
1 / 3 · Click to enlarge
AI Summary
A compact PIC18F/16F development board supplied with a PIC18F452 microcontroller, 16x2 LCD, 4x4 keypad and dual seven-segment display already on board. It lets you start coding and testing 8-bit PIC projects over USB-C power without hand-wiring the usual peripherals.
Key Highlights
- Supports 40-pin DIP PIC18F and PIC16F microcontrollers
- PIC18F452 microcontroller pre-fitted on the board
- 16x2 LCD and 4x4 keypad built in for direct interaction
- Dual seven-segment display for numeric readouts
- Analog input interface for LM35 sensor or 10k potentiometer
- USB-C +5V power input and individual port I/O access
Ideal For
- Students learning 8-bit PIC microcontroller programming
- Educators building repeatable lab exercises
- Embedded developers prototyping sensor and keypad interfaces
- Makers who want on-board LCD and seven-segment output
- Hobbyists moving from breadboard PIC circuits to a fixed base
Buying Tip
Check that you have a PICkit programmer and a USB-C power source before ordering, since neither is included with the board.
Elecvora expert review
Our verdict
A sensible first PIC board: the PIC18F452, LCD, keypad and seven-segment display are already in place, so the learning curve starts at the code rather than the wiring. It is modest in scope but well matched to coursework and early prototyping.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Microcontroller and main peripherals included on one board
- Accepts a range of 40-pin DIP PIC18F and PIC16F devices
- USB-C +5V power keeps the bench setup simple
- Analog input interface ready for LM35 or a 10k potentiometer
- Compact 100 x 69 mm footprint at 52 g
Cons
- PICkit programmer is not included
- No onboard motor, relay or GSM hardware without the UDB expansion
- Limited to 40-pin DIP parts, so smaller packages need another board
Best for
Students and educators working through 8-bit PIC fundamentals
Not ideal for
Developers needing surface-mount PIC parts or integrated motor and GSM hardware
Specifications
| Processor Type | Microcontroller |
|---|---|
| Core | 8-bit |
| Display Size (Inch) | 16×2 LCD |
| Length (mm) | 100 |
| Width (mm) | 69 |
| Weight (g) | 52 |
| Shipping Weight | 0.077 kg |
| Shipping Dimensions | 14 × 10 × 3 cm |
What's in the box
- 1 x Amotech Labs PIC18F/16F Development Board with PIC18F452
Frequently Asked Questions
Does the board come with a microcontroller already installed?
Which microcontrollers can I use with this board?
How is the board powered?
What do I need to program it?
What is included in the package?
Can I connect sensors and external circuits?
Overview
The Amotech Labs PIC18F/16F Development Board is a compact 8-bit microcontroller platform built for people who want to spend their time on code and circuits rather than on wiring. A PIC18F452 is already fitted, and the board carries the peripherals most PIC exercises call for: a 16x2 LCD, a 4x4 keypad and a dual seven-segment display. The board measures 100 mm by 69 mm and weighs just 52 g, so it sits comfortably on a desk or in a project box.
Because the board accepts 40-pin DIP PIC18F and PIC16F devices, it can serve as a single reusable base for a whole sequence of lessons or prototypes. Power is supplied through a USB-C input at +5V, and individual port headers expose the I/O pins for expansion.
Key Features
- Pre-fitted PIC18F452: start programming immediately with a known-good 8-bit microcontroller.
- 40-pin DIP socket support: swap in other PIC18F or PIC16F microcontrollers for different projects.
- On-board 16x2 LCD: display menus, sensor values and status messages without extra modules.
- 4x4 keypad: add user input for menus, setpoints and simple interfaces.
- Dual seven-segment display: useful for counters, timers and numeric output.
- Analog input interface: connect an LM35 temperature sensor or a 10k potentiometer for sensor experiments.
- USB-C +5V power: power the board from a standard USB-C source.
Specifications Explained
The 8-bit microcontroller core is the heart of the board and matches the architecture used across the PIC18F and PIC16F families, so code and pin behaviour stay familiar as you move between projects. The 16x2 LCD gives two lines of sixteen characters, enough for readings, prompts and simple menus.
The 100 x 69 mm footprint leaves room for the keypad, display and headers without becoming bulky, and the 52 g board weight means it is easy to carry between lab sessions. The analog input interface is intended for an LM35 sensor or a 10k potentiometer, giving a straightforward path into analog-to-digital experiments. Individual port I/O pin connectors let you bring signals out to breadboards or external circuits.
Compatibility and Requirements
The board is designed for 40-pin DIP PIC18F and PIC16F microcontrollers. Programming is done with PICkit programmers, which are not included. A USB-C power source is required to run the board at +5V. The board can also be expanded using the Universal Development Board (UDB) for motors, relays, GSM and industrial-style applications.
Typical Uses
- Classroom and self-study exercises on 8-bit PIC architecture
- Sensor experiments using an LM35 or a 10k potentiometer
- Menu and keypad interface practice
- Early firmware prototyping before moving to a custom PCB
- Demonstration builds for workshops and lab sessions
What's in the Box
1 x Amotech Labs PIC18F/16F Development Board with PIC18F452.

Quick specs
- Processor Type
- Microcontroller
- Core
- 8-bit
- Display Size (Inch)
- 16×2 LCD
- Length (mm)
- 100
- Width (mm)
- 69
- Weight (g)
- 52
















