Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 3-pole AC contactor with a 220V AC coil, 9A rated current and 1NO+1NC auxiliary contacts. It gives you reliable electromagnetic switching for motor starters, control panels and machinery loads.

Key Highlights

  • 220V AC electromagnetic coil for direct control-circuit switching
  • 9A rated operational current across three normally open main poles
  • 1NO + 1NC auxiliary contacts for signalling and interlocking
  • 690V AC rated insulation voltage with 50/60Hz operation
  • DIN rail or panel mounting for flexible panel installation
  • Works with thermal overload relays and CJX2-series accessories

Ideal For

  • Panel builders assembling motor starter circuits
  • Maintenance technicians replacing contactors in machinery
  • Factory automation integrators wiring control cabinets
  • HVAC service engineers working on equipment controls
  • Electronics hobbyists building higher-power AC switching projects

Buying Tip

Check that your control circuit supplies 220V AC to the coil and that your load current stays within the 9A main contact rating before ordering.

Elecvora expert review

Our verdict

A sensible, no-frills contactor for small three-phase loads and control panels, with the auxiliary contacts and DIN rail mounting that most installers expect. It does one job cleanly and pairs easily with overload relays.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 220V AC coil matches common control circuits
  • Three main poles plus 1NO/1NC auxiliary contacts
  • DIN rail or panel mounting simplifies installation
  • Compatible with thermal overload relays and CJX2 accessories

Cons

  • Coil is fixed at 220V AC, so other control voltages need a different model
  • 9A rating limits it to smaller motors and loads
  • No mounting hardware or documentation is listed in the package

Best for

Small motor starters and control panels running on a 220V AC control supply

Not ideal for

High-current motor circuits or control systems using a different coil voltage

Specifications

Shipping Weight0.35 kg
Shipping Dimensions8 × 8 × 5 cm

What's in the box

  • 1 x AC Contactor CJX2-0911 Silver Alloy Point 220V

Frequently Asked Questions

What voltage does the coil need?
The coil is rated for 220V AC and operates at 50/60Hz. Confirm your control circuit matches this before wiring.
How much current can the main contacts handle?
The rated operational current is 9A across the three main poles. Keep your load within this figure.
What auxiliary contacts are included?
The contactor provides one normally open and one normally closed auxiliary contact (1NO + 1NC).
Can I mount it on DIN rail?
Yes, the unit supports DIN rail or panel mounting for flexible installation in control cabinets.
Does it work with overload relays?
It is compatible with thermal overload relays and other CJX2-series accessories, which can be added for motor protection.
What is included in the package?
The package contains one AC Contactor CJX2-0911 Silver Alloy Point 220V.

Overview

The CJX2-0911 is a three-phase AC magnetic contactor designed to switch motors and other industrial electrical loads. It uses a 220V AC coil to pull in three normally open main contacts rated at 9A, alongside a 1NO + 1NC auxiliary contact block. The result is a compact switching device that fits neatly into automation panels, motor starters and machinery control circuits.

With a rated insulation voltage of 690V AC and operation at 50/60Hz, the contactor covers a broad set of low-voltage control tasks. It mounts on DIN rail or directly to a panel, and it is compatible with thermal overload relays and other CJX2-series accessories.

Key Features

  • 220V AC coil: energises from a standard control-circuit supply for straightforward wiring.
  • 9A main contacts: three normally open poles handle motor and load switching.
  • Auxiliary contacts: one normally open and one normally closed contact for status signals, latching or interlocking.
  • Electromagnetic operation: a proven, simple switching principle with no complex setup.
  • Flexible mounting: DIN rail or panel fixing keeps installation quick.
  • Accessory-ready: pairs with thermal overload relays and CJX2-series add-ons.

Specifications Explained

Coil voltage (220V AC) is the voltage you apply to the coil terminals to close the main contacts. Match it to your control circuit before wiring.

Rated operational current (9A) describes the load current the main contacts are intended to carry. Confirm your motor or load current sits within this rating.

Three main poles (3NO) suit three-phase loads, while the 1NO + 1NC auxiliary pair gives you a separate contact for feedback or control logic.

Rated insulation voltage (690V AC) indicates the insulation level of the device, and the -5°C to +60°C operating range covers most indoor panel environments.

Compatibility and Requirements

The contactor is designed for 220V AC coil circuits and 50/60Hz supplies. It is compatible with thermal overload relays and other CJX2-series accessories, and can be mounted on DIN rail or a flat panel. The body measures approximately 81 x 69 x 46 mm and weighs around 347g.

Typical Uses

  • Motor starters and direct-on-line motor control
  • Factory automation and machinery control panels
  • HVAC equipment switching
  • General industrial load control where remote switching is needed

What's in the Box

1 x AC Contactor CJX2-0911 Silver Alloy Point 220V.

Quick specs

Shipping Weight
0.35 kg
Shipping Dimensions
8 × 8 × 5 cm
See all specifications