
1 / 3 · Click to enlarge
AI Summary
A 30 cm USB-C female to USB-C male cable with an inline on/off switch, letting you power your Raspberry Pi 4 up and down without pulling the plug. The rubber-feel switch includes a red LED power indicator.
Key Highlights
- Inline on/off switch with a solid click action and rubber feel
- Red LED indicator shows when power is passing through
- USB-C female input, USB-C male output for your existing power supply
- Compact 30 cm total length including both connectors
- Tested for compatibility with the Raspberry Pi 4
- Power and charging only, no data transfer
Ideal For
- Raspberry Pi 4 owners who power-cycle their board often
- Makers building the Pi into enclosures or desk setups
- Bench users who want a switch on a USB-C power lead
- Anyone adding a switched charging cable for USB-C devices
Buying Tip
Check that your power supply has a USB-C output plug, since this cable's female end is what receives it, and remember it carries power only.
Elecvora expert review
Our verdict
A neat, low-cost convenience item that saves wear on the Pi's USB-C port and makes power cycling a one-click action. It is a power-only lead, so judge it on that basis rather than as a data cable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Removes repeated plugging and unplugging at the board
- Clear click action with a red LED power indicator
- Works with an existing USB-C power supply
- Short 30 cm length keeps wiring tidy
Cons
- No data transfer support
- Not intended for smartphones
- Requires a separate USB-C power supply, which is not included
Best for
Raspberry Pi 4 owners who want a simple inline power switch
Not ideal for
Data transfer or smartphone charging duties
Specifications
| Compatibility | Pi 4 |
|---|---|
| Color | Black |
| Connector Type | Type C Female to Type C Male |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 10 × 10 × 2 cm |
What's in the box
- 1 x Type-C Male to Female Cable with Switch for Raspberry Pi 4
Frequently Asked Questions
Does this cable work with the Raspberry Pi 4?
Can I use my existing Raspberry Pi power supply?
Does it transfer data?
What does the red LED show?
How long is the cable?
Can I use it with a smartphone?
Overview
The Type-C Male to Female Cable with Switch for Raspberry Pi 4 is a short inline power lead that adds a physical on/off switch to your existing USB-C supply. Instead of pulling the connector out of the board every time you want to shut down or restart, you leave the cable connected and use the switch. The switch has a rubberised feel and a clear click-on, click-off action, and a small red LED shows when power is being passed through.
With a USB-C female connector on one end and a USB-C male connector on the other, the cable sits between your power supply and your device. Total length including connectors is about 30 cm, so it stays close to the board rather than adding a loose loop of cable to your desk or enclosure.
Key Features
- Inline power switch: cut and restore power with a single click, no plugging and unplugging.
- Red LED indicator: a quick visual check that power is flowing.
- USB-C female to USB-C male: designed to work with a USB-C power supply you already own.
- Short 30 cm run: measured end to end, connectors included.
- Black finish: blends in with typical Pi builds and desk setups.
- Tested for the Raspberry Pi 4: validated against that board specifically.
Specifications Explained
Connector orientation matters here: the female end receives your power supply's USB-C plug, and the male end goes into the device. Because the switch sits between them, the power supply stays plugged into the cable rather than the board.
Length is roughly 30 cm including both connectors, which suits a Pi sitting next to its supply or inside a case where excess cable would be awkward.
Weight and packed size are modest at about 0.02 kg shipping weight and 10 x 10 x 2 cm packed, so it is easy to store as a spare or add to an order.
Power only: this cable does not carry data. Treat it as a switched charging and powering lead, not a link for drives, displays or programming.
Compatibility and Requirements
The cable is designed and tested for the Raspberry Pi 4 and needs a USB-C power supply to feed the female end. It may not behave well with smartphones, so it is best kept for the Pi and similar USB-C powered devices. No data connection is supported.
Typical Uses
- Power-cycling a Raspberry Pi 4 during projects and testing without touching the board connector.
- Adding a switch to a USB-C charging lead for small powered devices.
- Keeping a bench or enclosure setup tidy with a short, switched lead.
What's in the Box
One Type-C male to female cable with switch for Raspberry Pi 4.
Quick specs
- Compatibility
- Pi 4
- Color
- Black
- Connector Type
- Type C Female to Type C Male
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 10 × 10 × 2 cm















