Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A heavy-duty aluminum case made for the Raspberry Pi 4 Model B that uses its grooved grid body as a passive heatsink. All ports stay accessible and the screws, thermal tapes and spanner are included for straightforward assembly.

Key Highlights

  • Grooved aluminum body acts as a passive heatsink for the Pi 4
  • Fits Raspberry Pi 4 Model B in 2GB, 4GB and 8GB versions
  • Weighs 184g for a solid, planted metal housing
  • Reserved GPIO cable interface keeps expansion access open
  • All board ports remain reachable once assembled
  • Thermal tapes, screws and hex socket spanner included

Ideal For

  • Raspberry Pi 4 owners who want a quiet, fan-free enclosure
  • Makers building GPIO-based electronics projects
  • Hobbyists setting up a compact Pi 4 desktop or media box
  • Users who prefer a solid metal housing over plastic shells

Buying Tip

Check that your board is a Raspberry Pi 4 Model B before ordering, since this case is not listed for other Pi models.

Elecvora expert review

Our verdict

A practical metal enclosure for the Raspberry Pi 4 Model B that trades a fan for a grooved aluminum body, keeping the build quiet and solid. The included hardware and reserved GPIO opening make it a sensible pick for project use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Passive grooved aluminum cooling with no fan noise
  • Solid 184g metal build that sits firmly
  • All ports and the micro SD slot stay accessible
  • GPIO cable interface reserved for expansion
  • Thermal tapes, screws and spanner included

Cons

  • Listed only for the Raspberry Pi 4 Model B
  • No fan option, so sustained heavy loads depend on the passive design
  • Assembly is required before use

Best for

Quiet, durable Raspberry Pi 4 Model B builds and GPIO projects

Not ideal for

Other Raspberry Pi models or users wanting an active fan-cooled case

Specifications

CompatibilityPi 4
SupportedRaspberry Pi4
Length (mm)90
Width (mm)65
Shipping Weight0.144 kg
Shipping Dimensions10 × 8 × 4 cm

What's in the box

  • 1 x Case parts
  • 1 x Thermal tapes
  • 4PCS x L-form hex socket spanner
  • 1 x Screws pack

Frequently Asked Questions

Which Raspberry Pi models does this case fit?
It is designed for the Raspberry Pi 4 Model B and is compatible with the 2GB, 4GB and 8GB versions. It is listed for the Pi 4 motherboard only.
Do I need to install a fan or heatsink?
No. The grooved aluminum body provides passive heat dissipation, so a cooling fan or separate heatsink is not required for this design.
Is the GPIO header accessible with the case on?
Yes. A GPIO cable interface is reserved in the case, so you can install a GPIO cable for expansion work.
What is included with the case?
The package contains the case parts, thermal tapes, a screws pack and an L-form hex socket spanner.
Can I reach the micro SD card slot after assembly?
Yes. The design keeps the micro SD card slot accessible so you can insert or remove a card without opening the case.
How should I care for the aluminum case?
Wipe it with a soft, dry or slightly damp cloth and avoid abrasive cleaners. Keep the thermal tapes in place so heat transfer to the metal body is maintained.

Overview

The Aluminum Grid Grooved Case is a metal enclosure designed around the Raspberry Pi 4 Model B. Instead of relying on a fan, it uses a grooved, grid-style aluminum body to move heat away from the board, so the computer can run quietly with no moving parts. At 184g, the case gives the Pi a weighty, stable feel on a desk or workbench.

It is intended for anyone who wants a durable housing for a Pi 4 without adding extra cooling hardware. The design keeps the board's ports accessible and leaves a reserved opening for a GPIO cable, so the case does not get in the way of typical projects.

Key Features

  • Passive cooling design: the grooved aluminum surface helps dissipate heat, so a cooling fan or separate heatsink is not required.
  • Metal construction: built from high-quality aluminum for a rigid, long-lasting housing.
  • Port access: the case is shaped to keep all ports of the Raspberry Pi 4 Model B reachable.
  • GPIO cable interface: a reserved opening supports installing a GPIO cable for expansion work.
  • Micro SD access: the card slot stays reachable, so you can insert or swap cards without dismantling the case.
  • Included hardware: thermal tapes, a screw pack and an L-form hex socket spanner come with the case.

Specifications Explained

The case measures 90mm long and 65mm wide, matching the footprint of the Raspberry Pi 4 Model B. Its 184g weight is a practical indicator of the metal build: it is heavier than a plastic shell, which helps it sit firmly and supports heat spreading through the body.

Shipping weight is listed at 0.144kg, and the packed dimensions are 10 × 8 × 4cm, so the parcel is compact and easy to store or ship. The grid grooving is the functional core of the design, adding surface area that helps the aluminum release heat into the surrounding air.

Compatibility and Requirements

This case is suitable for the Raspberry Pi 4 Model B motherboard only and is compatible with the 2GB, 4GB and 8GB versions. It is not listed as compatible with other Raspberry Pi models. Assembly uses the supplied screws, spanner and thermal tapes; no fan or additional heatsink is needed for the cooling approach described here.

Typical Uses

A metal case like this suits a Pi 4 used as a small desktop computer, a media or learning machine, or a base for electronics projects where the GPIO opening matters. Because the enclosure is passive, it is also a sensible choice where fan noise would be unwelcome.

What's in the Box

  • 1 x Case parts
  • 1 x Thermal tapes
  • 4PCS x L-form hex socket spanner
  • 1 x Screws pack

Quick specs

Compatibility
Pi 4
Supported
Raspberry Pi4
Length (mm)
90
Width (mm)
65
Shipping Weight
0.144 kg
Shipping Dimensions
10 × 8 × 4 cm
See all specifications