Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A BME680 sensor sealed in a waterproof stainless steel probe with a one-metre cable, reporting temperature, humidity and barometric pressure over I²C. The metal housing lets you place it in damp or outdoor locations where a bare board would not last.

Key Highlights

  • BME680 sensor for temperature, humidity and barometric pressure
  • Waterproof stainless steel probe body for damp and outdoor sites
  • One-metre cable gives useful reach from enclosure to measuring point
  • I²C signal output for straightforward microcontroller integration
  • Wide -40 to +85 °C operating range and 0 to 100% RH coverage
  • Runs from a 3.0 to 3.6 VDC supply

Ideal For

  • Makers building weather stations or environmental loggers
  • Growers monitoring greenhouse and grow-room climate
  • HVAC technicians checking duct temperature and humidity
  • IoT developers needing a protected outdoor sensor
  • Students and hobbyists learning I²C sensor integration

Buying Tip

Confirm your controller can supply 3.0 to 3.6 VDC and read a BME680 over I²C before ordering, since a 5 V rail is outside the stated rating.

Elecvora expert review

Our verdict

A tidy way to get a BME680 into damp or outdoor locations without designing your own enclosure. The stainless housing and one-metre lead do most of the work here, and the I²C interface keeps integration simple.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Waterproof stainless steel body suits humid and outdoor sites
  • Three measurements from one probe: temperature, humidity and pressure
  • One-metre cable separates sensor from electronics
  • Wide -40 to +85 °C operating range
  • Light 21 g body is easy to mount

Cons

  • Supply must stay within 3.0 to 3.6 VDC, so a 5 V rail is not suitable
  • I²C over a long lead can be sensitive to interference
  • No driver board or connectors are described in the package

Best for

Makers and technicians who need a protected BME680 probe for outdoor or humid monitoring

Not ideal for

Users wanting a plug-and-play USB sensor or a 5 V-ready module

Specifications

Item TypeProbe
Model No. / NameBME680
Rated Voltage (VDC)3.0 to 3.6
MaterialWaterproof stainless steel
Signal OutputI²C
Pressure Range (MPa)300 – 1100 hPa
Humidity Range0 – 100% RH
Operating Temperature (°C)-40 to +85
Cable Length1
Cable Specifications04
Weight (g)21
Shipping Weight0.03 kg
Shipping Dimensions18 × 12 × 3 cm

What's in the box

  • 1 x BME680 stainless steel probe with 1 m cable

Frequently Asked Questions

What does this probe measure?
It uses a BME680 sensing element to report temperature, humidity and barometric pressure over an I²C signal.
What voltage does it need?
The rated supply is 3.0 to 3.6 VDC. Check your board's output before connecting the probe.
Is the probe waterproof?
The housing is described as waterproof stainless steel, which protects the sensor from splashes and damp conditions. The cable entry should still be kept out of standing water.
How long is the cable?
The probe comes with a one-metre, four-core cable.
What is included in the package?
One BME680 stainless steel probe with a one-metre cable. No driver board or connectors are listed.
What pressure range does it cover?
The pressure range is 300 to 1100 hPa, which covers normal surface-level atmospheric readings.

Overview

The BME680 Stainless Steel Probe is an environmental sensing element packaged for real-world installation. Instead of a bare circuit board, the sensor sits inside a stainless steel housing with a one-metre cable, so you can mount it where the air actually is: inside a duct, under a canopy, on a mast or in a damp room. It measures temperature, humidity and barometric pressure and sends the readings over an I²C signal.

At 21 g, the probe is light enough to hang from a bracket or cable tie without extra support. The waterproof stainless steel body is the main practical advantage here, since it protects the sensing element from splashes and condensation that would otherwise shorten the life of an exposed module.

Key Features

  • BME680 sensing element covering temperature, humidity and pressure in one probe
  • Waterproof stainless steel housing for humid, dusty and outdoor placements
  • One-metre cable separating the sensor from your electronics
  • I²C output for connection to common microcontroller and logger boards
  • 300 to 1100 hPa pressure range matching normal atmospheric conditions
  • -40 to +85 °C and 0 to 100% RH operating coverage

Specifications Explained

Supply voltage

The probe is rated for 3.0 to 3.6 VDC. Plan your power rail around that window rather than assuming a 5 V supply will be tolerated.

Signal output

Readings are delivered over I²C, which means two signal lines plus power and ground. The four-core cable matches this arrangement, so wiring is limited to the usual data, clock and supply connections.

Environmental ranges

The 300 to 1100 hPa pressure span covers surface-level atmospheric measurement. The -40 to +85 °C and 0 to 100% RH figures describe where the probe is rated to operate, which is broad enough for cold stores, greenhouses and sheltered outdoor enclosures.

Cable and size

A one-metre cable is a practical compromise: long enough to reach outside an enclosure, short enough to keep I²C signal integrity manageable. The whole probe weighs 21 g.

Compatibility and Requirements

You need a host device with an I²C interface and a regulated supply within 3.0 to 3.6 VDC. Because the probe uses I²C, keep cable runs short and avoid routing the lead alongside high-current wiring. No driver board is described in the product data, so check that your controller can talk to a BME680 directly before ordering.

Typical Uses

  • Weather station pressure, humidity and temperature readings
  • Greenhouse and grow-room climate logging
  • HVAC duct and ventilation monitoring
  • Indoor air quality and building environment projects
  • IoT nodes that need a protected outdoor sensor

What's in the Box

One BME680 stainless steel probe with a one-metre cable.

Quick specs

Item Type
Probe
Model No. / Name
BME680
Rated Voltage (VDC)
3.0 to 3.6
Material
Waterproof stainless steel
Signal Output
I²C
Pressure Range (MPa)
300 – 1100 hPa
See all specifications