Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single-phase 230VAC automatic transfer switch rated at 125A that moves the load to a backup source when the main supply fails. It also allows manual changeover for maintenance, with silver alloy contacts and a compact panel-friendly body.

Key Highlights

  • 125A current rating for high-demand single-phase loads at 230VAC
  • Automatic changeover to the backup supply when the main source fails
  • Manual mode available for safe control during maintenance
  • Silver alloy contacts for conductivity and durability
  • Compact 102 x 95 mm body fits panels and enclosures
  • Handles dual inputs from mains plus generator or inverter backup

Ideal For

  • Homeowners wiring a generator or inverter backup for essential circuits
  • Electricians building single-phase changeover panels for small offices
  • Workshops running high-current single-phase equipment
  • Light industrial sites needing automatic supply transfer
  • Installers fitting compact changeover devices into existing enclosures

Buying Tip

Confirm your backup source can supply the full load current and that your wiring and protection are rated for 125A before installing this switch.

Elecvora expert review

Our verdict

A practical, high-current automatic changeover unit for single-phase 230VAC systems where a backup supply needs to take over without fuss. The compact body and silver alloy contacts make it a sensible panel component, provided installation is done by a qualified electrician.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 125A rating suits demanding single-phase loads
  • Automatic transfer with manual override for maintenance
  • Silver alloy contacts support conductivity and durability
  • Compact footprint for panel and enclosure mounting
  • Dual inputs for mains plus generator or inverter backup

Cons

  • Requires a separate backup AC source, which is not included
  • High-current mains wiring demands a qualified installer
  • No enclosure or mounting accessories listed in the box

Best for

Single-phase 230VAC installations needing automatic transfer to a generator or inverter backup

Not ideal for

Three-phase systems or loads exceeding the 125A rating

Specifications

Item TypeChangeover Switch
Model No. / NameHigh Capacity Auto Type
Input Voltage230V
Output Voltage230V
Current Rating (A)125A
Power SourceAC
Control TypeAutomatic
Length (mm)102
Width (mm)95
Weight (g)545
Shipping Weight0.62 kg
Shipping Dimensions14.5 × 12.5 × 10 cm

What's in the box

  • 1 x amiciSmart Dual Power Automatic Control Transfer Switch 230VAC, 125A Changeover Switch
  • 1 x User's Manual

Frequently Asked Questions

How does this transfer switch work?
It monitors the main 230VAC supply and, in automatic mode, transfers the load to the backup input when the main source fails. Manual changeover is also available after power is safely isolated.
Can I use it with a generator or inverter?
Yes. The dual power input is intended for a main supply plus a generator or inverter backup, as long as the backup source provides 230VAC single-phase power within the current rating.
What is the maximum current it can handle?
The switch is rated at 125A at 230VAC. Keep the connected load and the backup source within this limit.
Does it work on three-phase power?
No. This model is designed for single-phase 230VAC systems only.
What comes in the package?
You receive one amiciSmart 125A dual power automatic transfer switch and one user's manual.
How should I maintain it?
Have a qualified electrician inspect connections and contacts periodically, and always isolate power before any manual operation or servicing.

Overview

The amiciSmart 125A Dual Power Automatic Control Transfer Switch is designed to keep a single-phase 230VAC load running when the primary supply is interrupted. It accepts two AC inputs and, in automatic mode, moves the load across to the backup source. For maintenance or deliberate control, a manual mode is available once the power has been safely isolated.

With a 125A current rating, this changeover switch is built for installations that draw serious current rather than small control circuits. The silver alloy contacts are chosen to support conductivity and resist wear over repeated switching cycles. The housing measures roughly 102 mm by 95 mm, so it can be mounted in a distribution panel or enclosure without taking excessive space.

Key Features

  • Automatic control: transfers the load to the backup input when the main supply drops, without manual intervention.
  • Manual override: switch by hand after isolating power for servicing or planned control.
  • 125A rating at 230VAC: suits demanding single-phase circuits.
  • Silver alloy contacts: selected for conductivity and long-term reliability.
  • Dual power input: pairs a main supply with a generator or inverter backup.
  • Compact build: a small footprint for tidy panel installation.

Specifications Explained

230VAC input and output means the device is intended for standard single-phase mains voltage, with the same voltage passed through to the load. It is not a voltage converter or transformer.

125A current rating is the headline figure: it defines the load current the switch is built to carry. Size your circuit and cabling with this limit in mind, and confirm that your backup source can deliver the current your load needs.

Automatic control type indicates the switch acts on its own when supply conditions change, while manual operation remains available for maintenance. The silver alloy contacts are the conductive interface that carries current each time the switch operates.

Compatibility and Requirements

This is a single-phase 230VAC device. It requires a main AC supply and a separate backup AC source, such as a generator or inverter output, wired to its two inputs. The connected load must stay within the 125A rating. Because the unit handles mains voltage and high current, installation should be carried out by a qualified electrician working to local wiring regulations.

Typical Uses

  • Residential backup power where a generator or inverter supports essential circuits.
  • Small offices that need to keep equipment running through outages.
  • Workshops and light industrial panels with single-phase loads.
  • Any panel installation where automatic changeover between two AC sources is required.

What's in the Box

  • 1 x amiciSmart Dual Power Automatic Control Transfer Switch 230VAC, 125A Changeover Switch
  • 1 x User's Manual

Quick specs

Item Type
Changeover Switch
Model No. / Name
High Capacity Auto Type
Input Voltage
230V
Output Voltage
230V
Current Rating (A)
125A
Power Source
AC
See all specifications