Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Renke RS-PM-N01-2 Air Quality PM2.5 PM10 Sensor  -20℃~+60℃,0%RH~95%RH Non dewing (Type RS485) — image 1
Hover to zoom

1 / 2 · Click to enlarge

Renke

Renke RS-PM-N01-2 Air Quality PM2.5 PM10 Sensor -20℃~+60℃,0%RH~95%RH Non dewing (Type RS485)

23+ bought in past month
AI Summary
Air Quality Sensor for premium buyers

The Renke RS-PM-N01-2 Air Quality PM2.5 PM10 Sensor -20℃~+60℃,0%RH~95%RH Non dewing (Type RS485) by Renke is a premium air quality sensor designed for premium buyers. It features Item Type: Sensor and Voltage Rating: 10 to 30.

₹8,790
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹8,790
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Sensor
Voltage Rating: 10 to 30
Operating Temperature (°C): -20~+60
Measurement Range: PM2.5: 0~1000ug/m3, PM10: 0~1000ug/m3
Resolution: 1ug/m3
Accuracy: ±3%FS(@100μg/m3,25℃,50%RH)

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2115422Category: Air Quality Sensor

About This Product

The Renke RS-PM-N01-2 Air Quality PM2.5 PM10 Sensor -20℃~+60℃,0%RH~95%RH Non dewing (Type RS485) by Renke is a premium air quality sensor designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Sensor
  • Voltage Rating: 10 to 30 — works with standard household power
  • Operating Temperature (°C): -20~+60
  • Measurement Range: PM2.5: 0~1000ug/m3, PM10: 0~1000ug/m3 — reliable connection even at a distance
  • Resolution: 1ug/m3
  • Accuracy: ±3%FS(@100μg/m3,25℃,50%RH)
  • Signal Output: RS485/0-5v/0-10v/4-20ma
  • Shipping Weight: 0.22 kg

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This pm sensor mainly adopts a wall-mounted installation method to detect the concentration of PM2.5 and PM10 in the room. The shell is made of high-strength waterproof material, which is not easily interfered with by water vapor and smoke in the air. This is an industrial cheap air quality sensor with high measurement accuracy and a wider range of use. Note: The actual product may vary in slight variation with the image shown. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Range: 0-1000ug/m3, resolution 1ug/m3.
  2. PM2.5 and PM10 are output at the same time.
  3. Unique dual-frequency data acquisition and automatic calibration technology, the consistency can reach ±10%.
  4. Long service life, the overall warranty is 2 years in a normal environment.

Package Includes:

1 x Renke RS-PM-N01-2 Air Quality PM2.5 PM10 Sensor -20℃~+60℃,0%RH~95%RH Non dewing (Type RS485)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.