked Questions
Which thermocouple types does this module support?
What supply voltage does the board need?
How do I connect it to a microcontroller?
Is the thermocouple included?
Does it need soldering?
What accuracy can I expect?
Overview
The CJMCU-96 MCP9600 module is a fully integrated thermocouple-to-digital converter built around the MCP9600. Instead of amplifying and linearising a thermocouple signal with a discrete circuit, you connect the thermocouple and read a digital temperature value over I2C. Cold junction compensation is handled on board, so the module accounts for the temperature at its own terminals when calculating the result.
Key Features
- Eight thermocouple types: K, J, T, N, S, E, B and R, referenced to NIST ITS-90.
- Cold junction compensation integrated on the module.
- 0.0625 °C resolution with a maximum error of ±1.5 °C.
- Four programmable temperature alarms for threshold-based monitoring.
- Adjustable digital filtering to reduce noise on the reading.
- Low-power modes for battery-conscious designs.
- I2C interface supporting up to eight devices on one bus at 100 kHz.
Specifications Explained
The 2.7 V to 5.5 V supply range lets the board share a bus with common 3.3 V and 5 V logic systems without a separate regulator stage. The stated operating range of –40 °C to +125 °C refers to the module itself; the measurable thermocouple range depends on the thermocouple type in use. Resolution of 0.0625 °C gives fine-grained readings, while the ±1.5 °C maximum error figure sets realistic expectations for absolute accuracy. With up to eight devices per I2C bus, several modules can share one controller for multi-point sensing.
Compatibility and Requirements
You need a host microcontroller with an I2C bus and a suitable thermocouple with a mating connector. The module is supplied with header pins and a thermocouple connector, so some soldering is required before first use. Power the board within the 2.7 V to 5.5 V range and confirm that the I2C address arrangement suits your bus if you plan to run more than one module.
Typical Uses
- Embedded temperature monitoring in prototype and test rigs
- Laboratory measurement setups using K-type or other supported probes
- Industrial sensing where a digital I2C reading is preferred
- Multi-point temperature logging with several modules on one bus
What's in the Box
- 1 × CJMCU-96 MCP9600 thermocouple converter module
- 1 × header pins
- 1 × thermocouple connector
- 1 × accessory
Quick specs
- Item Type
- Thermocouple Converter
- Model No. / Name
- CJMCU-96 MCP9600
- Operating Voltage
- 2.7 V to 5.5 V
- Operating Range
- –40 °C to +125 °C
- Length (mm)
- 40
- Width (mm)
- 25













