Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Arduino Nicla Sense ME ABX00050 is a tiny 22.86 mm board with a 64 MHz nRF52832 and four Bosch sensors for motion and environmental sensing. Its built-in AI capabilities and BLE 4.2 make it ideal for low-power edge projects.

Key Highlights

  • Tiny 22.86 mm square board with 2 g weight
  • nRF52832 Arm Cortex-M4 at 64 MHz with 512 KB flash
  • Four Bosch sensors including AI-enabled BHI260AP and BME688
  • Bluetooth 4.2 connectivity for wireless projects
  • Castellated pins with I2C, SPI, serial, ADC and ESLOV
  • Supports 3.7 V Li-po battery with integrated charger

Ideal For

  • IoT developers building low-power sensor nodes
  • Makers adding motion and environmental sensing to projects
  • Engineers prototyping edge AI applications
  • Researchers monitoring vibration and air quality
  • Product designers needing a tiny, battery-powered board

Buying Tip

Remember to order a compatible 3.7 V Li-po battery separately if you plan to use the board as a standalone device.

Elecvora expert review

Our verdict

The Arduino Nicla Sense ME packs an impressive array of AI-enabled sensors into a tiny, low-power board. It is a versatile tool for edge sensing, though users must budget for a separate battery and consider the limited I/O for complex projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Extremely compact and lightweight
  • Four high-quality Bosch sensors with AI features
  • Low power consumption with battery charger
  • Bluetooth 4.2 and castellated pins for easy integration

Cons

  • Battery not included
  • Limited number of I/O pins
  • Requires soldering for permanent installations

Best for

Edge AI and sensor fusion projects in tight spaces

Not ideal for

Projects requiring many GPIOs or extensive wired connectivity

Specifications

Item TypeDevelopment Board
Model No. / NameABX00050
MicrocontrollernRF52 Series
Microcontroller Chip64 MHz Arm® Cortex M4 (nRF52832)
SensorBHI260AP - Self-learning AI smart sensor with, integrated accelerometer and gyroscope, BMP390 -, Digital pressure sensor, BMM150 - Geomagnetic sensor,, BME688 - Digital low power gas, pressure, temperature, & humidity sensor with AI
I/O pinsCastellated pins with the following features: 1x I2C bus, (with ext. ESLOV connector), 1x serial port, 1x SPI,, 2x ADC , programmable I/O voltage from 1.8-3.3V
ConnectivityBluetooth® 4.2
Operating PowerMicro USB (USB-B), Pin Header, 3.7V Li-po battery with Integrated battery charger
Memory Capacity512KB Flash / 64KB RAM, 2MB SPI Flash for storage,, 2MB QSPI dedicated for BHI260AP
InterfaceUSB interface with debug functionality
Dimensions (L x W x H) mm22,86 mm x 22,86 mm
Weight (g)2 g
Shipping Weight0.022 kg
Shipping Dimensions6 × 6 × 3 cm

What's in the box

  • 1 x Official Arduino Nicla Sense ME ABX00050

Frequently Asked Questions

What sensors are included on the Nicla Sense ME?
The board includes the BHI260AP (AI smart sensor with accelerometer and gyroscope), BMM150 (geomagnetic), BMP390 (pressure) and BME688 (gas, pressure, temperature and humidity with AI).
Can I power the board with a battery?
Yes, it supports a 3.7 V Li-po battery via an onboard connector and includes an integrated battery charger. The battery is not included.
Is the Nicla Sense ME compatible with Arduino MKR shields?
Yes, the board is compatible with the Arduino MKR and Portenta form factors, so it can be used with existing shields and carriers.
What is the operating voltage for the I/O pins?
The programmable I/O voltage can be set from 1.8 V to 3.3 V, allowing compatibility with a range of peripherals.
Does the board support debugging?
Yes, the USB interface includes debug functionality for programming and troubleshooting.
What is included in the package?
The package includes one Official Arduino Nicla Sense ME ABX00050 board. A battery and USB cable are not included.

Overview

The Arduino Nicla Sense ME ABX00050 is a miniature development board that combines a powerful nRF52832 microcontroller with four state-of-the-art Bosch sensors. Despite its 22.86 mm square size and 2 g weight, it delivers full sensing and processing capabilities for motion and environmental analysis. The board is part of the Nicla family and is designed for easy integration into space-constrained projects.

Key Features

  • AI-enabled sensing: The BHI260AP smart sensor and BME688 gas sensor both include embedded AI, enabling on-device intelligence.
  • Comprehensive sensor set: Measure acceleration, gyroscope, magnetic field, pressure, humidity, temperature, air quality and CO2 levels.
  • Low power: Optimized for battery operation with a 3.7 V Li-po connector and integrated charger.
  • Flexible connectivity: Bluetooth 4.2 and castellated pins with I2C, SPI, serial and ADC interfaces.
  • Expandable memory: 512 KB flash, 64 KB RAM, plus 2 MB SPI flash and 2 MB QSPI dedicated to the BHI260AP.

Specifications Explained

The 64 MHz Arm Cortex-M4 (nRF52832) provides ample processing power for sensor fusion and edge AI tasks. The BHI260AP is a self-learning AI smart sensor with integrated accelerometer and gyroscope, while the BMM150 adds geomagnetic sensing. The BMP390 offers precise digital pressure measurement, and the BME688 combines gas, pressure, temperature and humidity sensing with AI. Castellated pins allow the board to be soldered directly onto a carrier PCB, and the programmable I/O voltage from 1.8 V to 3.3 V ensures compatibility with a range of peripherals. The USB interface includes debug functionality for programming and troubleshooting.

Compatibility and Requirements

The Nicla Sense ME is compatible with the Arduino MKR and Portenta form factors, allowing it to be used with existing shields and carriers. It can be powered via micro USB, pin header, or a 3.7 V Li-po battery (not included). A compatible battery is required for standalone operation. The board supports the Arduino IoT Cloud for secure communication.

Typical Uses

This board is ideal for vibration and environmental sensing in preventive maintenance, robot and rover stabilization, manufacturing process monitoring, man-down detection, environmental parameter monitoring, gas detection and fire detection. Its small size and low power consumption make it suitable for wearable and remote sensing applications.

What's in the Box

1 x Official Arduino Nicla Sense ME ABX00050.

Quick specs

Item Type
Development Board
Model No. / Name
ABX00050
Microcontroller
nRF52 Series
Microcontroller Chip
64 MHz Arm® Cortex M4 (nRF52832)
Sensor
BHI260AP - Self-learning AI smart sensor with, integrated accelerometer and gyroscope, BMP390 -, Digital pressure sensor, BMM150 - Geomagnetic sensor,, BME688 - Digital low power gas, pressure, temperature, & humidity sensor with AI
I/O pins
Castellated pins with the following features: 1x I2C bus, (with ext. ESLOV connector), 1x serial port, 1x SPI,, 2x ADC , programmable I/O voltage from 1.8-3.3V
See all specifications