Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2.5mm pitch 4-pin female housing connector with a pre-attached 300mm 28 AWG wire. It provides a secure, ready-to-use connection for compact electronics, drones and RC projects.

Key Highlights

  • 2.5mm pitch for standard board-to-wire mating
  • 4-pin female housing for multi-signal connections
  • 300mm 28 AWG wire pre-attached and ready to use
  • Compact and lightweight for tight builds
  • Genuine Boyu part for consistent quality
  • Ideal for repairs, custom harnesses and DIY electronics

Ideal For

  • RC hobbyists building or repairing receivers and flight controllers
  • FPV pilots making custom camera or VTX cables
  • Electronics prototypers working with 2.5mm pitch headers
  • DIY enthusiasts creating custom wiring harnesses
  • Drone builders needing compact signal connections

Buying Tip

Check that your board or device uses a 2.5mm pitch male header, as this female housing will only mate with that spacing.

Elecvora expert review

Our verdict

A practical, ready-to-use connector for small electronics projects. The pre-attached 28 AWG wire saves time, and the 2.5mm pitch is a common standard. However, it is limited to low-current applications and requires a matching male header.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-wired for quick installation
  • Compact 4-pin design
  • Standard 2.5mm pitch
  • Flexible 28 AWG wire
  • Reliable Boyu construction

Cons

  • Mating male connector not included
  • 28 AWG wire not suitable for high current
  • Only one connector per pack

Best for

RC and electronics hobbyists needing a quick 4-pin connection

Not ideal for

High-power applications or those without a 2.5mm pitch male header

Specifications

ManufacturerBoyu
Pitch Spacing (mm)2.5
GenderFemale
No. of Pins4
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x XH-A/AW-2.5mm-4 pin Female Housing Connector with 300mm Wire (28 AWG)

Frequently Asked Questions

What is the pitch of this connector?
The pitch is 2.5mm, meaning the distance between pin centres is 2.5mm. It mates with standard 2.5mm pitch male headers.
Does it come with a male connector?
No, this is a female housing only. You will need a separate 2.5mm pitch male header or plug to mate with it.
What is the wire length and gauge?
The wire is 300mm long and 28 AWG. This gauge is suitable for low-current signals.
Can I use this for power connections?
It is best for low-power signals. For higher currents, consider thicker wire. Always check your project's current requirements.
How many connectors are included?
The package includes one connector with wire, as listed in the contents.
Is soldering required?
The wire ends are bare, so you will need to solder or crimp them to your circuit or terminals.

Overview

The Boyu XH-A/AW is a 4-pin female housing connector with a 2.5mm pitch and a 300mm length of 28 AWG wire already attached. This ready-made assembly is designed for electronics work where a compact, secure connection is needed without the hassle of crimping tiny terminals. The female housing accepts a matching male header or plug, making it suitable for board-to-wire links in drones, RC vehicles, FPV gear and general prototyping.

Key Features

  • 2.5mm pitch: a widely used spacing for board-level connectors, ensuring compatibility with standard 2.5mm headers.
  • 4-pin configuration: supports multiple signals or power lines in one compact housing.
  • Pre-attached 300mm wire: saves assembly time and provides flexibility for routing.
  • 28 AWG wire: thin and flexible, ideal for tight spaces and low-current applications.
  • Female housing: protects pins and provides a secure mating connection.
  • Boyu quality: manufactured by a trusted name in electronic connectors.

Specifications Explained

The 2.5mm pitch is the distance between the centres of adjacent pins. This is a common standard, so the connector will mate with 2.5mm pitch male headers. The 4-pin design allows you to transmit up to four separate signals or a combination of power and ground. The 28 AWG wire gauge is relatively thin, meaning it is best suited to low-current signals rather than high-power loads. The 300mm wire length gives you enough reach for most small projects while remaining easy to manage. The female housing is the receptacle side, so it accepts pins from a male connector.

Compatibility and Requirements

This connector is intended for use with 2.5mm pitch male headers or plugs. It does not include a mating male connector, so you will need the corresponding part. The wire is bare, so you will need to solder or crimp it to your circuit or use a suitable terminal. No special tools are required beyond standard soldering equipment. Always check the current and voltage requirements of your project to ensure the 28 AWG wire is adequate.

Typical Uses

This connector is commonly used in RC receivers, flight controllers, FPV cameras and transmitters, as well as in DIY electronics projects such as Arduino and Raspberry Pi add-ons. It is also handy for repairing existing wiring harnesses or creating custom cables for drones and robots. Because it is pre-wired, it is especially useful for quick repairs or prototypes where time is limited.

What's in the Box

1 x XH-A/AW-2.5mm-4 pin Female Housing Connector with 300mm Wire (28 AWG).

Quick specs

Manufacturer
Boyu
Pitch Spacing (mm)
2.5
Gender
Female
No. of Pins
4
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications