
1 / 5 · Click to enlarge
AI Summary
A B3950 10K NTC thermistor probe with a stainless steel 5x25mm tip, XH2.54 connector, and 4m cable for measuring -20 to 105°C. The long cable and standard connector make it easy to add reliable temperature sensing to electronics and DIY projects.
Key Highlights
- B3950 10K NTC thermistor with 10K ±1% resistance at 25 °C
- Measures -20 to 105 °C in air, liquids, and on surfaces
- Stainless steel 5 x 25 mm probe sheath for durability
- 4-meter cable with XH2.54 2-pin connector
- Typical dissipation constant of 5 mW/°C
- Probe insulation greater than 100 MOhm
Ideal For
- 3D printer builders needing a spare or replacement thermistor
- Arduino and Raspberry Pi hobbyists adding temperature sensing
- HVAC technicians and DIYers monitoring duct or ambient air
- Makers building custom thermostats or temperature controllers
- Anyone needing a long-cable probe for remote temperature measurement
Buying Tip
Check that your controller or firmware supports a B3950 10K NTC curve and that the XH2.54 connector matches your board's header before buying.
Elecvora expert review
Our verdict
A solid, no-frills NTC probe that covers the essentials for hobbyist and light professional temperature sensing. The long cable and standard connector save time, though you must confirm your electronics support the B3950 curve.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Ready to use with 4m cable and XH2.54 connector
- Stainless steel probe is durable and suitable for liquids
- Wide -20 to 105 °C range covers many applications
- 10K ±1% resistance is a common, well-supported value
Cons
- Requires a compatible reading circuit and firmware table
- Not suitable for temperatures above 105 °C
- Connector may not match all boards without an adapter
Best for
Makers and technicians needing a reliable, long-cable NTC probe for electronics and HVAC projects
Not ideal for
High-temperature industrial processes or systems requiring pre-calibrated plug-and-play sensors
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | Thermistor Temperature Sensor |
| Probe sheath material | Stainless Steel |
| Style | B3950 10K |
| Measurement Range | -20 to 105 °C |
| Probe insulation(MOhm) | 100 |
| Output wires | 2 |
| Size of probe(mm) | 5 x 25 |
| Typical Dissipation Constant | 5mW/ °C |
| Resistance (Ohm) | 10K ± 1% |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 7 × 4 × 2 cm |
What's in the box
- 1 x B3950 10K NTC Thermistor Temperature Sensor 5 x 25 mm with XH2.54 connector and 4-meter cable
Frequently Asked Questions
What is the resistance of this thermistor at 25 °C?
Can this sensor be used in liquids?
What connector does it have?
Does it work with Arduino?
What is the maximum temperature?
Is a mating connector included?
Overview
The B3950 10K NTC Thermistor Temperature Sensor is a negative temperature coefficient probe designed for accurate temperature measurement in electronics and DIY projects. It combines a 10K ±1% thermistor element inside a stainless steel 5 x 25 mm sheath with a 4-meter cable terminated in an XH2.54 connector. This makes it a practical choice for remote sensing where the probe needs to reach into an enclosure, duct, or liquid while the connector stays at your control board.
Key Features
- B3950 10K NTC element: Provides a predictable resistance curve for common temperature-sensing circuits.
- Stainless steel probe: The 5 x 25 mm sheath protects the thermistor and allows use in air, liquids, and contact surfaces.
- 4-meter cable: Gives you enough length to route from the measurement point to your controller without extensions.
- XH2.54 connector: A standard 2-pin connector that plugs into many boards and headers, or can be adapted easily.
- Wide measurement range: Operates from -20 to 105 °C, covering typical environmental and equipment temperatures.
Specifications Explained
Resistance (10K ±1%): At 25 °C the thermistor nominally reads 10,000 ohms. This value is widely used with voltage divider circuits and firmware tables for Arduino, Raspberry Pi, and similar platforms.
Measurement range (-20 to 105 °C): The probe is suitable for cold storage monitoring, ambient air sensing, and heated components that stay within this band. Avoid exceeding 105 °C to prevent damage.
Probe size (5 x 25 mm): The slim stainless steel tip fits into tight spaces and responds quickly to temperature changes while offering mechanical protection.
Dissipation constant (5 mW/°C): This indicates how much power the thermistor can dissipate for a given temperature rise, helping you choose a suitable excitation current to avoid self-heating errors.
Insulation (>100 MOhm): The probe insulation resists leakage, which is important when measuring in damp or conductive environments.
Compatibility and Requirements
The sensor uses a 2-wire NTC thermistor interface and an XH2.54 2-pin connector. It requires a suitable reading circuit, such as a voltage divider with a series resistor and an analog input or dedicated thermistor input on your controller. No additional components are included, so you will need a compatible board or meter and, if needed, a mating XH2.54 header or cable. The 4-meter cable is long enough for most installations but should be routed away from high-current wiring to reduce noise pickup.
Typical Uses
- 3D printer heated bed and hotend temperature monitoring (where B3950 10K is supported)
- DIY thermostats and temperature controllers
- HVAC and duct temperature sensing
- Aquarium or soil temperature monitoring (probe is waterproof in construction but check compatibility)
- General electronics projects with Arduino, Raspberry Pi, or similar microcontrollers
What's in the Box
1 x B3950 10K NTC Thermistor Temperature Sensor 5 x 25 mm with XH2.54 connector and 4-meter cable.
Quick specs
- Item Type
- Sensor
- Model No. / Name
- Thermistor Temperature Sensor
- Probe sheath material
- Stainless Steel
- Style
- B3950 10K
- Measurement Range
- -20 to 105 °C
- Probe insulation(MOhm)
- 100













