Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This tools, industrial & scientific is a good fit for DIY builders and repair work.

Ideal For

  • Repairs around the home
  • Electronics bench work
  • Workshop jobs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The New ATU100 Automatic Antenna Tuner 100W 1.8-55MHz/1.8-30MHz Assembled For 5-100W Shortwave Radio Stations is listed in our tools, industrial & scientific range and suits DIY builders and repair work. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Type A:  1.8-55MHz Automatic Antenna Tuner
With battery
Features:
- 0.96-inch OLED display
- Frequency 1.8-55 MHz
- Power supply voltage range: 10-15V DC 
- Maximum current consumption: 300 mA
- Maximum working power: 100W
- Maximum possible measured power: 150W
- 1W: It is necessary to start setting the minimum power
- Minimum possible measured power: 0.1W
- Step for measurement on powers under 10W: 0.1W
- Step for measurement on powers above 10W: 1W
- Power measurement accuracy: 10%
- Specified maximum inductor: 8.4 uH capacity
- The minimum installation step of inductor: 0.05μH
- Maximum installation capacity: 1870 pF capacitor
- Minimum installation step: 10 pF

Package Included:
-1 x Automatic Antenna Tuner with Shell


Note: The product is assembled and with shell.






Type B:  1.8-30MHz Mini Automatic Antenna Tuner

Note:

It is assembled and ready to use.
- The device does not consider its own efficiency.
- Supply voltage is 5V standard voltage.
-This Tuner can install  battery inside,if you need battery,please choose the one with battery 

(This product does not include a battery)
CGJ-100 1.8-30MHz Mini Automatic Antenna Tuner 0.91" OLED Display For 5-100W Shortwave Radio Stations

- CGJ-100: For high-power shortwave radio stations using 5-100W.

Features:
- Mini short-wave automatic antenna tuner.
- TYPE-C charging interface, M connector.
- With a 0.91-inch OLED display.
- This antenna tuner is automatically tuned and does not require any control wires, suitable for most radio stations.
- The device contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping 1.8-30MHz amateur radio HF band.

Specifications:
- Power supply voltage: USB charge and discharge
- Maximum current consumption: 400ma
- Maximum working throughput: 100W
- Maximum possible measurement power: 150W
- Minimum power required to start tuning: 5W
- Minimum possible measurement power: 0.1W
- Measurement steps for power up to 10W: 0.1W
- Measurement steps for power higher than 10W: 1W
- Power measurement accuracy: 10%
- Maximum installation inductance: 8.53uH
- Minimum installation inductance step size: 0.05uH
- Maximum installation capacitance: 1869pF
- Minimum installation capacitance step: 10pF
- 4pcs panel buttons: POW, BYP, AUTO and BOT function
- Display: 0.91" OLED

Package Included:
- 1 x Automatic Antenna Tuner(This product does not include a battery)

Tyep C: Without shell (PCB Board + Screen)

Specifications:
Power supply range: 10 - 15 VDC
Max current : 450mA
Max working power: 100 watts
Max measured power: 150 watts
Minimum power for tuning start: 1 watt
Recommended maximum power while tuning not above 30 watts. (after tuning you can set 100 watts and work on this power)
Minimum measured power: 0.1 watt
Step for measurement on powers under 10 watts: 0.1 watt
Step for measurement on powers above 10 watts : 1 watt 
Power measurement accuracy : 10%
Maximum inductance set: 8.5 uH
Minimal step for setting inductance: 0.1 uH
Maximum installed capacity: 1870 pF
Minimal step for setting capacity: 10 pF
 
100 Watts tuner, 7x7 (7 capacitors x 7 coils) based on PIC 16F1938.
Dimentsion - 120 mm x 62 mm.


 
Package Included:
1 x PCB board
1 x LCD screen
1 x Dupont cable

Note: not included battery

Details picture:



Product Safety Information