
1 / 3 · Click to enlarge
AI Summary
The ALINX FH1223 V2.0 is an FMC HPC module that adds four 10G SFP+ optical ports to compatible ALINX FPGA carrier boards. It enables high-speed fiber optic data communication up to 10 Gb/s per port with independent TX and RX channels.
Key Highlights
- Four SFP+ optical fiber interfaces with independent TX and RX channels
- Supports data rates up to 10 Gb/s per SFP+ port
- Standard FMC HPC connector for ALINX FPGA carrier boards
- Compact 76.5 x 69 mm form factor fits tight spaces
- Tool-free installation for quick replacement
- Lightweight at only 46 g
Ideal For
- FPGA developers building high-speed networking prototypes
- Engineers working on data acquisition systems with fiber links
- Research labs testing 10G optical communication
- Hardware designers integrating FMC modules into ALINX carrier boards
- Students and educators in advanced digital design courses
Buying Tip
Confirm that your ALINX FPGA carrier board has an FMC HPC connector and that your design can supply the required 2.7–5.5 V power before purchasing.
Elecvora expert review
Our verdict
The ALINX FH1223 V2.0 is a well-designed FMC HPC module that adds four 10G SFP+ ports to compatible ALINX FPGA boards. Its compact size and tool-free installation make it a convenient choice for high-speed optical prototyping.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four independent 10G SFP+ ports with TX/RX channels
- Compact 76.5 x 69 mm footprint saves board space
- Tool-free installation simplifies swapping
- Lightweight at 46 g
- Standard FMC HPC connector ensures compatibility
Cons
- Requires compatible ALINX carrier board with FMC HPC
- SFP+ transceivers and fiber cables not included
- Limited to ALINX ecosystem for guaranteed compatibility
Best for
FPGA developers needing multi-port 10G optical connectivity in a compact form factor
Not ideal for
Users without an ALINX FPGA carrier board or those needing integrated transceivers
Specifications
| Item Type | FPGA Optical Interface Card |
|---|---|
| Data Rate | Up to 10 Gb/s per SFP+ |
| Compatibility | ALINX FPGA Carrier Boards |
| Length (mm) | 76.5 |
| Width (mm) | 69 |
| Weight (g) | 46 |
| Sensor Type | Strain Gauge Based Load Cell |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.099 kg |
| Shipping Dimensions | 17 × 13 × 5 cm |
What's in the box
- 1 x ALINX FH1223 V2.0 4x 10G SFP+ Optical Fiber Interface FMC HPC Module
Frequently Asked Questions
What is the maximum data rate per SFP+ port?
Is this module compatible with non-ALINX FPGA boards?
Does the module include SFP+ transceivers or fiber cables?
What is the operating voltage of the module?
How do I install the module?
What are the dimensions and weight of the module?
Overview
The ALINX FH1223 V2.0 is a high-performance FMC HPC module engineered to bring four 10G SFP+ optical fiber interfaces to compatible ALINX FPGA carrier boards. Designed for FPGA development and prototyping, this module provides independent TX and RX channels on each SFP+ port, allowing full-duplex fiber optic communication at speeds up to 10 Gb/s. Its compact 76.5 x 69 mm form factor and standard FMC HPC connector make it a practical choice for engineers who need reliable high-speed optical connectivity without occupying excessive board space.
Key Features
- Four SFP+ ports: Each port has dedicated transmit and receive pins for bidirectional data flow.
- 10 Gb/s per port: Supports high-speed fiber optic transmission and reception up to 10 Gb/s.
- FMC HPC connector: Standard high-pin-count connector ensures compatibility with ALINX FPGA carrier boards.
- Compact design: Measures just 76.5 mm by 69 mm, ideal for space-constrained setups.
- Tool-free installation: Easy to install and replace without special tools.
- Lightweight: Weighs only 46 g, minimizing mechanical stress on the carrier board.
Specifications Explained
The FH1223 V2.0 is built around four SFP+ cages, each supporting data rates up to 10 Gb/s. This means you can connect fiber optic transceivers for high-bandwidth applications such as 10 Gigabit Ethernet, Fibre Channel, or custom protocols. The independent TX and RX channels per port allow simultaneous bidirectional communication, which is essential for full-duplex links. The FMC HPC connector provides a high-speed interface to the FPGA carrier board, ensuring signal integrity for multi-gigabit data streams. With a length of 76.5 mm and width of 69 mm, the module fits comfortably on standard FMC carriers while leaving room for other peripherals. The operating voltage range of 2.7 to 5.5 V is handled through the FMC connector, simplifying power design. The tool-free installation means you can quickly swap modules during development or testing.
Compatibility and Requirements
The FH1223 V2.0 is compatible with ALINX FPGA carrier boards that feature an FMC HPC connector. It requires a host carrier board with an FMC HPC site and appropriate power supply within the 2.7 to 5.5 V range. SFP+ optical transceivers (not included) are needed to connect fiber cables. Ensure your FPGA design includes the necessary serial transceivers and clocking resources to drive the SFP+ interfaces.
Typical Uses
- High-speed networking prototypes and switches
- Data acquisition systems requiring fiber optic links
- FPGA-based communication systems
- Development and testing of 10G optical interfaces
- Educational and research projects in high-speed digital design
What's in the Box
1 x ALINX FH1223 V2.0 4x 10G SFP+ Optical Fiber Interface FMC HPC Module
Quick specs
- Item Type
- FPGA Optical Interface Card
- Data Rate
- Up to 10 Gb/s per SFP+
- Compatibility
- ALINX FPGA Carrier Boards
- Length (mm)
- 76.5
- Width (mm)
- 69
- Weight (g)
- 46













