
1 / 2 · Click to enlarge
At a glance
Made by ACEBOTT, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Controller/Development Board, Development Board; clock frequency 160; cpu 32-bit RISC processor (Tensilica L106).
Key Highlights
- Item Type: Controller/Development Board, Development Board
- Clock Frequency: 160
- CPU: 32-bit RISC processor (Tensilica L106)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Controller/Development Board, Development Board |
|---|---|
| Clock Frequency | 160 |
| CPU | 32-bit RISC processor (Tensilica L106) |
| USB Connector | Type-C |
| Operating Temperature (°C) | -40° to 85° C |
| Dimensions (L x W x H) mm | 49.6 x 25.4 |
| No. of I/O pins | 9 |
| Antenna Type | On-board PCB antenna |
| Interface | UART/GPIO/ADC/PWM/SPI/I2C |
| Display Resolution (pixel) | 1280x800 |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
Overview
The ACEBOTT ESP8266 Development Board, made by ACEBOTT, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Controller/Development Board, Development Board
- Clock Frequency: 160 (make sure the rest of your system works at this frequency)
- CPU: 32-bit RISC processor (Tensilica L106) (look up this chip to confirm it runs the firmware or libraries you plan to use)
- USB Connector: Type-C (confirm your cable or board uses the same connector)
- Operating Temperature (°C): -40° to 85° C
- Dimensions (L x W x H) mm: 49.6 x 25.4 (measure your mounting space before ordering)
- No. of I/O pins: 9
- Antenna Type: On-board PCB antenna
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The ACEBOTT QA010 ESP8266 V1.0 is a compact Wi-Fi development board designed for integrating Wi-Fi capabilities into various projects. At its core is the ESP8266 SoC, featuring the ultra-low power Tensilica L106 32-bit microcontroller, capable of operating at 80 MHz and 160 MHz frequencies. This board supports the IEEE 802.11 b/g/n Wi-Fi standards and includes a complete TCP/IP protocol stack, making it suitable for both standalone applications and as a Wi-Fi adapter for other microcontroller-based designs.
Features:
- Wi-Fi Connectivity: Complete 802.11b/g/n Wi-Fi SoC module.
- Microcontroller: Integrated Tensilica L106 ultra-low power 32-bit microcontroller with support for 80 MHz and 160 MHz frequencies.
- Interfaces: Supports UART, GPIO, ADC, PWM, SPI, and I2C interfaces.
- Antenna: On-board PCB antenna.
- Power Supply: Type-C connector.
- Operating Temperature: -40°C to 85°C.
- Security: Supports WEP, WPA-PSK, and WPA2-PSK security protocols.
Package Includes:
1 x ACEBOTT ESP8266 Development BoardQuick specs
- Item Type
- Controller/Development Board, Development Board
- Clock Frequency
- 160
- CPU
- 32-bit RISC processor (Tensilica L106)
- USB Connector
- Type-C
- Operating Temperature (°C)
- -40° to 85° C
- Dimensions (L x W x H) mm
- 49.6 x 25.4



















