Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A DIN-rail voltage protector that automatically cuts power during over/under voltage or overload and reconnects after a safe delay. Adjustable thresholds and LED monitoring make it easy to tailor protection to your equipment.

Key Highlights

  • Triple protection against overvoltage, undervoltage, and overload
  • Adjustable cut-off and recovery thresholds for custom setup
  • Auto-reconnect with adjustable delay from 1 to 500 seconds
  • Real-time LED display shows voltage and current
  • 63A max current and 13.8kW max load capacity
  • Compact DIN-rail mount fits standard distribution boxes

Ideal For

  • Homeowners in areas with unstable mains voltage
  • Small business owners protecting sensitive equipment
  • Electricians installing distribution board protection
  • Workshop operators with high-current tools
  • Anyone needing adjustable voltage and overload protection

Buying Tip

Check that your total connected load stays below 63A (13.8kW) and that your wiring can handle the current before installing this protector.

Elecvora expert review

Our verdict

A practical, adjustable protector that combines voltage and current monitoring in a compact DIN-rail package. It offers good value for those needing customisable protection without complex setup.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adjustable thresholds for tailored protection
  • Clear LED display for real-time monitoring
  • Auto-reconnect with configurable delay
  • Compact DIN-rail design saves space
  • High 63A load capacity

Cons

  • Requires wiring into distribution board, not plug-and-play
  • No detailed manual included in box contents
  • Limited to single-phase systems only

Best for

Home and small business distribution boards needing adjustable voltage and overload protection.

Not ideal for

Three-phase systems or users seeking a simple plug-in protector.

Specifications

Item TypeVoltage Protector
Max Current (A)63
Voltage Rating230VAC
Control ModeAutomatic
Frequency50/60 Hz
InputSingle Phase 140V–300VAC
MaterialABS Plastic
Max Load13.8kW
Operating Power≤2W
Operating Temperature (°C)-20 to +55
Length (mm)65
Width (mm)35
Weight (g)150
Shipping Weight0.188 kg
Shipping Dimensions10 × 8 × 5 cm

What's in the box

  • 1 x amiciSmart Automatic Over/Under Voltage and Over Load Protection unit

Frequently Asked Questions

What does this voltage protector do?
It monitors incoming voltage and current, disconnecting power if levels exceed your set thresholds, then reconnects automatically after a delay once conditions normalise.
Can I adjust the protection settings?
Yes, you can customise the overvoltage, undervoltage, and overload trip points, as well as the reconnect delay from 1 to 500 seconds.
What is the maximum load it can handle?
The maximum current is 63A, which corresponds to a maximum load of 13.8kW at 220V.
Does it work with three-phase power?
No, this model is designed for single-phase 220–230VAC systems only.
What is included in the package?
The package includes one amiciSmart Automatic Over/Under Voltage and Over Load Protection unit.
How do I install it?
It mounts on a standard DIN rail. Wiring should be done by a qualified electrician following local regulations.

Overview

The amiciSmart Automatic Over/Under Voltage and Overload Protection is a compact, DIN-rail mounted device that shields single-phase 220V electrical systems from harmful voltage fluctuations and current overloads. It continuously samples the incoming supply and compares it against user-defined thresholds. When an abnormal condition is detected, the protector swiftly disconnects the load to prevent damage. Once the supply stabilises and the configured reconnect delay has elapsed, power is automatically restored. The built-in LED display provides live voltage and current readings, giving you clear insight into power quality at a glance.

Key Features

  • Triple protection: Guards against overvoltage, undervoltage, and overload conditions.
  • Adjustable settings: Customise cut-off and recovery thresholds to match your equipment's tolerance.
  • Auto-reconnect: Restores power automatically after a user-set delay (1–500 seconds).
  • Real-time monitoring: LED display shows voltage and current values continuously.
  • High load capacity: Supports up to 63A and 13.8kW, suitable for demanding circuits.
  • Fast response: Acts quickly to disconnect during fault conditions.
  • DIN-rail mounting: Fits standard distribution boards for tidy installation.

Specifications Explained

Voltage rating (230VAC): Designed for single-phase systems operating at nominal 220–230V. The input range of 140–300VAC allows it to monitor a wide band of supply voltages.

Maximum current (63A): This is the highest current the protector can pass through to the load. It corresponds to a maximum load of 13.8kW at 220V. Ensure your total connected load does not exceed this rating.

Adjustable thresholds: You can set the overvoltage, undervoltage, and overload trip points to suit sensitive equipment or local supply conditions.

Reconnect delay (1–500s): After a fault clears, the protector waits for the set delay before reconnecting. This prevents rapid cycling and allows the supply to stabilise.

Operating temperature (-20 to +55°C): Suitable for typical indoor distribution environments.

Power consumption (≤2W): Minimal energy use during operation.

Compatibility and Requirements

This protector is intended for single-phase 220–230VAC systems at 50/60Hz. It requires a standard DIN rail for mounting. The maximum load must not exceed 63A or 13.8kW. The device is not designed for three-phase systems. Ensure the wiring and circuit breakers upstream are rated for the current you intend to draw. The compact dimensions (65mm length, 35mm width) allow installation in most distribution boxes.

Typical Uses

  • Residential distribution boards protecting household appliances.
  • Small workshops with sensitive power tools.
  • Offices and retail spaces with computers and electronics.
  • Protecting HVAC equipment, refrigerators, and pumps from voltage swings.
  • Any single-phase circuit where stable voltage is critical.

What's in the Box

1 x amiciSmart Automatic Over/Under Voltage and Over Load Protection unit.

SPN-BFCC Smart Automatic Over/Under Voltage SPN-BFCC Smart Automatic Over/Under Voltage SPN-BFCC Smart Automatic Over/Under Voltage

Quick specs

Item Type
Voltage Protector
Max Current (A)
63
Voltage Rating
230VAC
Control Mode
Automatic
Frequency
50/60 Hz
Input
Single Phase 140V–300VAC
See all specifications